- limit AID_SYSTEM uid or gid to read security buffer messages
- adjust liblog tests to reflect the reality of this adjustment
To fully test all security buffer paths and modes
$ su 0,0,0 /data/nativetest/liblog-unit-tests/liblog-unit-tests --gtest_filter=liblog.__security*
$ su 1000,1000,1000 /data/nativetest/liblog-unit-tests/liblog-unit-tests --gtest_filter=liblog.__security*
$ su 2000,2000,2000 /data/nativetest/liblog-unit-tests/liblog-unit-tests --gtest_filter=liblog.__security*
ToDo: Integrate the above individually into the gTest Q/A testing
Bug: 26029733
Change-Id: Idcf5492db78fa6934ef6fb43f3ef861052675651
Without this change LogBuffer::prune and LogBuffer::erase
contributes 16.7% and 1.79% respectively. With this change,
they contributes 3.06 and 2.33% respectively. Pruning is
performed roughly 1 in every 255 log entries, a periodic
tamer latency spike.
Bug: 23685592
Change-Id: I6ae1cf9f3559bca4cf448efe8bcb2b96a1914c54
Use 1972 as a right delineation. Otherwise use half way point
between the monotonic and realtime. Treat correction factor as
unsigned, ensure that any wrapping to a negative value is
dropped or set to EPOCH. Acknowledge that we can get a more
accurate time track by acquiring the time rather than relying on
healthd timestamp.
Bug: 26331432
Change-Id: I09075fca58676a30cf7d87baf2d4b0f53795abaa
- Add a new statistic that reports per pid and log_id for AID_SYSTEM
- Add a new pruning filter ~1000/! boolean
- Use this new statistic to prune on worst pid within AID_SYSTEM
Bug: 26029733
Bug: 21615139
Bug: 22855208
Change-Id: Iab5dd28f807dcf03d276372853883f3b6afa8294
Primarily gives access to the Chattiest TIDs and TAGs
associated with a pid.
Has a secondary effect of allowing us to pull out the
command line, comm and in some cases the associated
PACKAGE for a specific pid while the logs are still
present even if the executable is gone.
Bug: 26029733
Bug: 21615139
Change-Id: I1ea63165a680a9318360579b70b1512078ed5682
if ro.logd.timestamp or persist.logd.timestamp are set to the value
monotonic then liblog writer, liblog printing and logd all switch to
recording/printing monotonic time rather than realtime. If reinit
detects a change for presist.logd.timestamp, correct the older entry
timestamps in place.
ToDo: A corner case condition where new log entries in monotonic time
occur before logd reinit detects persist.logd.timestamp, there
will be a few out-of-order entries, but with accurate
timestamps. This problem does not happen for ro.logd.timestamp
as it is set before logd starts.
NB: This offers a nano second time accuracy on all log entries
that may be more suitable for merging with other system
activities, such as systrace, that also use monotonic time. This
feature is for debugging.
Bug: 23668800
Change-Id: Iee6dab7140061b1a6627254921411f61b01aa5c2
Chatty logs would distort the average log size by elevating the
elements, but not the size. Add statistical collection for the
number of elements that report chatty, and subtract that from
the number of elements to improve the pruning estimate. Pick
minElements as 1% rather than 10% of the total with this more
accurate number of elements, to a minumum of 4.
Bug: 24511000
Change-Id: I3f36558138aa0b2a50e4fac6440c3a8505d95276
- switch to coalesce instead of merge in naming of functions
and variables. Confusing since we also to merge-sorts and
other activities in the logger.
- define maxPrune rather than using a number in the code path.
Bug: 24511000
- Propagate to caller the clearing errors, busy blocked by reader.
- For clear, perform retries within logd with a one second lul each,
telling readers to skip, but on final retry to kill all readers if
problem still persists due to block reader (or high volume logspammer).
Bug: 23711431
Change-Id: Ie4c46bc9480a7f49b96a81fae25a95c603270c33
Simplify table generation by placing the line and header formatting
into each type's (UID, PID, TID) object. Switch to const return
values for the ownership passing functions (*ToName() functions
and methods). Use longer variable names to reduce confusion.
Switch from LINES To NUM for pruned column as that more accurately
reflects what is dropped since one entry can contain several lines.
Bug: 22855208
Change-Id: Ib110dce98a68cf5f844eb30f8a192a1f691eeba2
With part deux we caused an apparent regression by not checking for
stale recorded iterators. This checking was on-purpose bypassesed
when leading prune entries were to be deleted without touching the
statistics engine due to an in-place merge.
Part deux had us leaving iterators we were not focussed on untouched
which in turn because they were left behind, had a much higher
likelihood of being deleted without touching the statistics engine.
Perform the check every delete.
Bug: 23789348
Change-Id: Idc6cc23d1f9e3b6cd9a083139a0de59479fbfe08
Hold on to last worst uid watermark and bypass a spike to O(n*n*x)
(n=samples, x=number of spammers) wrt chatty trimming.
Bug: 23327476
Change-Id: I9f21ce95e969b67e576417a760f75c4d86acf364
Quick low-risk to resolve possible hash table corruption.
Resolved an unlikely path memory leak.
ToDo: replace lock with nested lock so no lock
helpers are required.
Bug: 22068332
Change-Id: I303ab06608502c7d61d42f111a9c43366f184d0c
- Report applications UID, TID/PID by name.
- change wording to have an accurate connotation
- drop privilege check since filtered upstream
Bug: 19608965
Bug: 20334069
Bug: 20370119
Change-Id: I2b1c26580b4c2de293874214ff5ae745546f3cca
Add a return value for the ::log() methods, this allows
us to optimize the wakeup for the readers to only occur
when the log message is actually placed.
This is for a future where we may dedupe identical log
messages, filter out log messages, and certainly if we
filter the messages out with an internal logd check of
__android_log_is_loggable().
Change-Id: I763b2a7c29502ab7fa0a5d5022c7b60244fcfde4
- Go back to basic requirements
- Simplify
- use hash tables to minimize memory impact
Bug: 19608965
Change-Id: If7becb34354d6415e5c387ecea7d4109a15259c8
- switch to simpler and faster internal sequence number, drops
a syscall overhead on 32-bit platforms.
- add ability to break-out of flushTo loop with filter return -1
allowing in reduction in reader overhead.
Change-Id: Ic5cb2b9afa4d9470153971fc9197b07279e2b79d
This forward port reverts
commit e457b74ce6
No longer as necessary once we add
liblog: Instrument logging of logd write drops
Although this provided an indication of how close statistically we
were to overloading logd it is simpler to understand fails thus to
hunt and peck a corrected value for /proc/sys/net/unix/max_dgram_qlen
Change-Id: I2b30e0fc30625a48fd11a12c2d2cc6a41f26226f
- simplify access and control exposure to class list
- indent
- compile warning
- Follow standard naming convention for variables and methods
- merge common fragments
- Side Effects: none
Change-Id: I74796043ac34753c6dd10018719ebc0bcd94e010
* Only enabled for dev builds because halves performance.
- Used to establish if /proc/sys/net/unix/max_dgram_qlen
is appropriate for the platform
(see logd/LogStatistics.cpp comments)
- enabled if logd.dgram_qlen.statistics is not zero/empty
Change-Id: Ib8ecfeb75b6f0f954c099a6b1032b8afb5efcbd4
- liblog android_logger_get_log_size and android_logger_get_readable_size
adjusted to return long instead of int because of -G flag extending range
NB: ifdef'd only for userdebug and eng builds
- liblog Add android_logger_[sg]et_prune_list and android_logger_set_log_size
- logcat Add -P, -p and -G flags
- logd Add LogWhiteBlackList and configurable log size
(cherry picked from commit 18a5432158)
Change-Id: I1572338c1b34bd968ad7867857ef708156ec3b6a
- structure packing
- move towards log_time from struct timespec
- extend log_time to cover differences between
log_time and struct timespec
Change-Id: I106ed0b609917306d170044054b5b32645f2a295
* Create a new userspace log daemon for handling logging messages.
Original-Change-Id: I75267df16359684490121e6c31cca48614d79856
Signed-off-by: Nick Kralevich <nnk@google.com>
* Merge conflicts
* rename new syslog daemon to logd to prevent confusion with bionic syslog
* replace racy getGroups call with KISS call to client->getGid()
* Timestamps are filed at logging source
* insert entries into list in timestamp order
* Added LogTimeEntry tail filtration handling
* Added region locking around LogWriter list
* separate threads for each writer
* /dev/socket/logd* permissions
Signed-off-by: Mark Salyzyn <salyzyn@google.com>
(cherry picked from commit 3e76e0a497)
Author: Nick Kralevich <nnk@google.com>
Change-Id: Ice88b1412d8f9daa7f9119b2b5aaf684a5e28098
