- Use "likelihood" instead of "probability" since that has connotations
of being less precise, and our probability ordering isn't very precise
anyway.
- Hide the fault address with SEGV_MTEAERR because it is not available.
- Pad the fault address with leading zeroes to make it clearer which
bits of the top byte (and any following bytes such as PAC signature
bits) are set.
Bug: 206015287
Change-Id: I5e1e99b7f3e967c44781d8550bbd7158eb421b64
On the main thread, the siginfo pointer will never be nullptr.
Add a CHECK to make sure this is true.
Test: Unit tests pass both 32 bit and 64 bit.
Test: Ran with debug.debuggerd.translate_proto_to_text set to 0
Test: to exercise old path.
Change-Id: I9d5ed0de5d652de8a4f9cd85eb57cbb1ec676404
This code was added, but a svelte config still tries to use scudo
related code that doesn't exist.
Bug: 201007100
Test: Ran unit tests on normal config.
Test: Ran unit tests on svelte config.
Change-Id: Ic84bae37717d213121aef182bac2f82dbee25213
strerror is nice, but usually I don't care about the text, I care about
the uppercase enum
Bug: N/A
Test: N/A
Change-Id: I8ea86220cb04cbded701379c47b8aba8ea8864b8
I was here because we have a case where timeout(1) kills logcat, but
debuggerd alleges that the process that was killed had started less than
a second ago. I'm not sure this is the problem there, but I did notice
that far too many tombstones were claiming improbably short process
uptimes. It turns out that the code was measuring the *thread* uptime,
not the *process* uptime.
Also simplify the code a bit by switching to sysinfo(2) rather than
reading a file.
Test: manual, plus the existing unit test
Change-Id: Ie2810b1d5777ad9182be92bfb3f60795dc978b24
When the switch was made to dump the tombstone from the protobuf,
the fault address marker in the maps section went missing. Re-add
that logic and add new unit tests to verify all of the different
behaviors.
Bug: 193935960
Test: All unit tests pass.
Test: All unit tests pass when setprop debug.debuggerd.translate_proto_to_text 0
Test: The above on cuttlefish, 32 bit and 64 bit.
Test: The above on a flame, 32 bit and 64 bit.
Change-Id: I098bb6ab4bacacae2ca0fc5ec9a73549ed0b9489
The tombstone will add a newline after the abort message, so remove
any trailing newlines before saving/printing.
Bug: 196414062
Test: Unit tests pass.
Test: Set system property debug.debuggerd.translate_proto_to_text to 0
test: and unit tests still pass.
Change-Id: I0d3dc215eb5d8be93d99e5b9d4f0a14b1d61396d
For the new kernel 5.13 heders, there is a new TRAP_PERF value that
needs to be handled.
Test: Builds.
Change-Id: I2c6658ca94423c210db9ad6692ec69f6be69b3f5
Using thread cache will cause SIGSEGV for 32bit+kernel4.9 device.
Bug: 190579082
Bug: 189803009
Test: run cts -m CtsSeccompHostTestCases
Change-Id: I47b13d02674aadbacd8dac36d8382eed0885413c
Signed-off-by: yidong zhang <yidong.zhang@amlogic.com>
This information clearly meets the bar for being dumped to logcat. If we
omit the info, we may confuse the user into thinking that it's not
available at all, especially if it's their first time seeing an MTE
report.
This also adds some functionality to the integration testing library to
pull logcat messages and scan them to make sure the contents are in both
places.
Bug: 187881237
Test: atest debuggerd_test # on QEMU w/ MTE.
Change-Id: Icc17ea45bda7628331cc4812eaad3bc5c949b7a7
When moving to the proto-ized tombstones, the note about unreadable
elf files in a backtrace got lost. This re-adds it and adds a test
to verify that the note properly shows up.
Bug: 185428454
Test: Ran unit tests.
Change-Id: I1150cc737772e1b79fd73ec5c782caadc4629421
Proto tombstones were missing tagged fault addresses, tagged_addr_ctrl,
tags in memory dumps and Scudo and GWP-ASan error reports. Since text
tombstones now go via protos, all of these features broke when we
switched to text tombstones generated from protos by default. Fix
the features by adding support for them to the proto format,
tombstone_proto and tombstone_proto_to_text.
Bug: 135772972
Bug: 182489365
Change-Id: I3ca854546c38755b1f6410a1f6198a44d25ed1c5
Looks like we unintentionally had a breakage after aosp/1595302, where
both GWP-ASan and MTE tests started failing because the extra
information wasn't plumbed through the tombstones. MTE has end-to-end
tests but aren't run continuously, and GWP-ASan was missing the e2e
tests.
Also remove some unique wording for GWP-ASan, a UaF on the free'd
pointer is now "0 bytes into a 16-byte allocation" instead of "on a
16-byte allocation". The former is more descriptive and is more
ubiquitously used in our tooling.
This patch adds the E2E tests, but the underlying problem needs to be
fixed as well, before this patch can land.
Bug: 182489365
Test: atest debuggerd_test
Change-Id: I0fe8aba7ea443b3071724987f46b19a6525cda3c
Application developers would like to know how long their process has
been alive for to distinguish between crashes that happen immediately
upon startup and crashes in regular operation.
Test: manual
Change-Id: Ia31eeadfcced358b478c7a7c7bb2e8a0252e30f4
We're running into timeouts from death tests because we're ~doubling the
cost of crash dumping by doing it twice.
Bug: http://b/180605583
Test: treehugger
Change-Id: If5b40434171323a09960b70af0124ec08bd3fbe8
With this change we can report memory errors involving secondary
allocations. Update the existing crasher tests to also test
UAF/overflow/underflow on allocations with sizes sufficient to trigger
the secondary allocator.
Bug: 135772972
Change-Id: Ic8925c1f18621a8f272e26d5630e5d11d6d34d38
Otherwise we can fail to find map entries for tagged addresses,
such as those of heap objects.
Bug: 135772972
Change-Id: Ia626b0587c8461eb575b2de5c08562c73ba4a66e
libbase logging uses getprogname() to get the default tag, which breaks
for the fallback handler which is statically linked into the dynamic
linker. Switch to libasync_safe for logging.
Test: atest -c CtsSeccompHostTestCases:android.seccomp.cts.SeccompHostJUnit4DeviceTest#testAppZygoteSyscalls
Change-Id: Ieeaf33fb26cff4ba7e1589d1d883ac2fcc74cf47
Revert "Let crash_dump read /proc/$PID."
Revert submission 1556807-tombstone_proto
Reason for revert: b/178455196, Broken test: android.seccomp.cts.SeccompHostJUnit4DeviceTest#testAppZygoteSyscalls on git_master on cf_x86_64_phone-userdebug
Reverted Changes:
Ide6811297:tombstoned: switch from goto to RAII.
I8d285c4b4:tombstoned: make it easier to add more types of ou...
Id0f0fa285:tombstoned: support for protobuf fds.
I6be6082ab:Let crash_dump read /proc/$PID.
Id812ca390:Make protobuf vendor_ramdisk_available.
Ieeece6e6d:libdebuggerd: add protobuf implementation.
Change-Id: Ia0a1ee57e7630e01c495dc166218f665340aad7f
This reverts commit 675cb30f05.
Reason for revert: b/178455196, Broken test: android.seccomp.cts.SeccompHostJUnit4DeviceTest#testAppZygoteSyscalls on git_master on cf_x86_64_phone-userdebug
Change-Id: I82d228f2bc3e6b426d4703732e1c8766815ccc97
* changes:
libdebuggerd: add protobuf implementation.
tombstoned: support for protobuf fds.
tombstoned: make it easier to add more types of outputs.
tombstoned: switch from goto to RAII.
Currently, all MTE failures end up displaying 'Fault address falls at
0x<addr> after any mapped regions'. Clearly when scanning, we should use
the untagged address to figure out which ranges it's in.
I've taken the liberty of removing all si_addr parsing and moving it
into the common ProcessInfo, as well as making it really explicit
whether you want the (possibly tagged) original si_addr, or whether you
want the untagged variant (for scanning /proc/maps or whatever).
This is not particularly easily testable, as ReadCrashInfo isn't easily
injectable and `dump_all_maps` should already be passed the untagged
pointer to scan for. I've tested this locally on FVP under SYNC MTE with
a simple UaF binary and noted the problem is fixed. Given that this is
making the code more clear, I'm hoping the owners see no need for a
regression test :).
Bug: 135772972
Test: On FVP, run 'adb shell MEMTAG_OPTIONS=sync sanitizer-status' and
check that the use-after-free test ends up with the /proc/maps
desription in the right place.
Change-Id: I220e4200c75a72474a95a67e5bbc36173a438dd2
This commit implements protobuf output for tombstones, along with a
translator that should emit bytewise identical output to the existing
tombstone dumping code, except for ancillary data from GWP-ASan and
Scudo, which haven't been implemented yet.
Test: setprop debug.debuggerd.translate.translate_proto_to_text 1 &&
/data/nativetest64/debuggerd_test/debuggerd_test
Test: for TOMBSTONE in /data/tombstones/tombstone_??; do
pbtombstone $TOMBSTONE.pb | diff $TOMBSTONE -
done
Change-Id: Ieeece6e6d1c26eb608b00ec24e2e725e161c8c92
Now that the feature guarded by this flag has landed in Linux 5.10
we no longer need the flag, so we can remove it.
Bug: 135772972
Change-Id: I02fa50848cbd0486c23c8a229bb8f1ab5dd5a56f
