When merging in recovery, the "imminent data wipe" code was used, which
made the assumption the /metadata and /data state would be zapped. This
caused future OTAs to error because the old snapshots were detected.
This CL allows OTAs to proceed even if unexpected snapshots are present.
It also forces the state to "MergeCompleted" after a merge in recovery,
so that the next normal boot can perform cleanup.
Bug: 155339165
Test: fastboot snapshot-update merge, then take another OTA
vts_libsnapshot_test
Change-Id: Ief6dea3ba76323044e61307272dda320a4494aea
Merged-In: Ief6dea3ba76323044e61307272dda320a4494aea
1. delete-logical-partition was deleted
- After merge "Don't require bootloader fastboot for VTS compliance." commit, delete-logical-partition sequence was deleted in LogicalPartitionCompliance test. "create-logical-partition failed" is occurred when run vts fastbootverification module. So restore this sequence.
Test: run vts -m VtsFastbootVerification
Bug: 153913610
Signed-off-by: Yongcheol LEE <yongcheol09.lee@lge.com>
Change-Id: I00366b281eafa5677b0941419a86f2702fb3484b
Merged-In: I00366b281eafa5677b0941419a86f2702fb3484b
Bug: 151896491
Test: presubmit check
Exempt-From-Owner-Approval: This CL renames suite name vts-core to vts.
It won't change test logic or behavior.
Change-Id: I24779951257ce37fc18929f214d3cf5f76c23a19
This code path is effectively dead in adbd, and fastboot's dependency on
libadbd makes it hard to refactor adbd's dependencies.
Bug: http://b/150317254
Test: built and flashed aosp_walleye-eng
Change-Id: I5118136d32fdcbbd011559ed0a4a71e1dc7bf064
Merged-In: I5118136d32fdcbbd011559ed0a4a71e1dc7bf064
(cherry picked from commit 0871824de6)
Support v3 header format when changing the command line with
fastboot boot or using flash:raw.
Bug: 151750405
Test: fastboot boot and flash:raw with updated cmdline and v3 header
Merged-In: Ibf396e2d18d8b22cad50db290f3fd4e46ff85d9b
Change-Id: Ibf396e2d18d8b22cad50db290f3fd4e46ff85d9b
Using FastbootDevice::GetCurrentSlot to get the current slot suffix
instead of reading the same from the device's boot control HAL
is required to account for the prior set_active commands issued via
fastbootd in the same boot.
Test: fuzzy_fastboot
--gtest_filter=Conformance.Slots:Conformance.SetActive --gtest_repeat=10
Bug: 146589281
Change-Id: I2edb0f024d93c2483659623423ef5c69c717c7af
Merged-In: I2edb0f024d93c2483659623423ef5c69c717c7af
Some output of `fastboot getvar` exceeds current message size.
Increases the message size to 256 to fix the issue.
Bug: 74445765
Bug: 144473561
Test: fastboot getvar system-fingerprint
Change-Id: Id5064be4bb500697ce87c473f662d86c7c344d65
Exporting more properties that can be useful for image compatibility
check, prior to run fastboot flash.
Bug: 74445765
Bug: 144473561
Test: fastboot getvar <new variable>
Change-Id: I2ddfa2c1e9e719e05a3a64b9ca1d608957aebf11
This is for the test to run without packaging libc++.so in vts-core
suite.
Bug: 147249791
Test: atest FastbootVerifyUserspaceTest
Change-Id: I0263d13a2dd08186502b30b2fad25d4f0f3a6be8
The binary is required by FastbootVerifyUserspaceTest.
Disable test config generation as fuzzy_fasboot itself is not part of
vts-core suite.
Bug: 147249791
Test: atest FastbootVerifyUserspaceTest
Change-Id: Ief86f33b41990a354497b128e154da04fec58ae9
fs_mgr_overlayfs needs access to /metadata to tell whether or not the
scratch partition exists on /data.
Bug: 134949511
Test: adb remount, fastboot flash system
Change-Id: I3a09aae495d691e9c1a1e25a8fb3514e355ecd05
CPU ABI info, e.g., arm64-v8a, can be useful to determine image
compatibility, prior to flash. Adding this info in fastbootd.
Bug: 74445765
Test: fastboot getvar cpu-abi # arm64-v8a
Change-Id: Ied494b646c551320295956b7890c0102fdb88382
When a snapshot is applied or is merging, requests to erase or flash
userdata, metadata, or misc must be protected. In addition, the
set_active command must be restricted when a merge is in progress.
In addition, introduce a "snapshot-update merge" command for assisting
with erase requests when a merge is in progress. As in recovery, this
will force a merge to complete.
Bug: 139154945
Test: apply update
fastboot erase userdata
fastboot erase metadata
fastboot erase misc
fastboot set_active
Change-Id: I152446464335c62c39ffb4cc6366be9de19eac30
This introduces two new commands to the fastboot protocol:
- getvar snapshot-update-status - Return "none", "snapshotted", or
"merging" depending on the current status set by the boot control
HAL.
- snapshot-update [cancel] - Cancel any pending snapshot-based updates
via the boot control HAL. After this, the HAL should return
MergeStatus::CANCELLED and "update-merge-status" should be "none".
If no argument is specified, the snapshot-update-status is returned
via an INFO response.
Bootloaders are expected to implement this in a manner consistent with
the boot control HAL.
Fastboot-based tooling should expect wipes of userdata to fail when
update-merge-status returns "merging". Thus, the force flag now cancel
any pending snapshots.
Bug: 139154945
Test: fastboot getvar snapshot-update-status
fastboot snapshot-update cancel
fastboot snapshot-update
Change-Id: Idc423fe7656b212e929e64eb0e6b85b453e0e8dc
If top-level vbmeta struct is in 'boot' partition,
the "flags" element offset of top-level vbmeta header
from the beginning of boot partition is 123 plus
top-level vbmeta offset recorded in the boot image footer.
Bug: 139639521
Test: m fastboot
Test: fastboot --disable-verification flashall
Test: fastboot --disable-verification flash boot boot.img, checks the
flag isn't changed if the device has vbmeta partition
Test: fastboot --disable-verification flash vbmeta vbmeta.img
Change-Id: Ibf73c9330639e971ee3873ac19f072cf7baed55b
load_buf_fd() attempts to find the size of the file that it is about
to load by first calling sparse_file_import_auto() then using
sparse_file_len() upon success or falling back to the file size on the
filesystem on failure.
This is problematic however as sparse_file_import_auto() creates a
sparse_file out of the normal file, but does not resparse it, so an
assertion fails during the sparse_file_len() call.
This is fixed by using sparse_file_import() instead. This will fail
in the case that the file is not sparse and the call to
sparse_file_len() will be properly skipped.
Bug: 140538105
Test: flash blueline factory image with assertions enabled in
libsparse/sparse.cpp
Change-Id: I0283be33563a3301ce5b09bde41105a20f91086c
Skip importing COW group because they are dynamically
created by OTA clients and will never show up in built
images.
Test: flash
Change-Id: I44e7693cfb4c15e64455b56212a02f9abde88d61
Since these were combined into libhidlbase.
Bug: 135686713
Test: build only (libhwbinder/libhidltransport are empty)
Change-Id: I0bdffced6af52695c0ef98c9dd659348e56f7aa6
We must initialize UploadInner dsize value to 0, in case
stuck in ReadBuffer when receive DATA packet which dsize
is 0 or non DATA type packet. This will lead to fastboot
hang up unless USB unplugged.
Change-Id: I1e9752585c3d1013b1b1da38ead9ba4c532c2d34
Signed-off-by: qiwu chen <qiwuchen55@gmail.com>
originally if wants_wipe=true, program will erase and format partitions,
but after fb->Erase(), partition type should be raw(all 0xFFs),
then following fb_perform_format() will miss its original partition_type
Now we call fb_perform_format() with original fs type to keep the
partition consistent after wiping.
Change-Id: Ic778850588d5dd6fee23169d20c26bcbaa510627
When flashing or resizing partitions, remove the
LP_PARTITION_ATTR_UPDATED flag. This will cause first-stage init to skip
any snapshots for that partition, and the backing storage (if any)
will later be reclaimed.
Bug: 139155473
Test: manual test
Change-Id: I3b185f68dfecb5a93636af0b5ae289ead1363fd0
The vendor_boot partition has been created, so add it to the list of
images which may be flashed.
Bug: 137297791
Change-Id: I27eaa16656a83dbcb8289680844bf58dd1fccf24
Introduce a parameter struct to eliminate parameter explosion, and refactor
existing callers to use the new helper.
Test: manual test
Bug: 135752105
Change-Id: I0c5ebe4e084ad7503c2ac6c65886a71505d50d00
This is no longer needed as CreateLogicalPartition() ensures the
obtained path will not race with device deletion.
Bug: 135771280
Test: device builds, flashes
Change-Id: I821290aa08fede99d5c51cd68681c351a1ea97bc
Update adb, fastboot and mount point
Bug: 134359158
Test: build and check if system_ext.img can be flashed
Change-Id: I6219f72242c5fe42a508008c0b1fd218d74da5b6
Usage: fastboot wipe-super [super_empty.img]
This command will read the given super_empty.img (using the default one
in ANDROID_PRODUCT_OUT if not specified), and flash by generating a
temporary super.img with no partition data. This command will even work
on retrofit devices.
This command is intended to be used either during device bringup or with
scripts that will manually flash individual dynamic partitions, in place
of using "fastboot flashall".
Bug: 136282057
Test: fastboot wipe-super on retrofit and non-retrofit device
Change-Id: Icab368a63ff36fcce9ac9304eb3966dd38bd78c4
These tend to get manually, so let's promote to actual helpers.
Bug: 134536978
Test: liblp_test gtest
Change-Id: Ifb79c8d6f247cc3f9635bf6adfd1c99907340002
We recently changed 'xfer' to a size_t, so update the DBG format
accordingly. We also fix a long standing issue with format for
the unsigned 'read'.
Test: TreeHugger
Change-Id: I3dc5f26a033fea64119016802bc9cdb54bbb7b52
Read function exits before reading all requested bytes. Fix that by
looping until the len requested is completed.
This will fix the issue execting get_staged command for a staged image
bigger than 1MB
Test: fastboot get_staged file.txt
Change-Id: Ic70ab48f3a8c8d78c225db638892501d4dc20b13
Signed-off-by: Fernando Lugo <flugo@google.com>
non-aio USB read function was stuck in a loop waiting for more data
because data length parameter is always set 64 for fastbootd commands.
It should be a normal case to get less data than expected
since lengths of these commands are usually less than 64.
Add logic to check this and one more parameter to distinguish
fastbootd from general adbd case.
Bug: 133189029
Test: try various fastbootd commands
Change-Id: I6690324840d78f3f1e04235040301520329976db
Merged-In: I6690324840d78f3f1e04235040301520329976db
Currently, during a 'fastboot flashall/fastboot update', the 'getvar
max-download-size' command is issued once to the device when it is in
bootloader mode and the same value is used even after the device boots
into fastbootd. If the max-download-size returned by bootloader is
greater than the max-download-size in fastbootd, this could break flash
as large images are broken down into chunks before downloading by using
the max-download-size variable. This will cause fastbootd to return
an error since it checks whether the buffer being downloaded has a size
greater than the max-download-size limit.
Test: fastboot flashall
Bug: 536870912
Change-Id: Ife7c1ec0583d80d4a31ecf01f1fc14a8365afe0d
