Previously we set ro.boot.avb_version during the first stage mount in normal mode:
- https://android-review.googlesource.com/#/c/371774/
As the first stage mount is not performed in recovery mode, we need to set the
property separately in recovery mode.
Bug: 37414003
Test: first stage mount /vendor with vboot 2.0 (avb) on bullhead in normal mode
Test: first stage mount /system with without verity on bullhead in normal mode
Test: checks ro.boot.avb_version is 1.0 on bullhead in recovery mode
Test: first mount /vendor with with vboot 1.0 on sailfish in normal mode
Test: checks ro.boot.avb_version doesn't exist on sailfish in recovery mode
Change-Id: I262e75b8b557c4de7609b4049ccb01793644245e
Also renames "early mount" to "first stage mount" to prevent confusion
with "mount_all --early", which is run in the init second stage.
Also creates a base class: FirstStageMount and two derived classes:
FirstStageMountVBootV1 and FirstStageMountVBootV2 to replace/refactor
existing functions:
- early_mount() -> DoFirstStageMount() and FirstStageMount::DoFirstStageMount()
- vboot_1_0_early_partitions -> FirstStageMountVBootV1::GetRequiredDevices()
- vboot_2_0_early_partitions -> FirstStageMountVBootV2::GetRequiredDevices()
- vboot_1_0_mount_partitions ->
FirstStageMount::MountPartitions() and
FirstStageMountVBootV1::SetUpDmVerity()
- vboot_2_0_mount_partitions ->
FirstStageMount::MountPartitions() and
FirstStageMountVBootV2::SetUpDmVerity()
Bug: 37413399
Test: first stage mount /vendor with vboot 2.0 (avb) on bullhead
Test: first stage mount /system with without verity on bullhead
Test: first stage mount /vendor with with vboot 1.0 on sailfish
Change-Id: I6584bdf7d832c9fbc8740f97c9b8b94e68a90783
Start a init_tests.cpp file for end-to-end tests that parse small init script
segments and verify that they act as expected.
The first tests ensure that the execution order of event triggers
happens appropriately.
Test: Boot bullhead, run unit tests
Change-Id: Ic446c02605ab796fd41e0596ce1fd381aee80ce0
Remove the dependency on Action and Service from what should be a
generic Parser class.
Make ActionParser, ImportParser, and ServiceParser take a pointer to
their associated classes instead of accessing them through a
singleton.
Misc fixes to SectionParser Interface:
1) Make SectionParser::ParseLineSection() non-const as it always should
have been.
2) Use Rvalue references where appropriate
3) Remove extra std::string& filename in SectionParser::EndFile()
4) Only have SectionParser::ParseSection() as pure virtual
Document SectionParser.
Make ImportParser report the filename and line number of failed imports.
Make ServiceParser report the filename and line number of duplicated services.
Test: Boot bullhead
Change-Id: I86568a5b375fb4f27f4cb235ed1e37635f01d630
KillProcessGroup can return -1 without errno set, which produces error
messages like this:
init: Sending signal 15 to service 'vold' (pid 1806) process group...
init: failed to kill 2 processes for processgroup 1806
init: killProcessGroup(0, 1806, 15) failed: Success
Test: boot and reboot hikey.
Change-Id: I51f242da234daee84795a3fbdffe9ad1f4567140
Signed-off-by: William Roberts <william.c.roberts@intel.com>
In the past, I had thought it didn't make sense to have multiple
Action classes with identical triggers within ActionManager::actions_,
and opted to instead combine these into a single action. In theory,
it should reduce memory overhead as only one copy of the triggers
needs to be stored.
In practice, this ends up not being a good idea.
Most importantly, given a file with the below three sections in this
same order:
on boot
setprop a b
on boot && property:true=true
setprop c d
on boot
setprop e f
Assuming that property 'true' == 'true', when the `boot` event
happens, the order of the setprop commands will actually be:
setprop a b
setprop e f
setprop c d
instead of the more intuitive order of:
setprop a b
setprop c d
setprop e f
This is a mistake and this CL fixes it. It also documents this order.
Secondly, with a given 'Action' now spanning multiple files, in order
to keep track of which file a command is run from, the 'Command'
itself needs to store this. Ironically to the original intention,
this increases total ram usage. This change now only stores the file
name in each 'Action' instead of each 'Command'. All in all this is a
negligible trade off of ram usage.
Thirdly, this requires a bunch of extra code and assumptions that
don't help anything else. In particular it forces to keep property triggers
sorted for easy comparison, which I'm using an std::map for currently,
but that is not the best data structure to contain them.
Lastly, I added the filename and line number to the 'processing
action' LOG(INFO) message.
Test: Boot bullhead, observe above changes
Test: Boot sailfish, observe no change in boot time
Change-Id: I3fbcac4ee677351314e33012c758145be82346e9
Currently if a process sets the sys.powerctl property, init adds this
property change into the event queue, just like any other property.
The actual logic to shutdown the device is not executed until init
gets to the action associated with the property change.
This is bad for multiple reasons, but explicitly causes deadlock in
the follow scenario:
A service is started with `exec` or `exec_start`
The same service sets sys.powerctl indicating to the system to
shutdown
The same service then waits infinitely
In this case, init doesn't process any further commands until the exec
service completes, including the command to reboot the device.
This change causes init to immediately handle sys.powerctl and reboot
the device regardless of the state of the event queue, wait for exec,
or wait for property conditions.
Bug: 37209359
Bug: 37415192
Test: Init reboots normally
Test: Update verifier can reboot the system
Change-Id: Iff2295aed970840f47e56c4bacc93001b791fa35
Create classes for dev and sys permissions and store these permissions
in std::vector instead of the C list.
Test: boot bullhead
Test: init unit tests
Change-Id: I874039a3db29b4c70149506da8e407123ab7eca2
Set ro.boot.avb_version to "AVB_VERSION_MAJOR.AVB_VERSION_MINOR".
During Treble OTA match, the major version must be the same as that in
the avb metadata on disk, while the minor version can be equal or
greater to that in the avb metadata on disk.
See how avb versioning work on the following link:
https://android-review.googlesource.com/#/c/342757/
Also renames AvbHashtreeDisabled() -> hashtree_disabled().
Bug: 35322304
Test: Early mount with AVB, checks [ro.boot.avb_version]: [1.0] exists.
Test: Not enable AVB, checks [ro.boot.avb_version] doesn't exists.
Change-Id: I5aaf476ca53c4fe817779518ba14b68ebcfdc6d6
Also simplify this code a bit.
There's only one consumer that removes the /devices/platform prefix,
so have them handle it instead of storing two copies of the string.
Remove an unneeded search for '/' in get_character_device_symlinks()
as a / will always be the next character after a parent path, by
nature of FindPlatformDevice().
Test: boot bullhead
Test: init unit tests
Change-Id: I9d0482d137b1342ae7509ae993ff99198be814f0
fs_mgr_update_verity_state() is invoked by 'verity_update_state' in
init.rc. It will then set property "partition.system.verified" and
"partition.vendor.verified" to verify_mode. We should support this for
AVB as well.
Also change the order of static libs in init to fix the build error
after this change:
system/extras/ext4_utils/ext4_crypt.cpp:69: error: undefined reference to 'property_get'
Bug: 35416769
Test: Mount /system and /vendor with vboot 2.0 (AVB), check the following properties exist.
- [partition.system.verified]: [2]
- [partition.vendor.verified]: [2]
Test: Mount /system and /vendor with vboot 1.0, check the following properties exist.
- [partition.system.verified]: [0]
- [partition.vendor.verified]: [0]
Change-Id: I4328d66a8cb93f26e7960e620a0b2292d5f15900
libavb requires verifying AVB metadata on all verified partitions at
once. For example, /vbmeta, /boot, /system and /vendor. We need to
invoke device_init() for those partitions even if we only want to early
mount some of them, like /vendor and /system.
This CL gets all AVB partitions and the early mount partitions from
device tree through "firmware/android/vbmeta" and "firmware/fstab",
respectively. The following is an example to early mount /vendor
partition on bullhead:
firmware {
android {
compatible = "android,firmware";
vbmeta {
compatible = "android,vbmeta";
parts = "boot,system,vendor";
by_name_prefix="/dev/block/platform/soc.0/f9824900.sdhci/by-name"
};
fstab {
compatible = "android,fstab";
vendor {
compatible = "android,vendor";
dev = "/dev/block/platform/soc.0/f9824900.sdhci/by-name/vendor";
type = "ext4";
mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
fsmgr_flags = "wait,avb";
};
};
};
};
Bug: 33254008
Test: early mount /vendor with vboot 2.0 (AVB) on bullhead
Test: early mount /system without dm-verity on bullhead
Test: early mount /vendor with vboot 1.0 on sailfish
Change-Id: I89a1f77c97124f309346b33d9e700544b92ecf05
Default signature WriteStringToFile creates world-writeable files.
Set owner and group system and remove read/write for non-owner.
Bug: 37251463
Test: Manual: reboot, inspect
Change-Id: I6a29c678168dcae611b120dc52170f4eee7069a9
* changes:
ueventd: Fix up string handling in handle_*_device_event()
ueventd: convert mkdir_recursive() to std::string
ueventd: move subsystem logic from code to ueventd.rc
This was marked deprecated in 2014 and removed in 2015, let's remove
the uevent rule now too.
Test: see that logging still works on bullhead
Change-Id: Idaf3f49a1afe7046eba6c976628b9f1c8b3ec094
- umount operation is asynchronous except for root partition.
Returning from umount does not guarantee completion of
umount. Poll /proc/mounts to confirm completion of umount.
- Treat all devices mounting to /data as emulated devices. This is
future proof when fs other than sdcardfs is used.
- Drop quota sync from sync step. There is no differences in
frequencies of quota error.
- Run umount in reverse order from mounting order so that any
hidden dependency can be auto-resolved.
- Add dump of lsof and /proc/mounts when umount fails. lsof only runs
when selinux is toggled into permissive mode. The dump is enabled
only for non-user build.
- Keep logcat until vold shutdown in case vold has any error to report.
bug: 36551218
Test: python packages/services/Car/tools/bootanalyze/bootanalyze.py -r -c packages/services/Car/tools/bootanalyze/config.yaml -n 1000 -f -e 20 -w 30
Change-Id: I87b17b966d7004c205452d81460b02c6acf50d45
Additionally replace the associated C string parsing with C++ and write
unit tests.
Bug: 33785894
Bug: 36250207
Test: Boot bullhead + unit tests
Change-Id: Iee1f72d248bca3bd2e1227045628935b3dd6195a
Remove includes of "log.h" that really want <android-base/logging.h>
Fix header include order
Remove headers included in .cpp files that their associated .h already includes
Remove some unused headers
Test: boot bullhead
Change-Id: I2b415adfe86a5c8bbe4fb1ebc53c7b0ee2253824
Crashes that happen before tombstoned is running are extremely hard to
diagnose, because tombstones aren't written to disk, and the window of
opportunity to get logs via `adb logcat` is small (potentially
nonexistent).
Solve this by adding a world-writable /dev/kmsg_debug on userdebug
builds, and writing to it in addition to logcat when tombstoned hasn't
started yet.
Bug: http://b/36574794
Test: stop tombstoned; crasher; dmesg
Change-Id: Ib22c02a002afb602933155fb2c9b7a8abbe9ed38
Bug: 36783775
Test: boot device with matching sha256 and non-matching and verify that
device boots and uses either precompiled or compiled policy as needed. Also
verify that mapping_sepolicy.cil has moved.
(cherry-pick of commit: 39ffec779a)
Change-Id: I9c3df2e7ed3f0eadd98e98529ebed360fec66dba
this will make the implementation more cleaner,
and has error message output when failed on some operations
also add the O_TRUNC flag explicitly for the open function
called in write_file.
And add more test on read_file and write_file functions
Bug: 36726045
Test: manual with hikey
Test: boot and init tests on bullhead
Test: cast with fugu, per b/36726045
Merged-In: If3c30a2fff58cfece2fcd27e69c30382146e6808
Change-Id: If3c30a2fff58cfece2fcd27e69c30382146e6808
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
The content parameter of write_file() previously took a char* that was
then converted to a std::string in WriteStringToFd(). One unfortunate
effect of this, is that it is impossible to write data that contains
'\0' within it, as the new string will only contain characters up
until the '\0'.
This changes write_file() to take an std::string, such that
std::string::size() is used to determine the length of the string,
allowing it to contain null characters.
Also change the path parameter of read_file() and write_file() for
consistency.
Lastly, add a test for handling strings with '\0' in them.
Bug: 36726045
Test: Boot bullhead, run unit tests
Change-Id: Idad60e4228ee2de741ab3ab6a4917065b5e63cd8
- Run shutdown animation during shutdown if surfaceflinger is
available / running.
- services necessary for animation should be added to animation
class.
- Keep debugging tools while non-critical services are terminated:
logd, adbd, tombstoned
bug: 36526187
Test: many reboots
Change-Id: I758f700a622c6005f3df9f29de2b55270055ad4d
