If top-level vbmeta struct is in 'boot' partition,
the "flags" element offset of top-level vbmeta header
from the beginning of boot partition is 123 plus
top-level vbmeta offset recorded in the boot image footer.
Bug: 139639521
Test: m fastboot
Test: fastboot --disable-verification flashall
Test: fastboot --disable-verification flash boot boot.img, checks the
flag isn't changed if the device has vbmeta partition
Test: fastboot --disable-verification flash vbmeta vbmeta.img
Change-Id: Ibf73c9330639e971ee3873ac19f072cf7baed55b
load_buf_fd() attempts to find the size of the file that it is about
to load by first calling sparse_file_import_auto() then using
sparse_file_len() upon success or falling back to the file size on the
filesystem on failure.
This is problematic however as sparse_file_import_auto() creates a
sparse_file out of the normal file, but does not resparse it, so an
assertion fails during the sparse_file_len() call.
This is fixed by using sparse_file_import() instead. This will fail
in the case that the file is not sparse and the call to
sparse_file_len() will be properly skipped.
Bug: 140538105
Test: flash blueline factory image with assertions enabled in
libsparse/sparse.cpp
Change-Id: I0283be33563a3301ce5b09bde41105a20f91086c
Skip importing COW group because they are dynamically
created by OTA clients and will never show up in built
images.
Test: flash
Change-Id: I44e7693cfb4c15e64455b56212a02f9abde88d61
Since these were combined into libhidlbase.
Bug: 135686713
Test: build only (libhwbinder/libhidltransport are empty)
Change-Id: I0bdffced6af52695c0ef98c9dd659348e56f7aa6
We must initialize UploadInner dsize value to 0, in case
stuck in ReadBuffer when receive DATA packet which dsize
is 0 or non DATA type packet. This will lead to fastboot
hang up unless USB unplugged.
Change-Id: I1e9752585c3d1013b1b1da38ead9ba4c532c2d34
Signed-off-by: qiwu chen <qiwuchen55@gmail.com>
originally if wants_wipe=true, program will erase and format partitions,
but after fb->Erase(), partition type should be raw(all 0xFFs),
then following fb_perform_format() will miss its original partition_type
Now we call fb_perform_format() with original fs type to keep the
partition consistent after wiping.
Change-Id: Ic778850588d5dd6fee23169d20c26bcbaa510627
When flashing or resizing partitions, remove the
LP_PARTITION_ATTR_UPDATED flag. This will cause first-stage init to skip
any snapshots for that partition, and the backing storage (if any)
will later be reclaimed.
Bug: 139155473
Test: manual test
Change-Id: I3b185f68dfecb5a93636af0b5ae289ead1363fd0
The vendor_boot partition has been created, so add it to the list of
images which may be flashed.
Bug: 137297791
Change-Id: I27eaa16656a83dbcb8289680844bf58dd1fccf24
Introduce a parameter struct to eliminate parameter explosion, and refactor
existing callers to use the new helper.
Test: manual test
Bug: 135752105
Change-Id: I0c5ebe4e084ad7503c2ac6c65886a71505d50d00
This is no longer needed as CreateLogicalPartition() ensures the
obtained path will not race with device deletion.
Bug: 135771280
Test: device builds, flashes
Change-Id: I821290aa08fede99d5c51cd68681c351a1ea97bc
Update adb, fastboot and mount point
Bug: 134359158
Test: build and check if system_ext.img can be flashed
Change-Id: I6219f72242c5fe42a508008c0b1fd218d74da5b6
Usage: fastboot wipe-super [super_empty.img]
This command will read the given super_empty.img (using the default one
in ANDROID_PRODUCT_OUT if not specified), and flash by generating a
temporary super.img with no partition data. This command will even work
on retrofit devices.
This command is intended to be used either during device bringup or with
scripts that will manually flash individual dynamic partitions, in place
of using "fastboot flashall".
Bug: 136282057
Test: fastboot wipe-super on retrofit and non-retrofit device
Change-Id: Icab368a63ff36fcce9ac9304eb3966dd38bd78c4
These tend to get manually, so let's promote to actual helpers.
Bug: 134536978
Test: liblp_test gtest
Change-Id: Ifb79c8d6f247cc3f9635bf6adfd1c99907340002
We recently changed 'xfer' to a size_t, so update the DBG format
accordingly. We also fix a long standing issue with format for
the unsigned 'read'.
Test: TreeHugger
Change-Id: I3dc5f26a033fea64119016802bc9cdb54bbb7b52
Read function exits before reading all requested bytes. Fix that by
looping until the len requested is completed.
This will fix the issue execting get_staged command for a staged image
bigger than 1MB
Test: fastboot get_staged file.txt
Change-Id: Ic70ab48f3a8c8d78c225db638892501d4dc20b13
Signed-off-by: Fernando Lugo <flugo@google.com>
non-aio USB read function was stuck in a loop waiting for more data
because data length parameter is always set 64 for fastbootd commands.
It should be a normal case to get less data than expected
since lengths of these commands are usually less than 64.
Add logic to check this and one more parameter to distinguish
fastbootd from general adbd case.
Bug: 133189029
Test: try various fastbootd commands
Change-Id: I6690324840d78f3f1e04235040301520329976db
Merged-In: I6690324840d78f3f1e04235040301520329976db
Currently, during a 'fastboot flashall/fastboot update', the 'getvar
max-download-size' command is issued once to the device when it is in
bootloader mode and the same value is used even after the device boots
into fastbootd. If the max-download-size returned by bootloader is
greater than the max-download-size in fastbootd, this could break flash
as large images are broken down into chunks before downloading by using
the max-download-size variable. This will cause fastbootd to return
an error since it checks whether the buffer being downloaded has a size
greater than the max-download-size limit.
Test: fastboot flashall
Bug: 536870912
Change-Id: Ife7c1ec0583d80d4a31ecf01f1fc14a8365afe0d
We can't create interface iterators for all devices (e.g. the keyboard,
touchbar, etc.), so we get multiple instances of this log spam on every
command.
Demote it to a warning that only shows up on debug builds.
Test: none
Change-Id: I20581b9134c05360d5723b09ffe8de8c4cfd6a3f
Switch FindEntry and the ZipString constructor to std::string_view. This
lets us accept an over-long name so that we can reject it as too long.
Also fastboot changes to track the API change.
Bug: http://b/129068177
Test: treehugger
Change-Id: I7df7acd1fe2c46380b789c25f8909e0553e2d55e
Currently if the device is unplugged from host,
there is a lot of log spamming since fastbootd
does not not recognize that the device has been
disconnected and keeps trying to read/write to the
device.
2856 printk messages dropped ** [ 169.941904] c7 579 fastbootd: aio: got error event on
read total bufs 1: No such devie
** 2960 printk messages dropped ** [ 169.953328] c7 579 fastbootd: Fastboot command:
** 2074 printk messages dropped ** [ 169.961355] c7 579 fastbootd: aio: got error event
on read total bufs 1: No such devie
Bug: 121333158
Test: unplug device and check for log spam multiple times
Change-Id: I1d4c6f48f34e313c5ebce23d62a4fe6a6373f94f
Vendor must be a logical partition and boot must not be a logical
partition.
Test: fuzzy_fastboot --gtest_filter=*Logical*
Bug: 117220134
Change-Id: Ifc6f2f715ca92cd1fe779e8fce2d6a10a1f140b9
This is required for read() to function correctly
in Windows since it behaves differently in text mode and
binary mode and may cause unpredictable behavior depending
on the contents of the image file.
Bug: 129281908
Test: fastboot.exe flashall
Change-Id: I64370af44a050bafea60ff1b0b2be18cc531480a
The function do_for_partitions() takes a const std::string
reference, so it's inefficient to pass a std::string::c_str().
Test: TreeHugger
Change-Id: Ia84ed9ec691ee2f524c61dd25a81b2995bb0bb33
As part of a refactor, commit db511207ed
added a timeout for receving responses for commands. Unfortunately,
the timeout is optimistic as to how quickly target devices can complete
such operations. Flash and erase commands can be quite slow on devices
with traditional flash chips. The fastboot protocol is already adept
at handling such cases because it allows for sending INFO packets during
these periods. We may receive one or more INFO packets during tehse long
operations. Every time we receive an INFO packet, it proves the remote
end is alive, but busy, which should reset our timeout timer.
Change-Id: Ia3bba21c497b22639b626d89711ecd4eb02504ed
Signed-off-by: Dima Zavin <dmitriyz@waymo.com>
Previously, system_clock was used for remote command timeouts
which can get disturbed by NTP adjustments (jumps).
Change-Id: I0ffc159bf34d12e8d3713044524114d60a6a45ca
Signed-off-by: Dima Zavin <dmitriyz@waymo.com>
This command erroneously reports that no GSI is installed, because
/metadata is not mounted in recovery. To address this, temporarily mount
/metadata when the gsi command is invoked.
Bug: 122556707
Test: fastboot gsi disable
fastboot gsi wipe
Change-Id: Ib21971b49b46fd580b902ff75f01cfb96192afc0
And deprecate one more old style function that is not used after this
change.
Test: boot, disable and enable verity
Change-Id: Id509f479850120352b4ea4dc3b6c40f6e8e2e53e
New arguments 'dtb' and 'dtb-offset' have been added to
support boot image header version 2 for the 'fastboot boot'
and 'fastboot flash:raw boot' commands.
Test: fastboot boot Image.lz4 --dtb <dtb_path> --header-version 2
Test: fastboot flash:raw boot Image.lz4 --dtb <dtb_path>
--header-version 2
Bug: 111136242
Change-Id: Idf5c2eb138609dc7e915e80c4db64677c89f24b6
Note: this only removes the bootable marker, since we're unable to
remove the userdata files within recovery.
Bug: 121210348
Test: fastboot gsi wipe
fastboot gsi disable
Change-Id: I64fe848c787d426ae9d18a1557a9d6b340bfc2cf
