This hasn't helped investigating the issue, and the issue itself isn't
a problem anymore, so we remove these logs.
Bug: 155203339
Test: reboot
Change-Id: I20e51d8fcad5572906a8d556bec8a8dee4522834
While mount_all and umount_all were updated to use ro.boot.fstab_suffix,
I neglected to update swapon_all. Trivially copied from umount_all.
Bug: 142424832
Change-Id: Icd706fe7a1fe16c687cd2811b0a3158d7d2e224e
Merged-In: Icd706fe7a1fe16c687cd2811b0a3158d7d2e224e
Currently the ReadDefaultFstab function, which calls GetFstabPath,
makes some assumptions about what the fstab will be called and where
it is located. This is being used by vold to set up userdata encryption
and for gsid, and is even used in the default boot control HAL, so it
has become quite baked.
The original way for a board to specify things to mount was to use the
"mount_all /path/to/fstab" command in init.rc. However, due to the
above functionality, the path after mount_all is no longer very useful,
as it cannot differ from the inferred path, or userdata encryption and
other features will be broken.
On Cuttlefish, we have an interest in being able to test alternative
userdata configurations (ext4 vs f2fs, encryption on/off, etc.) and
currently the only way to achieve this is to either a) modify the
ro.hardware or ro.hardware.platform properties, which breaks a bunch
of things like default HAL filenames, or regenerate our odm.img or
vendor.img filesystems. We can't simply install another fstab and
point to it with "mount_all".
This change allows the fstab path to be omitted from "mount_all", and
adds another property which overrides the existing checks for
fstab.${ro.hardware} and fstab.${ro.hardware.platform}. Specifying
${ro.boot.fstab_suffix} will cause fstab.${ro.boot.fstab_suffix}
to be checked first.
Bug: 142424832
Test: booted cuttlefish with 'mount_all ${ro.hardware} --late'
Test: booted cuttlefish with 'mount_all --late'
Test: booted cuttlefish with 'mount_all --late' and fstab_suffix=f2fs
Test: partially booted cuttlefish with 'mount_all ${ro.hardware}'
Test: partially booted cuttlefish with 'mount_all'
Change-Id: I3e10f66aecfcd48bdb9ebf1d304b7aae745cbd3c
There are devices stuck waiting for vendor_init to finish a command,
without giving much more information. Instead of setting aside the
last run command, it's more valuable to store and dump the last 30
logs seen.
Bug: 155203339
Test: these logs appear during hung reboots
Test: normal reboots have no difference.
Change-Id: I99cae248eb81eaf34ef66b910fa653a9fa135f68
Users of libinit_test_utils must include all libraries that it uses.
If it uses libinit, then there is a large number of libraries that
must be included. To avoid this, make libinit_test_utils only use
init_common_sources and the small number of required libraries that go
along with those sources. Additionally, expose these sources as a
default for users of libinit_test_utils.
Test: build
Change-Id: I224fa7e0590d073e4cd40412b5dcb6f72a64b6bf
Init is no longer a special case and talks to property service just
like every other client, therefore move it away from property_set()
and to android::base::SetProperty().
In doing so, this change moves the initial property set up from the
kernel command line and property files directly into PropertyInit().
This makes the responsibilities between init and property services
more clear.
Test: boot, unit test cases
Change-Id: I36b8c83e845d887f1b203355c2391ec123c3d05f
Previously, we assumed that TriggerShutdown() should never be called
from vendor_init and used property service as a back up in case it
ever did. We have since then found out that vendor_init may indeed
call TriggerShutdown() and we want to make it just as strict as it is
in init, wherein it will immediately start the shutdown sequence
without executing any further commands.
Test: init unit tests, trigger shuttdown from init and vendor_init
Change-Id: I1f44dae801a28269eb8127879a8b7d6adff6f353
FscryptSetDirectoryPolicy no longer tries to infer the action from the
filename. Well mostly; it still assumes top-level directories in /data
should be encrypted unless the mkdir arguments say otherwise, but
it warns.
Bug: 26641735
Test: boot, check log messages
Change-Id: Id6d2cea7fb856f17323897d85cf6190c981b443c
It wasn't clear to me why init was rebooting until I saw that it was
SIGABRT, which then made me read through earlier log spam to work out
what was actually unhappy (the SELinux compiler, in my case).
Test: worked out why init was rebooting my device
Change-Id: I605d8956213c4c23711073fd4b0ff99562b7f351
Host init verifier already checks that the names and number of
arguments for builtins are correct, but it can check more. This
change ensures that property expansions are well formed, and that
arguments that can be parsed on the host are correct. For example it
checks that UIDs and GIDs exist, that numerical values can be parsed,
and that rlimit strings are correct.
Test: build
Change-Id: Ied8882498a88a9f8324db6b8d1020aeeccc8177b
It's better to pass the error message to the caller to determine how
best to print the error.
Test: build
Change-Id: Id8857c459df2f26c031650166609608d20e4d051
clang-tidy hinted that some of this code wasn't right. Looking
deeper, there is really not much related to file and socket
descriptors, except that they're published in similar ways to the
environment. All of the abstraction into a 'Descriptor' class takes
us further away from specifying what we really mean.
This removes that abstraction, adds stricter checks and better errors
for parsing init scripts, reports sockets and files that are unable to
be acquired before exec, and updates the README.md for the passcred
option.
Test: build, logd (uses files and sockets) works
Change-Id: I59e611e95c85bdbefa779ef69b32b9dd4ee203e2
android-base:
* Add NOLINT for expanding namespace std for std::string* ostream
overload
libdm:
* Fix missing parentesis around macro parameters
init:
* Fix missing CLOEXEC usage and add NOLINT for the intended
usages.
* Fix missing parentesis around macro parameters
* Fix erase() / remove_if() idiom
* Correctly specific unsigned char when intended
* 'namespace flags' should be signed, since 'flags' it signed for
clone()
* Add clear to property restore vector<string> to empty after move
* Explicit comparison against 0 for strcmp
Test: build
Change-Id: I8c31dafda2c43ebc5aa50124cbbd6e23ed2c4101
By moving it into builtins.cpp..., but that's less bad than it is
now, especially since this is defunct in code targeting Q+. Remove
the guards that init.h isn't being included by other files too as it's
not useful anymore.
Test: build
Change-Id: Ic564fcff9e8716ec924098b07a8c9d94ca25f960
Now that Result<T> is actually expected<T, ...>, and the expected
proposal states expected<void, ...> as the way to indicate an expected
object that returns either successfully with no object or an error,
let's move init's Result<Success> to the preferred Result<void>.
Bug: 132145659
Test: boot, init unit tests
Change-Id: Ib2f98396d8e6e274f95a496fcdfd8341f77585ee
This change factors out functions that handle selabels from
selinux.h/cpp into selabel.h/cpp. This allows util.cpp to be used by
the upcoming native zygote without a bunch of define flags that are
required for selinux.cpp.
Bug: 133443795
Test: Build and boot cuttlefish.
Change-Id: Ie238a96c6407c6698a605dd8803c1727abfaae7b
Currently, if init encounters a fatal issues it reboots to fastboot
but this may be not desirable in all cases, especially the case of
critical services crashing. Therefore this change adds the ability
for vendors to customize the reboot target via the
androidboot.init_fatal_reboot_target= kernel command line.
This applies to all LOG(FATAL) messages as well as fatal signals in
userdebug/eng builds, except for signals before logging is enabled in
first stage init.
Bug: 121006328
Test: device reboots to configurable target with LOG(FATAL)
Test: device reboots to configurable target after a segfault in the
various stages of init
Test: device reboots to fastboot without a configured target
Change-Id: I16ea9e32e2fee08dece3d33b697d7a08191d607b
Dump init stacks when aborting either due to LOG(FATAL) or in
userdebug/eng builds due to signals, including signals from
sanitizers.
Doesn't work for static first stage init yet, b/133450393 tracks
that.
Also, ensure that LOG(FATAL) in child processes calls abort() in all
stages of init, not just 2nd stage init.
Bug: 131747478
Test: abort init in various ways and see stacks
Test: hang or crash in backtrace handler and see child reboot
Change-Id: Ib53b5d3e7e814244203f875de016ada9900dfce8
This CL fixes the design problem of the previous mechanism for providing
the bootstrap bionic and the runtime bionic to the same path.
Previously, bootstrap bionic was self-bind-mounted; i.e.
/system/bin/libc.so is bind-mounted to itself. And the runtime bionic
was bind-mounted on top of the bootstrap bionic. This has not only caused
problems like `adb sync` not working(b/122737045), but also is quite
difficult to understand due to the double-and-self mounting.
This is the new design:
Most importantly, these four are all distinct:
1) bootstrap bionic (/system/lib/bootstrap/libc.so)
2) runtime bionic (/apex/com.android.runtime/lib/bionic/libc.so)
3) mount point for 1) and 2) (/bionic/lib/libc.so)
4) symlink for 3) (/system/lib/libc.so -> /bionic/lib/libc.so)
Inside the mount namespace of the pre-apexd processes, 1) is
bind-mounted to 3). Likewise, inside the mount namespace of the
post-apexd processes, 2) is bind-mounted to 3). In other words, there is
no self-mount, and no double-mount.
Another change is that mount points are under /bionic and the legacy
paths become symlinks to the mount points. This is to make sure that
there is no bind mounts under /system, which is breaking some apps.
Finally, code for creating mount namespaces, mounting bionic, etc are
refactored to mount_namespace.cpp
Bug: 120266448
Bug: 123275379
Test: m, device boots, adb sync/push/pull works,
especially with following paths:
/bionic/lib64/libc.so
/bionic/bin/linker64
/system/lib64/bootstrap/libc.so
/system/bin/bootstrap/linker64
Change-Id: Icdfbdcc1efca540ac854d4df79e07ee61fca559f
It looks like this code is dead currently. From history, this was
meant to be used as a way to check that the recovery image is what was
expected during runtime, but that effort never completed, and we have
full verification of the recovery image when booting into recovery
anyway.
The code is functionally dead as is too, since /recovery doesn't
actually exist in any fstab, since recovery is either mounted as a
ramdisk during recovery or not mounted during normal boot.
Test: boot
Change-Id: I48cd324ef0d5a163db2df2648f6042174b83f10e
The kernel opens /dev/console and uses that fd for stdin/stdout/stderr
if there is a serial console enabled and no initramfs, otherwise it
does not provide any fds for stdin/stdout/stderr. InitKernelLogging()
is used to close these existing fds if they exist and replace them
with /dev/null.
Currently, InitKernelLogging() is only called in second stage init,
which means that processes exec'ed from first stage init will inherit
the kernel provided fds if any are provided.
In the case that they are provided, the exec of second stage init
causes an SELinux denial as it does not have access to /dev/console.
In the case that they are not provided, exec of any further process is
potentially dangerous as the first fd's opened by that process will
take the stdin/stdout/stderr fileno's, which can cause issues if
printf(), etc is then used by that process.
Lastly, simply moving InitKernelLogging() to first stage init is not
enough, since first stage init still runs in kernel context and future
child processes will not have permissions to access kernel context
resources. Therefore, it must be done for a second time in second
stage init.
Bug: 117281017
Test: no audits when booting marlin.
Change-Id: If27edab5c32b27765e24c32fbed506ef625889de
We're moving past a world where static executables are needed,
including watchdogd, so treat this like any other executable and place
it in /system/bin.
Bug: 73660730
Test: watchdogd still runs
Change-Id: I1f7508fd55dce6e9ee72a6ab7a085011a76c0053
Create a host side parser for init such that init rc files can be
verified for syntax correctness before being used on the device.
Bug: 36970783
Test: run the parser on init files on host
Change-Id: I7e8772e278ebaff727057308596ebacf28b6fdda
Init currently sets the SELinux context on a mkdir but not on
other operations. This patch modifies it to do so when creating
symlinks, writing to a file, or copying a file.
Test: Built, flashed, and booted. Added fake init entries and
verified that they received the proper SELinux context.
Change-Id: I836b570fef81d74f3b6c8e7ce0274e94ca7b12d3
Test: boot bullhead
Test: Introduce LOG(FATAL) at various points of init and ensure that
it reboots to the bootloader successfully
Test: Introduce LOG(FATAL) during DoReboot() and ensure that it reboots
instead of recursing infinitely
Test: Ensure that fatal signals reboot to bootloader
Change-Id: I409005b6fab379df2d635e3e33d2df48a1a97df3
init tries to propagate error information up to build context before
logging errors. This is a good thing, however too often init has the
overly verbose paradigm for error handling, below:
bool CalculateResult(const T& input, U* output, std::string* err)
bool CalculateAndUseResult(const T& input, std::string* err) {
U output;
std::string calculate_result_err;
if (!CalculateResult(input, &output, &calculate_result_err)) {
*err = "CalculateResult " + input + " failed: " +
calculate_result_err;
return false;
}
UseResult(output);
return true;
}
Even more common are functions that return only true/false but also
require passing a std::string* err in order to see the error message.
This change introduces a Result<T> that is use to either hold a
successful return value of type T or to hold an error message as a
std::string. If the functional only returns success or a failure with
an error message, Result<Success> may be used. The classes Error and
ErrnoError are used to indicate a failed Result<T>.
A successful Result<T> is constructed implicitly from any type that
can be implicitly converted to T or from the constructor arguments for
T. This allows you to return a type T directly from a function that
returns Result<T>.
Error and ErrnoError are used to construct a Result<T> has
failed. Each of these classes take an ostream as an input and are
implicitly cast to a Result<T> containing that failure. ErrnoError()
additionally appends ": " + strerror(errno) to the end of the failure
string to aid in interacting with C APIs.
The end result is that the above code snippet is turned into the much
clearer example below:
Result<U> CalculateResult(const T& input);
Result<Success> CalculateAndUseResult(const T& input) {
auto output = CalculateResult(input);
if (!output) {
return Error() << "CalculateResult " << input << " failed: "
<< output.error();
}
UseResult(*output);
return Success();
}
This change also makes this conversion for some of the util.cpp
functions that used the old paradigm.
Test: boot bullhead, init unit tests
Merged-In: I1e7d3a8820a79362245041251057fbeed2f7979b
Change-Id: I1e7d3a8820a79362245041251057fbeed2f7979b
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
On platforms that use ACPI instead of Device Tree (DT), such as
Ranchu x86/x86_64, /proc/device-tree/firmware/android/ does not
exist. As a result, Android O is unable to mount /system, etc.
at the first stage of init:
init: First stage mount skipped (missing/incompatible fstab in
device tree)
Those platforms may create another directory that mimics the layout
of the standard DT directory in procfs, and store early mount
configuration there. E.g., Ranchu x86/x86_64 creates one in sysfs
using information encoded in the ACPI tables:
https://android-review.googlesource.com/442472https://android-review.googlesource.com/443432https://android-review.googlesource.com/442393https://android-review.googlesource.com/442395
Therefore, instead of hardcoding the Android DT path, load it from
the kernel command line using a new Android-specific property key
("androidboot.android_dt_dir"). If no such property exists, fall
back to the standard procfs path (so no change is needed for DT-
aware platforms).
Note that init/ and fs_mgr/ each have their own copy of the Android
DT path, because they do not share any global state. A future CL
should remove the duplication by refactoring.
With this CL as well as the above ones, the said warning is gone,
but early mount fails. That is a separate bug, though, and will be
addressed by another CL.
Test: Boot patched sdk_phone_x86-userdebug system image with patched
Goldfish 3.18 x86 kernel in patched Android Emulator, verify
the "init: First stage mount skipped" warning no longer shows
in dmesg.
Change-Id: Ib6df577319503ec1ca778de2b5458cc72ce07415
Signed-off-by: Yu Ning <yu.ning@intel.com>
We have been seeing panics and errors during shutdown sequence in
some vendor's platform, and it is required to disable error handling
during shutdown.
This CL separates the shutdown request to execute another "shutdown"
trigger at the beginning of shutdown stage. And vendor can use this
trigger to add custom commands needed for shutting down gracefully.
Bug: 38203024
Bug: 62084631
Test: device reboot/shutdown
Change-Id: I3fac4ed59f06667d86e477ee55ed391cf113717f
restorecon() has become nothing more than a small wrapper around
selinux_android_restore(). This itself isn't super problematic, but
it is an obstacle for compiling util.cpp on the host as that function
is not available on the host.
Bug: 36970783
Test: Boot bullhead
Merged-In: I7e209ece6898f9a0d5eb9e5d5d8155c2f1ba9faf
Change-Id: I7e209ece6898f9a0d5eb9e5d5d8155c2f1ba9faf
In the init scripts for socket, the type can have a suffix of
"+passcred" to request that the socket be bound to report SO_PASSCRED
credentials as part of socket transactions.
Test: gTest logd-unit-tests --gtest_filter=logd.statistics right after boot
(fails without logd.rc change)
Bug: 37985222
Change-Id: Ie5b50e99fb92fa9bec9a32463a0e6df26a968bfd
Their callers may be able to add more context, so use an error string
to record the error.
Bug: 38038887
Test: boot bullhead
Test: Init unit tests
Change-Id: I46690d1c66e00a4b15cadc6fd0d6b50e990388c3
Check the result of DecodeUid() and return failure when uids/gids are
unable to be decoded.
Also, use an error string instead of logging directly such that more
context can be added when decoding fails.
Bug: 38038887
Test: Boot bullhead
Test: Init unit tests
Change-Id: I84c11aa5a8041bf5d2f754ee9af748344b789b37
Init exposes a global 'sehandle' that ueventd references as part of
devices.cpp and util.cpp. This is particularly dangerous in
device_init() in which both uevent and init write to this global.
This change creates a separate local copy for devices.cpp and puts
restrictions on where init.h can be included to make sure the global
used by init is not reference by non-init code. Future changes to
init should remove this global.
Test: Boot bullhead
Change-Id: Ifefa9e1932e9d647d06cca2618f5c8e5a7a85460
Also renames "early mount" to "first stage mount" to prevent confusion
with "mount_all --early", which is run in the init second stage.
Also creates a base class: FirstStageMount and two derived classes:
FirstStageMountVBootV1 and FirstStageMountVBootV2 to replace/refactor
existing functions:
- early_mount() -> DoFirstStageMount() and FirstStageMount::DoFirstStageMount()
- vboot_1_0_early_partitions -> FirstStageMountVBootV1::GetRequiredDevices()
- vboot_2_0_early_partitions -> FirstStageMountVBootV2::GetRequiredDevices()
- vboot_1_0_mount_partitions ->
FirstStageMount::MountPartitions() and
FirstStageMountVBootV1::SetUpDmVerity()
- vboot_2_0_mount_partitions ->
FirstStageMount::MountPartitions() and
FirstStageMountVBootV2::SetUpDmVerity()
Bug: 37413399
Test: first stage mount /vendor with vboot 2.0 (avb) on bullhead
Test: first stage mount /system with without verity on bullhead
Test: first stage mount /vendor with with vboot 1.0 on sailfish
Change-Id: I6584bdf7d832c9fbc8740f97c9b8b94e68a90783
Remove includes of "log.h" that really want <android-base/logging.h>
Fix header include order
Remove headers included in .cpp files that their associated .h already includes
Remove some unused headers
Test: boot bullhead
Change-Id: I2b415adfe86a5c8bbe4fb1ebc53c7b0ee2253824
this will make the implementation more cleaner,
and has error message output when failed on some operations
also add the O_TRUNC flag explicitly for the open function
called in write_file.
And add more test on read_file and write_file functions
Bug: 36726045
Test: manual with hikey
Test: boot and init tests on bullhead
Test: cast with fugu, per b/36726045
Merged-In: If3c30a2fff58cfece2fcd27e69c30382146e6808
Change-Id: If3c30a2fff58cfece2fcd27e69c30382146e6808
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
The content parameter of write_file() previously took a char* that was
then converted to a std::string in WriteStringToFd(). One unfortunate
effect of this, is that it is impossible to write data that contains
'\0' within it, as the new string will only contain characters up
until the '\0'.
This changes write_file() to take an std::string, such that
std::string::size() is used to determine the length of the string,
allowing it to contain null characters.
Also change the path parameter of read_file() and write_file() for
consistency.
Lastly, add a test for handling strings with '\0' in them.
Bug: 36726045
Test: Boot bullhead, run unit tests
Change-Id: Idad60e4228ee2de741ab3ab6a4917065b5e63cd8
