Rather than have to create a number of #if defines for the memory
dumping parts of the tombstone, create a single function to generate
these strings for the memory tests.
Make CrasherTest.smoke use a regex that passes on 32 bit and 64 bit.
Make the tests page size agnostic.
Bug: 339017792
Test: Treehugger.
Test: Ran 32 bit and 64 bit versions of tests on a real device.
Test: Ran on the aosp_cf_x86_64_phone_pgagnostic-trunk_staging-userdebug
Change-Id: If9365061b85de23b00a1bf947d85923cde06c068
Add signo for target thread in fallback path;
Update test for seccomp tombstone thread abort.
Bug: 336946834
Test: debuggerd_test
Test: Send fatal signal to process with NO_NEW_PRIVS
Change-Id: Ie9d77a93da9cd89ab7093b8949f311e03d96ec50
\(fault address prefixed with --->)
should be
\(fault address prefixed with --->\)
Test: debuggerd_test
Bug: 175635923
Bug: 327668317
Change-Id: I03bf8969e9818956ae79b916ab852efaf4f2f78a
For the tombstoned.proto test, remove arbitrary sleep and add loop
checking for the file being present.
Bug: 317286869
Test: Ran the tests on device and all pass.
Test: Modify the test and force the timeout to verify the timeout logic.
Change-Id: I9b246c8fee83909459d5c42debdb546794070845
Timeouts in tombstoned.cpp and intercept_manager.cpp are scaled
by HwTimeoutMultiplier, but the timeouts in debuggerd_test.cpp
are not, which means the CrasherTest#intercept_timeout test will
fail for any platform that has a high enough HwTimeoutMultiplier.
Bug: 309532789
Test: debuggerd_test.CrasherTest#intercept_timeout
Change-Id: I83cd01e87644c011efa155a32fd5d92cc8a43a95
While doing this, refactor the intercept code to be easier to understand.
The primary use case for this is to perform a parallel stack dump (both Java and native) for specific ANRs.
Add tests for all of the different intercept conditions.
Modify the tests to display the error message from the intercept
response if there is an error.
Bug: 254634348
Test: All unit tests pass.
Test: Ran debuggerd on native and java processes.
Test: Created a bugreport without error.
Change-Id: Ic531ccee05b9a470748b815cf109e0076150a0b6
Check for the log opening failing.
Add the ability to put error messages in the log and tombstone so
that it's clear if the log reading failed in some way.
Adjust test so that if there is a log or if no log exists, the test
will still pass.
Print an <unknown> if the command line is unreadable instead of nothing.
Test: Ran unit tests.
Test: Induced error and verified error message is save in tombstone.
Change-Id: I2fce8078573b40b9fed3cd453235f3824cadb5e3
Some testing environments can have a test that is sending many
thousands of messages to the log. When this type of process crashes
all of these log messages are captured and can cause OOM errors
while creating the tombstone.
Added a test to verify the log messages are truncated. Leaving this
test disabled for now since it is inherently flaky due to having to
assume that 500 messages are in the log.
Added a test for a newline in a log message since it's somewhat
related to this change.
NOTE: The total number of messages is capped at 500, but if a message
contains multiple newlines, the total messages will exceed 500.
Counting messages this way seems to be in the spirit of the cap,
that a process logging a large message with multiple newlines does
not completely fill the tombstone log data.
Bug: 269182937
Bug: 282661754
Test: All unit tests pass.
Test: The disabled max_log_messages test passes.
Change-Id: If18e62b29f899c2c4670101b402e37762bffbec6
Also add new unit tests to verify this behavior.
Bug: 276934420
Test: New unit tests pass.
Test: Ran new unit tests without pthread_setname_np call and verified
Test: the tests fail.
Test: Force crash logd and verify log messages are not gathered.
Test: Force crash a logd thread and verify log messages are not gathered.
Change-Id: If8effef68f629432923cdc89e57d28ef5b8b4ce2
This adds the missing assembler for riscv64, even though I don't have a
working tombstoned yet to test it with. There's a distinct possibility
we'll be back to fix the test (because although "register 1" is harmless
for the other architectures, it's the ra register on riscv64; the default
link register), but at least this lets us build the test.
I've also simplified all the assembly to be the simplest sequence I
know that writes 0 to address 0 (because if there was a reason to use
so many instructions before, I want to know what it is so I can write
the missing comment!).
Test: treehugger
Change-Id: I10d117eaedf361d9759a450e0973d07c4f97090e
1. Fixes this test under clang coverage, which is run under presubmit
for TEST_MAPPING files. When we spawn under a minijail, and the
process exited normally (which is the case for recoverable), clang
coverage would use atexit handlers to dump some stuff using banned
prctl's and other syscalls. Instead of allow-listing them all which
sounds like a huge pain, call _exit() which skips those handlers.
2. Extends the invariant testing to make sure that recoverable GWP-ASan
recovers both the first time, and a second time in a different slot.
Bug: N/A
Test: CLANG_COVERAGE=true NATIVE_COVERAGE_PATHS="*" atest debuggerd_test
Change-Id: I6059e21db4c2898b1c9777a00d2a54497d80ef79
Recoverable GWP-ASan is a mode landed upstream in
https://reviews.llvm.org/D140173. For more information about why/what it
is, see
https://android-review.git.corp.google.com/c/platform/bionic/+/2394588.
This patch makes debuggerd call the required libc callbacks for GWP-ASan
to recover from the memory corruption. It also adds the functionality
that libart/sigchain eventually ends up calling, which dumps a GWP-ASan
report for the first error encountered.
Test: Build the platform, run sanitizer-status in recoverable mode,
asserting that it doesn't crash but we get a debuggerd report.
Bug: 247012630
Change-Id: I27212f7250844c20a8fd1e961417cdb4e5bd3626
When moving to a proto tombstone, backtraces no longer contain
an offset when a frame is in a shared library from an apk.
Add the offset display again if needed, and add a test to
verify this behavior.
Bug: 267341682
Test: All unit tests pass.
Test: Dumped a process running through an apk to verify the offset
Test: is present.
Change-Id: Ib720ccb5bfcc8531d1e407f3d01817e8a0b9128c
The use of __builtin_abort in CrasherTest::Trap breaks with
-ftrap-function=abort, because then the argument of Trap is no longer in
the first argument register at the time of crash.
This flag is added when *any* sanitizer is enabled on the target, even harmless
ones like memtag-heap. See sanitize.go:769.
Fix CrasherTest::Trap to be a little more reliable.
Test: debuggerd_test with SANITIZE_TARGET=memtag_heap
Change-Id: I150f1c0355bd6f2bfabfa5a7bba125acdde1120e
Unify all our "noinline" variants to the current most common one, not
least because the new [[noinline]] syntax is fussier about where it goes.
Test: treehugger
Change-Id: Icfcb75c9d687f0f05c19f66ee778fd8962519436
In the fallback path, if the non-main thread is the target
to be dumped, then no other threads are dumped when creating
a tombstone. Fix this and add unit tests to verify that
this all threads, including the main thread are dumped.
Bug: 234058038
Test: All unit tests pass.
Test: debuggerd -b media.swcodec process
Test: debuggerd media.swcodec process
Change-Id: Ibb75264f7b3847acdbab939a66902d986c0d0e5c
If a process requires executing fallback unwinder and the thread
crashing is not the main thread, the wrong unwinder is used.
Fix this case, and add a new unit test that causes an abort in
the non main thread.
Bug: 233721755
Test: New unit test passes with fix and fails without.
Test: Ran debuggerd on swcodec process and it still dumps all threads.
Change-Id: I70fffc5d680256ce867e7a1d427593b584259160
Merged-In: I70fffc5d680256ce867e7a1d427593b584259160
(cherry picked from commit 2d5d46ca85)
With the addition of runtime-configurable GWP-ASan, there might be many,
many more than 1,000 allocations. Have support for them, but keep a
hopefully-won't-crash-the-device limit.
Bug: 219651032
Test: atest bionic-unit-tests
Change-Id: I7b8e2bf5ab7c723ab6c61365f0dc610e400dbbce
The functionality moved from the Unwinder object to the MapInfo
object and means that the individual unreadable files can be
displayed now.
Included adding the unreadable elfs per thread in the protobuf.
Updated the unwinder test.
Test: All unit tests pass.
Change-Id: I7140bde16938736da005f926e10bbdb3dbc0f6f5
When dumping a tombstone using the fallback path, only the main
thread was showing up. Modify the code to dump the threads using
a slightly different path for the tombstone generation code.
In addition, while looking at this code, two MTE variables were
not set in the tombstone fallback code. Added those variables
so MTE devices will work properly in this fallback path.
Modified the tombstone unit tests for seccomp to have
multiple threads and verify those threads show up in the tombstone.
Bug: 208933016
Test: Ran unit tests.
Test: Ran debuggerd <PID> on a privileged process and verified
Test: all threads dumped. Also verified that the tagged_addr_ctrl
Test: variable is present on the raven device.
Change-Id: I16eadb0cc2c37a7dbc5cac16af9b5051008b5127
Change use of new_ to old_ to save the old sigaction data. This hasn't
caused any issues, but it's obviously wrong.
Test: Ran unit tests on coral.
Change-Id: I96be5b0980c323c3aeafb422fbc06202577604a2
Hard to get otherwise if you're trying to debug PAC issues.
Bug: http://b/214314197
Test: treehugger
Change-Id: I2e5502809f84579bf287364e59d6e7ff67770919
It is expensive to keep the non-protobuf path around and it hasn't
been used for an entire release without anyone noticing, so remove it.
Create new end-to-end unit tests that cover tests of the non-proto
code paths that are being deleted.
Bug: 197981919
Test: Unit tests pass.
Change-Id: Ia1c45572300bd63e5f196ad61e5e5386830c8ece
- Use "likelihood" instead of "probability" since that has connotations
of being less precise, and our probability ordering isn't very precise
anyway.
- Hide the fault address with SEGV_MTEAERR because it is not available.
- Pad the fault address with leading zeroes to make it clearer which
bits of the top byte (and any following bytes such as PAC signature
bits) are set.
Bug: 206015287
Change-Id: I5e1e99b7f3e967c44781d8550bbd7158eb421b64
The libunwindstack code will attempt to dlopen the libdexfile.so
when a dex pc is found. Unfortunately, this failed since that
library was not properly listed as a runtime library. To make
sure this doesn't happen again, add an end to end test that
will create a dex pc frame, and will verify the correct
dex function name is in that frame.
Bug: 199043576
Test: Unit test passes on arm/aarch64/x86/x86_64.
Test: Removed the runtime_libs of libdexfile from libunwindstack
Test: and verified the new test fails.
Change-Id: I3a11f9ee44e06e37a547d193b04f7fbb90ccfe0a
When the switch was made to dump the tombstone from the protobuf,
the fault address marker in the maps section went missing. Re-add
that logic and add new unit tests to verify all of the different
behaviors.
Bug: 193935960
Test: All unit tests pass.
Test: All unit tests pass when setprop debug.debuggerd.translate_proto_to_text 0
Test: The above on cuttlefish, 32 bit and 64 bit.
Test: The above on a flame, 32 bit and 64 bit.
Change-Id: I098bb6ab4bacacae2ca0fc5ec9a73549ed0b9489
The tombstone will add a newline after the abort message, so remove
any trailing newlines before saving/printing.
Bug: 196414062
Test: Unit tests pass.
Test: Set system property debug.debuggerd.translate_proto_to_text to 0
test: and unit tests still pass.
Change-Id: I0d3dc215eb5d8be93d99e5b9d4f0a14b1d61396d
When running debuggerd from the command line, it's possible that
the signal will happen on a side thread. The original intercept
in tombstoned is set to only handle crashes from the main thread
pid, so in this case, the intercept doesn't occur. To fix this,
modify the code so that running debuggerd always sends the signal
to the main pid. In addition, modify the signal handler is entered
due to the BIONIC_SIGNAL_DEBUGGER signal, then the crashing tid is
set to the main thread pid instead of the current thread.
Add unit test to cover this case.
Bug: 194346289
Test: All unit tests pass.
Test: Verify the new unit test is getting the signal on the non-main
Test: thread and still properly handling the intercept.
Test: Modify the debuggerd code to send the signal to the non main pid
Test: and verify the dump still occurs correctly.
Change-Id: I2dd1bd11fc8ef4a6fe87f05ecc67ae349a101c82
This information clearly meets the bar for being dumped to logcat. If we
omit the info, we may confuse the user into thinking that it's not
available at all, especially if it's their first time seeing an MTE
report.
This also adds some functionality to the integration testing library to
pull logcat messages and scan them to make sure the contents are in both
places.
Bug: 187881237
Test: atest debuggerd_test # on QEMU w/ MTE.
Change-Id: Icc17ea45bda7628331cc4812eaad3bc5c949b7a7
