tequilaOS/platform_system_core
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
platform_system_core/init/init.cpp
Tom Cherry 30a6f276fd init: clean up the SectionParser interface and Parser class 
Remove the dependency on Action and Service from what should be a
generic Parser class.

Make ActionParser, ImportParser, and ServiceParser take a pointer to
their associated classes instead of accessing them through a
singleton.

Misc fixes to SectionParser Interface:
1) Make SectionParser::ParseLineSection() non-const as it always should
have been.
2) Use Rvalue references where appropriate
3) Remove extra std::string& filename in SectionParser::EndFile()
4) Only have SectionParser::ParseSection() as pure virtual

Document SectionParser.

Make ImportParser report the filename and line number of failed imports.

Make ServiceParser report the filename and line number of duplicated services.

Test: Boot bullhead

Change-Id: I86568a5b375fb4f27f4cb235ed1e37635f01d630
2017-04-21 18:26:40 -07:00

1491 lines
51 KiB
C++
Raw Blame History

/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "init.h"
#include <ctype.h>
#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
#include <inttypes.h>
#include <libgen.h>
#include <paths.h>
#include <signal.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/epoll.h>
#include <sys/mount.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <sys/types.h>
#include <sys/un.h>
#include <sys/wait.h>
#include <unistd.h>
#include <selinux/selinux.h>
#include <selinux/label.h>
#include <selinux/android.h>
#include <android-base/chrono_utils.h>
#include <android-base/file.h>
#include <android-base/logging.h>
#include <android-base/properties.h>
#include <android-base/stringprintf.h>
#include <android-base/strings.h>
#include <android-base/unique_fd.h>
#include <libavb/libavb.h>
#include <private/android_filesystem_config.h>
#include <fstream>
#include <memory>
#include <set>
#include <vector>
#include "action.h"
#include "bootchart.h"
#include "devices.h"
#include "fs_mgr.h"
#include "fs_mgr_avb.h"
#include "import_parser.h"
#include "init_parser.h"
#include "keychords.h"
#include "log.h"
#include "property_service.h"
#include "reboot.h"
#include "service.h"
#include "signal_handler.h"
#include "ueventd.h"
#include "util.h"
#include "watchdogd.h"
using android::base::boot_clock;
using android::base::GetProperty;
using android::base::StringPrintf;
struct selabel_handle *sehandle;
struct selabel_handle *sehandle_prop;
static int property_triggers_enabled = 0;
static char qemu[32];
std::string default_console = "/dev/console";
static time_t process_needs_restart_at;
const char *ENV[32];
static int epoll_fd = -1;
static std::unique_ptr<Timer> waiting_for_prop(nullptr);
static std::string wait_prop_name;
static std::string wait_prop_value;
void DumpState() {
ServiceManager::GetInstance().DumpState();
ActionManager::GetInstance().DumpState();
}
void register_epoll_handler(int fd, void (*fn)()) {
epoll_event ev;
ev.events = EPOLLIN;
ev.data.ptr = reinterpret_cast<void*>(fn);
if (epoll_ctl(epoll_fd, EPOLL_CTL_ADD, fd, &ev) == -1) {
PLOG(ERROR) << "epoll_ctl failed";
}
}
/* add_environment - add "key=value" to the current environment */
int add_environment(const char *key, const char *val)
{
size_t n;
size_t key_len = strlen(key);
/* The last environment entry is reserved to terminate the list */
for (n = 0; n < (arraysize(ENV) - 1); n++) {
/* Delete any existing entry for this key */
if (ENV[n] != NULL) {
size_t entry_key_len = strcspn(ENV[n], "=");
if ((entry_key_len == key_len) && (strncmp(ENV[n], key, entry_key_len) == 0)) {
free((char*)ENV[n]);
ENV[n] = NULL;
}
}
/* Add entry if a free slot is available */
if (ENV[n] == NULL) {
char* entry;
asprintf(&entry, "%s=%s", key, val);
ENV[n] = entry;
return 0;
}
}
LOG(ERROR) << "No env. room to store: '" << key << "':'" << val << "'";
return -1;
}
bool start_waiting_for_property(const char *name, const char *value)
{
if (waiting_for_prop) {
return false;
}
if (GetProperty(name, "") != value) {
// Current property value is not equal to expected value
wait_prop_name = name;
wait_prop_value = value;
waiting_for_prop.reset(new Timer());
} else {
LOG(INFO) << "start_waiting_for_property(\""
<< name << "\", \"" << value << "\"): already set";
}
return true;
}
void property_changed(const std::string& name, const std::string& value) {
// If the property is sys.powerctl, we bypass the event queue and immediately handle it.
// This is to ensure that init will always and immediately shutdown/reboot, regardless of
// if there are other pending events to process or if init is waiting on an exec service or
// waiting on a property.
if (name == "sys.powerctl") HandlePowerctlMessage(value);
if (property_triggers_enabled)
ActionManager::GetInstance().QueuePropertyTrigger(name, value);
if (waiting_for_prop) {
if (wait_prop_name == name && wait_prop_value == value) {
wait_prop_name.clear();
wait_prop_value.clear();
LOG(INFO) << "Wait for property took " << *waiting_for_prop;
waiting_for_prop.reset();
}
}
}
static void restart_processes()
{
process_needs_restart_at = 0;
ServiceManager::GetInstance().ForEachServiceWithFlags(SVC_RESTARTING, [](Service* s) {
s->RestartIfNeeded(&process_needs_restart_at);
});
}
void handle_control_message(const std::string& msg, const std::string& name) {
Service* svc = ServiceManager::GetInstance().FindServiceByName(name);
if (svc == nullptr) {
LOG(ERROR) << "no such service '" << name << "'";
return;
}
if (msg == "start") {
svc->Start();
} else if (msg == "stop") {
svc->Stop();
} else if (msg == "restart") {
svc->Restart();
} else {
LOG(ERROR) << "unknown control msg '" << msg << "'";
}
}
static int wait_for_coldboot_done_action(const std::vector<std::string>& args) {
Timer t;
LOG(VERBOSE) << "Waiting for " COLDBOOT_DONE "...";
// Historically we had a 1s timeout here because we weren't otherwise
// tracking boot time, and many OEMs made their sepolicy regular
// expressions too expensive (http://b/19899875).
// Now we're tracking boot time, just log the time taken to a system
// property. We still panic if it takes more than a minute though,
// because any build that slow isn't likely to boot at all, and we'd
// rather any test lab devices fail back to the bootloader.
if (wait_for_file(COLDBOOT_DONE, 60s) < 0) {
LOG(ERROR) << "Timed out waiting for " COLDBOOT_DONE;
panic();
}
property_set("ro.boottime.init.cold_boot_wait", std::to_string(t.duration_ms()).c_str());
return 0;
}
/*
* Writes 512 bytes of output from Hardware RNG (/dev/hw_random, backed
* by Linux kernel's hw_random framework) into Linux RNG's via /dev/urandom.
* Does nothing if Hardware RNG is not present.
*
* Since we don't yet trust the quality of Hardware RNG, these bytes are not
* mixed into the primary pool of Linux RNG and the entropy estimate is left
* unmodified.
*
* If the HW RNG device /dev/hw_random is present, we require that at least
* 512 bytes read from it are written into Linux RNG. QA is expected to catch
* devices/configurations where these I/O operations are blocking for a long
* time. We do not reboot or halt on failures, as this is a best-effort
* attempt.
*/
static int mix_hwrng_into_linux_rng_action(const std::vector<std::string>& args)
{
int result = -1;
int hwrandom_fd = -1;
int urandom_fd = -1;
char buf[512];
ssize_t chunk_size;
size_t total_bytes_written = 0;
hwrandom_fd = TEMP_FAILURE_RETRY(
open("/dev/hw_random", O_RDONLY | O_NOFOLLOW | O_CLOEXEC));
if (hwrandom_fd == -1) {
if (errno == ENOENT) {
LOG(ERROR) << "/dev/hw_random not found";
// It's not an error to not have a Hardware RNG.
result = 0;
} else {
PLOG(ERROR) << "Failed to open /dev/hw_random";
}
goto ret;
}
urandom_fd = TEMP_FAILURE_RETRY(
open("/dev/urandom", O_WRONLY | O_NOFOLLOW | O_CLOEXEC));
if (urandom_fd == -1) {
PLOG(ERROR) << "Failed to open /dev/urandom";
goto ret;
}
while (total_bytes_written < sizeof(buf)) {
chunk_size = TEMP_FAILURE_RETRY(
read(hwrandom_fd, buf, sizeof(buf) - total_bytes_written));
if (chunk_size == -1) {
PLOG(ERROR) << "Failed to read from /dev/hw_random";
goto ret;
} else if (chunk_size == 0) {
LOG(ERROR) << "Failed to read from /dev/hw_random: EOF";
goto ret;
}
chunk_size = TEMP_FAILURE_RETRY(write(urandom_fd, buf, chunk_size));
if (chunk_size == -1) {
PLOG(ERROR) << "Failed to write to /dev/urandom";
goto ret;
}
total_bytes_written += chunk_size;
}
LOG(INFO) << "Mixed " << total_bytes_written << " bytes from /dev/hw_random into /dev/urandom";
result = 0;
ret:
if (hwrandom_fd != -1) {
close(hwrandom_fd);
}
if (urandom_fd != -1) {
close(urandom_fd);
}
return result;
}
static void security_failure() {
LOG(ERROR) << "Security failure...";
panic();
}
static bool set_highest_available_option_value(std::string path, int min, int max)
{
std::ifstream inf(path, std::fstream::in);
if (!inf) {
LOG(ERROR) << "Cannot open for reading: " << path;
return false;
}
int current = max;
while (current >= min) {
// try to write out new value
std::string str_val = std::to_string(current);
std::ofstream of(path, std::fstream::out);
if (!of) {
LOG(ERROR) << "Cannot open for writing: " << path;
return false;
}
of << str_val << std::endl;
of.close();
// check to make sure it was recorded
inf.seekg(0);
std::string str_rec;
inf >> str_rec;
if (str_val.compare(str_rec) == 0) {
break;
}
current--;
}
inf.close();
if (current < min) {
LOG(ERROR) << "Unable to set minimum option value " << min << " in " << path;
return false;
}
return true;
}
#define MMAP_RND_PATH "/proc/sys/vm/mmap_rnd_bits"
#define MMAP_RND_COMPAT_PATH "/proc/sys/vm/mmap_rnd_compat_bits"
/* __attribute__((unused)) due to lack of mips support: see mips block
* in set_mmap_rnd_bits_action */
static bool __attribute__((unused)) set_mmap_rnd_bits_min(int start, int min, bool compat) {
std::string path;
if (compat) {
path = MMAP_RND_COMPAT_PATH;
} else {
path = MMAP_RND_PATH;
}
return set_highest_available_option_value(path, min, start);
}
/*
* Set /proc/sys/vm/mmap_rnd_bits and potentially
* /proc/sys/vm/mmap_rnd_compat_bits to the maximum supported values.
* Returns -1 if unable to set these to an acceptable value.
*
* To support this sysctl, the following upstream commits are needed:
*
* d07e22597d1d mm: mmap: add new /proc tunable for mmap_base ASLR
* e0c25d958f78 arm: mm: support ARCH_MMAP_RND_BITS
* 8f0d3aa9de57 arm64: mm: support ARCH_MMAP_RND_BITS
* 9e08f57d684a x86: mm: support ARCH_MMAP_RND_BITS
* ec9ee4acd97c drivers: char: random: add get_random_long()
* 5ef11c35ce86 mm: ASLR: use get_random_long()
*/
static int set_mmap_rnd_bits_action(const std::vector<std::string>& args)
{
int ret = -1;
/* values are arch-dependent */
#if defined(__aarch64__)
/* arm64 supports 18 - 33 bits depending on pagesize and VA_SIZE */
if (set_mmap_rnd_bits_min(33, 24, false)
&& set_mmap_rnd_bits_min(16, 16, true)) {
ret = 0;
}
#elif defined(__x86_64__)
/* x86_64 supports 28 - 32 bits */
if (set_mmap_rnd_bits_min(32, 32, false)
&& set_mmap_rnd_bits_min(16, 16, true)) {
ret = 0;
}
#elif defined(__arm__) || defined(__i386__)
/* check to see if we're running on 64-bit kernel */
bool h64 = !access(MMAP_RND_COMPAT_PATH, F_OK);
/* supported 32-bit architecture must have 16 bits set */
if (set_mmap_rnd_bits_min(16, 16, h64)) {
ret = 0;
}
#elif defined(__mips__) || defined(__mips64__)
// TODO: add mips support b/27788820
ret = 0;
#else
LOG(ERROR) << "Unknown architecture";
#endif
if (ret == -1) {
LOG(ERROR) << "Unable to set adequate mmap entropy value!";
security_failure();
}
return ret;
}
#define KPTR_RESTRICT_PATH "/proc/sys/kernel/kptr_restrict"
#define KPTR_RESTRICT_MINVALUE 2
#define KPTR_RESTRICT_MAXVALUE 4
/* Set kptr_restrict to the highest available level.
*
* Aborts if unable to set this to an acceptable value.
*/
static int set_kptr_restrict_action(const std::vector<std::string>& args)
{
std::string path = KPTR_RESTRICT_PATH;
if (!set_highest_available_option_value(path, KPTR_RESTRICT_MINVALUE, KPTR_RESTRICT_MAXVALUE)) {
LOG(ERROR) << "Unable to set adequate kptr_restrict value!";
security_failure();
}
return 0;
}
static int keychord_init_action(const std::vector<std::string>& args)
{
keychord_init();
return 0;
}
static int console_init_action(const std::vector<std::string>& args)
{
std::string console = GetProperty("ro.boot.console", "");
if (!console.empty()) {
default_console = "/dev/" + console;
}
return 0;
}
static void import_kernel_nv(const std::string& key, const std::string& value, bool for_emulator) {
if (key.empty()) return;
if (for_emulator) {
// In the emulator, export any kernel option with the "ro.kernel." prefix.
property_set(StringPrintf("ro.kernel.%s", key.c_str()).c_str(), value.c_str());
return;
}
if (key == "qemu") {
strlcpy(qemu, value.c_str(), sizeof(qemu));
} else if (android::base::StartsWith(key, "androidboot.")) {
property_set(StringPrintf("ro.boot.%s", key.c_str() + 12).c_str(), value.c_str());
}
}
static void export_oem_lock_status() {
if (!android::base::GetBoolProperty("ro.oem_unlock_supported", false)) {
return;
}
std::string value = GetProperty("ro.boot.verifiedbootstate", "");
if (!value.empty()) {
property_set("ro.boot.flash.locked", value == "orange" ? "0" : "1");
}
}
static void export_kernel_boot_props() {
struct {
const char *src_prop;
const char *dst_prop;
const char *default_value;
} prop_map[] = {
{ "ro.boot.serialno", "ro.serialno", "", },
{ "ro.boot.mode", "ro.bootmode", "unknown", },
{ "ro.boot.baseband", "ro.baseband", "unknown", },
{ "ro.boot.bootloader", "ro.bootloader", "unknown", },
{ "ro.boot.hardware", "ro.hardware", "unknown", },
{ "ro.boot.revision", "ro.revision", "0", },
};
for (size_t i = 0; i < arraysize(prop_map); i++) {
std::string value = GetProperty(prop_map[i].src_prop, "");
property_set(prop_map[i].dst_prop, (!value.empty()) ? value.c_str() : prop_map[i].default_value);
}
}
/* Reads the content of device tree file into dt_value.
* Returns true if the read is success, false otherwise.
*/
static bool read_dt_file(const std::string& file_name, std::string* dt_value) {
if (android::base::ReadFileToString(file_name, dt_value)) {
if (!dt_value->empty()) {
dt_value->pop_back(); // Trim the trailing '\0' out.
return true;
}
}
return false;
}
static const std::string kAndroidDtDir("/proc/device-tree/firmware/android/");
static bool is_dt_value_expected(const std::string& dt_file_suffix,
const std::string& expected_value) {
std::string dt_value;
std::string file_name = kAndroidDtDir + dt_file_suffix;
if (read_dt_file(file_name, &dt_value)) {
if (dt_value == expected_value) {
return true;
}
}
return false;
}
static inline bool is_dt_compatible() {
return is_dt_value_expected("compatible", "android,firmware");
}
static inline bool is_dt_fstab_compatible() {
return is_dt_value_expected("fstab/compatible", "android,fstab");
}
static inline bool is_dt_vbmeta_compatible() {
return is_dt_value_expected("vbmeta/compatible", "android,vbmeta");
}
// Gets the vbmeta config from device tree. Specifically, the 'parts' and 'by_name_prefix'.
// /{
// firmware {
// android {
// vbmeta {
// compatible = "android,vbmeta";
// parts = "vbmeta,boot,system,vendor"
// by_name_prefix="/dev/block/platform/soc.0/f9824900.sdhci/by-name/"
// };
// };
// };
// }
static bool get_vbmeta_config_from_dt(std::string* vbmeta_partitions,
std::string* device_file_by_name_prefix) {
std::string file_name = kAndroidDtDir + "vbmeta/parts";
if (!read_dt_file(file_name, vbmeta_partitions)) return false;
file_name = kAndroidDtDir + "vbmeta/by_name_prefix";
if (!read_dt_file(file_name, device_file_by_name_prefix)) return false;
return true;
}
static void process_kernel_dt() {
if (!is_dt_compatible()) return;
std::unique_ptr<DIR, int (*)(DIR*)> dir(opendir(kAndroidDtDir.c_str()), closedir);
if (!dir) return;
std::string dt_file;
struct dirent *dp;
while ((dp = readdir(dir.get())) != NULL) {
if (dp->d_type != DT_REG || !strcmp(dp->d_name, "compatible") || !strcmp(dp->d_name, "name")) {
continue;
}
std::string file_name = kAndroidDtDir + dp->d_name;
android::base::ReadFileToString(file_name, &dt_file);
std::replace(dt_file.begin(), dt_file.end(), ',', '.');
std::string property_name = StringPrintf("ro.boot.%s", dp->d_name);
property_set(property_name.c_str(), dt_file.c_str());
}
}
static void process_kernel_cmdline() {
// The first pass does the common stuff, and finds if we are in qemu.
// The second pass is only necessary for qemu to export all kernel params
// as properties.
import_kernel_cmdline(false, import_kernel_nv);
if (qemu[0]) import_kernel_cmdline(true, import_kernel_nv);
}
static int property_enable_triggers_action(const std::vector<std::string>& args)
{
/* Enable property triggers. */
property_triggers_enabled = 1;
return 0;
}
static int queue_property_triggers_action(const std::vector<std::string>& args)
{
ActionManager::GetInstance().QueueBuiltinAction(property_enable_triggers_action, "enable_property_trigger");
ActionManager::GetInstance().QueueAllPropertyTriggers();
return 0;
}
static void selinux_init_all_handles(void)
{
sehandle = selinux_android_file_context_handle();
selinux_android_set_sehandle(sehandle);
sehandle_prop = selinux_android_prop_context_handle();
}
enum selinux_enforcing_status { SELINUX_PERMISSIVE, SELINUX_ENFORCING };
static selinux_enforcing_status selinux_status_from_cmdline() {
selinux_enforcing_status status = SELINUX_ENFORCING;
import_kernel_cmdline(false, [&](const std::string& key, const std::string& value, bool in_qemu) {
if (key == "androidboot.selinux" && value == "permissive") {
status = SELINUX_PERMISSIVE;
}
});
return status;
}
static bool selinux_is_enforcing(void)
{
if (ALLOW_PERMISSIVE_SELINUX) {
return selinux_status_from_cmdline() == SELINUX_ENFORCING;
}
return true;
}
static int audit_callback(void *data, security_class_t /*cls*/, char *buf, size_t len) {
property_audit_data *d = reinterpret_cast<property_audit_data*>(data);
if (!d || !d->name || !d->cr) {
LOG(ERROR) << "audit_callback invoked with null data arguments!";
return 0;
}
snprintf(buf, len, "property=%s pid=%d uid=%d gid=%d", d->name,
d->cr->pid, d->cr->uid, d->cr->gid);
return 0;
}
/*
* Forks, executes the provided program in the child, and waits for the completion in the parent.
* Child's stderr is captured and logged using LOG(ERROR).
*
* Returns true if the child exited with status code 0, returns false otherwise.
*/
static bool fork_execve_and_wait_for_completion(const char* filename, char* const argv[],
char* const envp[]) {
// Create a pipe used for redirecting child process's output.
// * pipe_fds[0] is the FD the parent will use for reading.
// * pipe_fds[1] is the FD the child will use for writing.
int pipe_fds[2];
if (pipe(pipe_fds) == -1) {
PLOG(ERROR) << "Failed to create pipe";
return false;
}
pid_t child_pid = fork();
if (child_pid == -1) {
PLOG(ERROR) << "Failed to fork for " << filename;
return false;
}
if (child_pid == 0) {
// fork succeeded -- this is executing in the child process
// Close the pipe FD not used by this process
TEMP_FAILURE_RETRY(close(pipe_fds[0]));
// Redirect stderr to the pipe FD provided by the parent
if (TEMP_FAILURE_RETRY(dup2(pipe_fds[1], STDERR_FILENO)) == -1) {
PLOG(ERROR) << "Failed to redirect stderr of " << filename;
_exit(127);
return false;
}
TEMP_FAILURE_RETRY(close(pipe_fds[1]));
if (execve(filename, argv, envp) == -1) {
PLOG(ERROR) << "Failed to execve " << filename;
return false;
}
// Unreachable because execve will have succeeded and replaced this code
// with child process's code.
_exit(127);
return false;
} else {
// fork succeeded -- this is executing in the original/parent process
// Close the pipe FD not used by this process
TEMP_FAILURE_RETRY(close(pipe_fds[1]));
// Log the redirected output of the child process.
// It's unfortunate that there's no standard way to obtain an istream for a file descriptor.
// As a result, we're buffering all output and logging it in one go at the end of the
// invocation, instead of logging it as it comes in.
const int child_out_fd = pipe_fds[0];
std::string child_output;
if (!android::base::ReadFdToString(child_out_fd, &child_output)) {
PLOG(ERROR) << "Failed to capture full output of " << filename;
}
TEMP_FAILURE_RETRY(close(child_out_fd));
if (!child_output.empty()) {
// Log captured output, line by line, because LOG expects to be invoked for each line
std::istringstream in(child_output);
std::string line;
while (std::getline(in, line)) {
LOG(ERROR) << filename << ": " << line;
}
}
// Wait for child to terminate
int status;
if (TEMP_FAILURE_RETRY(waitpid(child_pid, &status, 0)) != child_pid) {
PLOG(ERROR) << "Failed to wait for " << filename;
return false;
}
if (WIFEXITED(status)) {
int status_code = WEXITSTATUS(status);
if (status_code == 0) {
return true;
} else {
LOG(ERROR) << filename << " exited with status " << status_code;
}
} else if (WIFSIGNALED(status)) {
LOG(ERROR) << filename << " killed by signal " << WTERMSIG(status);
} else if (WIFSTOPPED(status)) {
LOG(ERROR) << filename << " stopped by signal " << WSTOPSIG(status);
} else {
LOG(ERROR) << "waitpid for " << filename << " returned unexpected status: " << status;
}
return false;
}
}
static bool read_first_line(const char* file, std::string* line) {
line->clear();
std::string contents;
if (!android::base::ReadFileToString(file, &contents, true /* follow symlinks */)) {
return false;
}
std::istringstream in(contents);
std::getline(in, *line);
return true;
}
static bool selinux_find_precompiled_split_policy(std::string* file) {
file->clear();
static constexpr const char precompiled_sepolicy[] = "/vendor/etc/selinux/precompiled_sepolicy";
if (access(precompiled_sepolicy, R_OK) == -1) {
return false;
}
std::string actual_plat_id;
if (!read_first_line("/system/etc/selinux/plat_and_mapping_sepolicy.cil.sha256",
&actual_plat_id)) {
PLOG(INFO) << "Failed to read "
"/system/etc/selinux/plat_and_mapping_sepolicy.cil.sha256";
return false;
}
std::string precompiled_plat_id;
if (!read_first_line("/vendor/etc/selinux/precompiled_sepolicy.plat_and_mapping.sha256",
&precompiled_plat_id)) {
PLOG(INFO) << "Failed to read "
"/vendor/etc/selinux/"
"precompiled_sepolicy.plat_and_mapping.sha256";
return false;
}
if ((actual_plat_id.empty()) || (actual_plat_id != precompiled_plat_id)) {
return false;
}
*file = precompiled_sepolicy;
return true;
}
static constexpr const char plat_policy_cil_file[] = "/system/etc/selinux/plat_sepolicy.cil";
static bool selinux_is_split_policy_device() { return access(plat_policy_cil_file, R_OK) != -1; }
/*
* Loads SELinux policy split across platform/system and non-platform/vendor files.
*
* Returns true upon success, false otherwise (failure cause is logged).
*/
static bool selinux_load_split_policy() {
// IMPLEMENTATION NOTE: Split policy consists of three CIL files:
// * platform -- policy needed due to logic contained in the system image,
// * non-platform -- policy needed due to logic contained in the vendor image,
// * mapping -- mapping policy which helps preserve forward-compatibility of non-platform policy
// with newer versions of platform policy.
//
// secilc is invoked to compile the above three policy files into a single monolithic policy
// file. This file is then loaded into the kernel.
// Load precompiled policy from vendor image, if a matching policy is found there. The policy
// must match the platform policy on the system image.
std::string precompiled_sepolicy_file;
if (selinux_find_precompiled_split_policy(&precompiled_sepolicy_file)) {
android::base::unique_fd fd(
open(precompiled_sepolicy_file.c_str(), O_RDONLY | O_CLOEXEC | O_BINARY));
if (fd != -1) {
if (selinux_android_load_policy_from_fd(fd, precompiled_sepolicy_file.c_str()) < 0) {
LOG(ERROR) << "Failed to load SELinux policy from " << precompiled_sepolicy_file;
return false;
}
return true;
}
}
// No suitable precompiled policy could be loaded
LOG(INFO) << "Compiling SELinux policy";
// Determine the highest policy language version supported by the kernel
set_selinuxmnt("/sys/fs/selinux");
int max_policy_version = security_policyvers();
if (max_policy_version == -1) {
PLOG(ERROR) << "Failed to determine highest policy version supported by kernel";
return false;
}
// We store the output of the compilation on /dev because this is the most convenient tmpfs
// storage mount available this early in the boot sequence.
char compiled_sepolicy[] = "/dev/sepolicy.XXXXXX";
android::base::unique_fd compiled_sepolicy_fd(mkostemp(compiled_sepolicy, O_CLOEXEC));
if (compiled_sepolicy_fd < 0) {
PLOG(ERROR) << "Failed to create temporary file " << compiled_sepolicy;
return false;
}
// clang-format off
const char* compile_args[] = {
"/system/bin/secilc",
plat_policy_cil_file,
"-M", "true",
// Target the highest policy language version supported by the kernel
"-c", std::to_string(max_policy_version).c_str(),
"/system/etc/selinux/mapping_sepolicy.cil",
"/vendor/etc/selinux/nonplat_sepolicy.cil",
"-o", compiled_sepolicy,
// We don't care about file_contexts output by the compiler
"-f", "/sys/fs/selinux/null", // /dev/null is not yet available
nullptr};
// clang-format on
if (!fork_execve_and_wait_for_completion(compile_args[0], (char**)compile_args, (char**)ENV)) {
unlink(compiled_sepolicy);
return false;
}
unlink(compiled_sepolicy);
LOG(INFO) << "Loading compiled SELinux policy";
if (selinux_android_load_policy_from_fd(compiled_sepolicy_fd, compiled_sepolicy) < 0) {
LOG(ERROR) << "Failed to load SELinux policy from " << compiled_sepolicy;
return false;
}
return true;
}
/*
* Loads SELinux policy from a monolithic file.
*
* Returns true upon success, false otherwise (failure cause is logged).
*/
static bool selinux_load_monolithic_policy() {
LOG(VERBOSE) << "Loading SELinux policy from monolithic file";
if (selinux_android_load_policy() < 0) {
PLOG(ERROR) << "Failed to load monolithic SELinux policy";
return false;
}
return true;
}
/*
* Loads SELinux policy into the kernel.
*
* Returns true upon success, false otherwise (failure cause is logged).
*/
static bool selinux_load_policy() {
return selinux_is_split_policy_device() ? selinux_load_split_policy()
: selinux_load_monolithic_policy();
}
static void selinux_initialize(bool in_kernel_domain) {
Timer t;
selinux_callback cb;
cb.func_log = selinux_klog_callback;
selinux_set_callback(SELINUX_CB_LOG, cb);
cb.func_audit = audit_callback;
selinux_set_callback(SELINUX_CB_AUDIT, cb);
if (in_kernel_domain) {
LOG(INFO) << "Loading SELinux policy";
if (!selinux_load_policy()) {
panic();
}
bool kernel_enforcing = (security_getenforce() == 1);
bool is_enforcing = selinux_is_enforcing();
if (kernel_enforcing != is_enforcing) {
if (security_setenforce(is_enforcing)) {
PLOG(ERROR) << "security_setenforce(%s) failed" << (is_enforcing ? "true" : "false");
security_failure();
}
}
if (!write_file("/sys/fs/selinux/checkreqprot", "0")) {
security_failure();
}
// init's first stage can't set properties, so pass the time to the second stage.
setenv("INIT_SELINUX_TOOK", std::to_string(t.duration_ms()).c_str(), 1);
} else {
selinux_init_all_handles();
}
}
// The files and directories that were created before initial sepolicy load
// need to have their security context restored to the proper value.
// This must happen before /dev is populated by ueventd.
static void selinux_restore_context() {
LOG(INFO) << "Running restorecon...";
restorecon("/dev");
restorecon("/dev/kmsg");
if constexpr (WORLD_WRITABLE_KMSG) {
restorecon("/dev/kmsg_debug");
}
restorecon("/dev/socket");
restorecon("/dev/random");
restorecon("/dev/urandom");
restorecon("/dev/__properties__");
restorecon("/plat_property_contexts");
restorecon("/nonplat_property_contexts");
restorecon("/sys", SELINUX_ANDROID_RESTORECON_RECURSE);
restorecon("/dev/block", SELINUX_ANDROID_RESTORECON_RECURSE);
restorecon("/dev/device-mapper");
}
// Set the UDC controller for the ConfigFS USB Gadgets.
// Read the UDC controller in use from "/sys/class/udc".
// In case of multiple UDC controllers select the first one.
static void set_usb_controller() {
std::unique_ptr<DIR, decltype(&closedir)>dir(opendir("/sys/class/udc"), closedir);
if (!dir) return;
dirent* dp;
while ((dp = readdir(dir.get())) != nullptr) {
if (dp->d_name[0] == '.') continue;
property_set("sys.usb.controller", dp->d_name);
break;
}
}
// Creates "/dev/block/dm-XX" for dm-verity by running coldboot on /sys/block/dm-XX.
static void device_init_dm_device(const std::string& dm_device) {
const std::string device_name(basename(dm_device.c_str()));
const std::string syspath = "/sys/block/" + device_name;
device_init(syspath.c_str(), [&](uevent* uevent) -> coldboot_action_t {
if (uevent->device_name == device_name) {
LOG(VERBOSE) << "early_mount: creating dm-verity device : " << dm_device;
return COLDBOOT_STOP;
}
return COLDBOOT_CONTINUE;
});
device_close();
}
static bool vboot_1_0_mount_partitions(const std::vector<fstab_rec*>& fstab_recs) {
if (fstab_recs.empty()) return false;
for (auto rec : fstab_recs) {
bool need_create_dm_device = false;
if (fs_mgr_is_verified(rec)) {
// setup verity and create the dm-XX block device
// needed to mount this partition
int ret = fs_mgr_setup_verity(rec, false /* wait_for_verity_dev */);
if (ret == FS_MGR_SETUP_VERITY_DISABLED) {
LOG(INFO) << "verity disabled for '" << rec->mount_point << "'";
} else if (ret == FS_MGR_SETUP_VERITY_SUCCESS) {
need_create_dm_device = true;
} else {
PLOG(ERROR) << "early_mount: failed to setup verity for '" << rec->mount_point
<< "'";
return false;
}
}
if (need_create_dm_device) {
// The exact block device name (rec->blk_device) is changed to "/dev/block/dm-XX".
// Need to create it because ueventd isn't started during early mount.
device_init_dm_device(rec->blk_device);
}
if (fs_mgr_do_mount_one(rec)) {
PLOG(ERROR) << "early_mount: failed to mount '" << rec->mount_point << "'";
return false;
}
}
return true;
}
static bool vboot_2_0_mount_partitions(const std::vector<fstab_rec*>& fstab_recs,
const std::string& device_file_by_name_prefix) {
if (fstab_recs.empty()) return false;
FsManagerAvbUniquePtr avb_handle = FsManagerAvbHandle::Open(device_file_by_name_prefix);
if (!avb_handle) {
LOG(INFO) << "Failed to Open FsManagerAvbHandle";
return false;
}
setenv("INIT_AVB_VERSION", avb_handle->avb_version().c_str(), 1);
for (auto rec : fstab_recs) {
bool need_create_dm_device = false;
if (fs_mgr_is_avb(rec)) {
if (avb_handle->hashtree_disabled()) {
LOG(INFO) << "avb hashtree disabled for '" << rec->mount_point << "'";
} else if (avb_handle->SetUpAvb(rec, false /* wait_for_verity_dev */)) {
need_create_dm_device = true;
} else {
PLOG(ERROR) << "early_mount: failed to set up AVB on partition: '"
<< rec->mount_point << "'";
return false;
}
}
if (need_create_dm_device) {
// The exact block device name (rec->blk_device) is changed to "/dev/block/dm-XX".
// Need to create it because ueventd isn't started during early mount.
device_init_dm_device(rec->blk_device);
}
if (fs_mgr_do_mount_one(rec)) {
PLOG(ERROR) << "early_mount: failed to mount '" << rec->mount_point << "'";
return false;
}
}
return true;
}
static bool mount_early_partitions(const std::vector<fstab_rec*>& fstab_recs,
const std::string& device_file_by_name_prefix) {
if (is_dt_vbmeta_compatible()) { // AVB (external/avb) is used to setup dm-verity.
return vboot_2_0_mount_partitions(fstab_recs, device_file_by_name_prefix);
} else {
return vboot_1_0_mount_partitions(fstab_recs);
}
}
// Creates devices with uevent->partition_name matching one in the in/out
// partition_names. Note that the partition_names MUST have A/B suffix
// when A/B is used. Found partitions will then be removed from the
// partition_names for caller to check which devices are NOT created.
static void early_device_init(std::set<std::string>* partition_names) {
if (partition_names->empty()) {
return;
}
device_init(nullptr, [=](uevent* uevent) -> coldboot_action_t {
// we need platform devices to create symlinks
if (uevent->subsystem == "platform") {
return COLDBOOT_CREATE;
}
// Ignore everything that is not a block device
if (uevent->subsystem != "block") {
return COLDBOOT_CONTINUE;
}
if (!uevent->partition_name.empty()) {
// match partition names to create device nodes for partitions
// both partition_names and uevent->partition_name have A/B suffix when A/B is used
auto iter = partition_names->find(uevent->partition_name);
if (iter != partition_names->end()) {
LOG(VERBOSE) << "early_mount: found partition: " << *iter;
partition_names->erase(iter);
if (partition_names->empty()) {
return COLDBOOT_STOP; // found all partitions, stop coldboot
} else {
return COLDBOOT_CREATE; // create this device and continue to find others
}
}
}
// Not found a partition or find an unneeded partition, continue to find others
return COLDBOOT_CONTINUE;
});
}
static bool vboot_1_0_early_partitions(const std::vector<fstab_rec*>& early_fstab_recs,
std::set<std::string>* out_partitions,
bool* out_need_verity) {
std::string meta_partition;
for (auto fstab_rec : early_fstab_recs) {
// don't allow verifyatboot for early mounted partitions
if (fs_mgr_is_verifyatboot(fstab_rec)) {
LOG(ERROR) << "early_mount: partitions can't be verified at boot";
return false;
}
// check for verified partitions
if (fs_mgr_is_verified(fstab_rec)) {
*out_need_verity = true;
}
// check if verity metadata is on a separate partition and get partition
// name from the end of the ->verity_loc path. verity state is not partition
// specific, so there must be only 1 additional partition that carries
// verity state.
if (fstab_rec->verity_loc) {
if (!meta_partition.empty()) {
LOG(ERROR) << "early_mount: more than one meta partition found: " << meta_partition
<< ", " << basename(fstab_rec->verity_loc);
return false;
} else {
meta_partition = basename(fstab_rec->verity_loc);
}
}
}
// includes those early mount partitions and meta_partition (if any)
// note that fstab_rec->blk_device has A/B suffix updated by fs_mgr when A/B is used
for (auto fstab_rec : early_fstab_recs) {
out_partitions->emplace(basename(fstab_rec->blk_device));
}
if (!meta_partition.empty()) {
out_partitions->emplace(std::move(meta_partition));
}
return true;
}
// a.k.a. AVB (external/avb)
static bool vboot_2_0_early_partitions(std::set<std::string>* out_partitions, bool* out_need_verity,
std::string* out_device_file_by_name_prefix) {
std::string vbmeta_partitions;
if (!get_vbmeta_config_from_dt(&vbmeta_partitions, out_device_file_by_name_prefix)) {
return false;
}
// libavb verifies AVB metadata on all verified partitions at once.
// e.g., The vbmeta_partitions will be "vbmeta,boot,system,vendor"
// for libavb to verify metadata, even if we only need to early mount /vendor.
std::vector<std::string> partitions = android::base::Split(vbmeta_partitions, ",");
std::string ab_suffix = fs_mgr_get_slot_suffix();
for (const auto& partition : partitions) {
out_partitions->emplace(partition + ab_suffix);
}
*out_need_verity = true;
return true;
}
static bool get_early_partitions(const std::vector<fstab_rec*>& early_fstab_recs,
std::set<std::string>* out_partitions, bool* out_need_verity,
std::string* out_device_file_by_name_prefix) {
*out_need_verity = false;
out_partitions->clear();
out_device_file_by_name_prefix->clear();
if (is_dt_vbmeta_compatible()) { // AVB (external/avb) is used to setup dm-verity.
return vboot_2_0_early_partitions(out_partitions, out_need_verity,
out_device_file_by_name_prefix);
} else {
return vboot_1_0_early_partitions(early_fstab_recs, out_partitions, out_need_verity);
}
}
/* Early mount vendor and ODM partitions. The fstab is read from device-tree. */
static bool early_mount() {
// skip early mount if we're in recovery mode
if (access("/sbin/recovery", F_OK) == 0) {
LOG(INFO) << "Early mount skipped (recovery mode)";
return true;
}
// first check if device tree fstab entries are compatible
if (!is_dt_fstab_compatible()) {
LOG(INFO) << "Early mount skipped (missing/incompatible fstab in device tree)";
return true;
}
std::unique_ptr<fstab, decltype(&fs_mgr_free_fstab)> tab(
fs_mgr_read_fstab_dt(), fs_mgr_free_fstab);
if (!tab) {
LOG(ERROR) << "Early mount failed to read fstab from device tree";
return false;
}
// find out fstab records for odm, system and vendor
std::vector<fstab_rec*> early_fstab_recs;
for (auto mount_point : {"/odm", "/system", "/vendor"}) {
fstab_rec* fstab_rec = fs_mgr_get_entry_for_mount_point(tab.get(), mount_point);
if (fstab_rec != nullptr) {
early_fstab_recs.push_back(fstab_rec);
}
}
// nothing to early mount
if (early_fstab_recs.empty()) return true;
bool need_verity;
std::string device_file_by_name_prefix;
std::set<std::string> partition_names;
// partition_names MUST have A/B suffix when A/B is used
if (!get_early_partitions(early_fstab_recs, &partition_names, &need_verity,
&device_file_by_name_prefix)) {
return false;
}
bool success = false;
// create the devices we need..
early_device_init(&partition_names);
// early_device_init will remove found partitions from partition_names
// So if the partition_names is not empty here, means some partitions
// are not found
if (!partition_names.empty()) {
LOG(ERROR) << "early_mount: partition(s) not found: "
<< android::base::Join(partition_names, ", ");
goto done;
}
if (need_verity) {
// create /dev/device mapper
device_init("/sys/devices/virtual/misc/device-mapper",
[&](uevent* uevent) -> coldboot_action_t { return COLDBOOT_STOP; });
}
if (mount_early_partitions(early_fstab_recs, device_file_by_name_prefix)) {
success = true;
}
done:
device_close();
return success;
}
static void install_reboot_signal_handlers() {
// Instead of panic'ing the kernel as is the default behavior when init crashes,
// we prefer to reboot to bootloader on development builds, as this will prevent
// boot looping bad configurations and allow both developers and test farms to easily
// recover.
struct sigaction action;
memset(&action, 0, sizeof(action));
sigfillset(&action.sa_mask);
action.sa_handler = [](int) {
// panic() reboots to bootloader
panic();
};
action.sa_flags = SA_RESTART;
sigaction(SIGABRT, &action, nullptr);
sigaction(SIGBUS, &action, nullptr);
sigaction(SIGFPE, &action, nullptr);
sigaction(SIGILL, &action, nullptr);
sigaction(SIGSEGV, &action, nullptr);
#if defined(SIGSTKFLT)
sigaction(SIGSTKFLT, &action, nullptr);
#endif
sigaction(SIGSYS, &action, nullptr);
sigaction(SIGTRAP, &action, nullptr);
}
int main(int argc, char** argv) {
if (!strcmp(basename(argv[0]), "ueventd")) {
return ueventd_main(argc, argv);
}
if (!strcmp(basename(argv[0]), "watchdogd")) {
return watchdogd_main(argc, argv);
}
if (REBOOT_BOOTLOADER_ON_PANIC) {
install_reboot_signal_handlers();
}
add_environment("PATH", _PATH_DEFPATH);
bool is_first_stage = (getenv("INIT_SECOND_STAGE") == nullptr);
if (is_first_stage) {
boot_clock::time_point start_time = boot_clock::now();
// Clear the umask.
umask(0);
// Get the basic filesystem setup we need put together in the initramdisk
// on / and then we'll let the rc file figure out the rest.
mount("tmpfs", "/dev", "tmpfs", MS_NOSUID, "mode=0755");
mkdir("/dev/pts", 0755);
mkdir("/dev/socket", 0755);
mount("devpts", "/dev/pts", "devpts", 0, NULL);
#define MAKE_STR(x) __STRING(x)
mount("proc", "/proc", "proc", 0, "hidepid=2,gid=" MAKE_STR(AID_READPROC));
// Don't expose the raw commandline to unprivileged processes.
chmod("/proc/cmdline", 0440);
gid_t groups[] = { AID_READPROC };
setgroups(arraysize(groups), groups);
mount("sysfs", "/sys", "sysfs", 0, NULL);
mount("selinuxfs", "/sys/fs/selinux", "selinuxfs", 0, NULL);
mknod("/dev/kmsg", S_IFCHR | 0600, makedev(1, 11));
if constexpr (WORLD_WRITABLE_KMSG) {
mknod("/dev/kmsg_debug", S_IFCHR | 0622, makedev(1, 11));
}
mknod("/dev/random", S_IFCHR | 0666, makedev(1, 8));
mknod("/dev/urandom", S_IFCHR | 0666, makedev(1, 9));
// Now that tmpfs is mounted on /dev and we have /dev/kmsg, we can actually
// talk to the outside world...
InitKernelLogging(argv);
LOG(INFO) << "init first stage started!";
if (!early_mount()) {
LOG(ERROR) << "Failed to mount required partitions early ...";
panic();
}
// Set up SELinux, loading the SELinux policy.
selinux_initialize(true);
// We're in the kernel domain, so re-exec init to transition to the init domain now
// that the SELinux policy has been loaded.
if (restorecon("/init") == -1) {
PLOG(ERROR) << "restorecon failed";
security_failure();
}
setenv("INIT_SECOND_STAGE", "true", 1);
static constexpr uint32_t kNanosecondsPerMillisecond = 1e6;
uint64_t start_ms = start_time.time_since_epoch().count() / kNanosecondsPerMillisecond;
setenv("INIT_STARTED_AT", StringPrintf("%" PRIu64, start_ms).c_str(), 1);
char* path = argv[0];
char* args[] = { path, nullptr };
execv(path, args);
// execv() only returns if an error happened, in which case we
// panic and never fall through this conditional.
PLOG(ERROR) << "execv(\"" << path << "\") failed";
security_failure();
}
// At this point we're in the second stage of init.
InitKernelLogging(argv);
LOG(INFO) << "init second stage started!";
// Indicate that booting is in progress to background fw loaders, etc.
close(open("/dev/.booting", O_WRONLY | O_CREAT | O_CLOEXEC, 0000));
property_init();
// If arguments are passed both on the command line and in DT,
// properties set in DT always have priority over the command-line ones.
process_kernel_dt();
process_kernel_cmdline();
// Propagate the kernel variables to internal variables
// used by init as well as the current required properties.
export_kernel_boot_props();
// Make the time that init started available for bootstat to log.
property_set("ro.boottime.init", getenv("INIT_STARTED_AT"));
property_set("ro.boottime.init.selinux", getenv("INIT_SELINUX_TOOK"));
// Set libavb version for Framework-only OTA match in Treble build.
const char* avb_version = getenv("INIT_AVB_VERSION");
if (avb_version) property_set("ro.boot.avb_version", avb_version);
// Clean up our environment.
unsetenv("INIT_SECOND_STAGE");
unsetenv("INIT_STARTED_AT");
unsetenv("INIT_SELINUX_TOOK");
unsetenv("INIT_AVB_VERSION");
// Now set up SELinux for second stage.
selinux_initialize(false);
selinux_restore_context();
epoll_fd = epoll_create1(EPOLL_CLOEXEC);
if (epoll_fd == -1) {
PLOG(ERROR) << "epoll_create1 failed";
exit(1);
}
signal_handler_init();
property_load_boot_defaults();
export_oem_lock_status();
start_property_service();
set_usb_controller();
const BuiltinFunctionMap function_map;
Action::set_function_map(&function_map);
ActionManager& am = ActionManager::GetInstance();
ServiceManager& sm = ServiceManager::GetInstance();
Parser& parser = Parser::GetInstance();
parser.AddSectionParser("service", std::make_unique<ServiceParser>(&sm));
parser.AddSectionParser("on", std::make_unique<ActionParser>(&am));
parser.AddSectionParser("import", std::make_unique<ImportParser>(&parser));
std::string bootscript = GetProperty("ro.boot.init_rc", "");
if (bootscript.empty()) {
parser.ParseConfig("/init.rc");
parser.set_is_system_etc_init_loaded(
parser.ParseConfig("/system/etc/init"));
parser.set_is_vendor_etc_init_loaded(
parser.ParseConfig("/vendor/etc/init"));
parser.set_is_odm_etc_init_loaded(parser.ParseConfig("/odm/etc/init"));
} else {
parser.ParseConfig(bootscript);
parser.set_is_system_etc_init_loaded(true);
parser.set_is_vendor_etc_init_loaded(true);
parser.set_is_odm_etc_init_loaded(true);
}
// Turning this on and letting the INFO logging be discarded adds 0.2s to
// Nexus 9 boot time, so it's disabled by default.
if (false) DumpState();
am.QueueEventTrigger("early-init");
// Queue an action that waits for coldboot done so we know ueventd has set up all of /dev...
am.QueueBuiltinAction(wait_for_coldboot_done_action, "wait_for_coldboot_done");
// ... so that we can start queuing up actions that require stuff from /dev.
am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
am.QueueBuiltinAction(set_mmap_rnd_bits_action, "set_mmap_rnd_bits");
am.QueueBuiltinAction(set_kptr_restrict_action, "set_kptr_restrict");
am.QueueBuiltinAction(keychord_init_action, "keychord_init");
am.QueueBuiltinAction(console_init_action, "console_init");
// Trigger all the boot actions to get us started.
am.QueueEventTrigger("init");
// Repeat mix_hwrng_into_linux_rng in case /dev/hw_random or /dev/random
// wasn't ready immediately after wait_for_coldboot_done
am.QueueBuiltinAction(mix_hwrng_into_linux_rng_action, "mix_hwrng_into_linux_rng");
// Don't mount filesystems or start core system services in charger mode.
std::string bootmode = GetProperty("ro.bootmode", "");
if (bootmode == "charger") {
am.QueueEventTrigger("charger");
} else {
am.QueueEventTrigger("late-init");
}
// Run all property triggers based on current state of the properties.
am.QueueBuiltinAction(queue_property_triggers_action, "queue_property_triggers");
while (true) {
// By default, sleep until something happens.
int epoll_timeout_ms = -1;
if (!(waiting_for_prop || sm.IsWaitingForExec())) {
am.ExecuteOneCommand();
}
if (!(waiting_for_prop || sm.IsWaitingForExec())) {
restart_processes();
// If there's a process that needs restarting, wake up in time for that.
if (process_needs_restart_at != 0) {
epoll_timeout_ms = (process_needs_restart_at - time(nullptr)) * 1000;
if (epoll_timeout_ms < 0) epoll_timeout_ms = 0;
}
// If there's more work to do, wake up again immediately.
if (am.HasMoreCommands()) epoll_timeout_ms = 0;
}
epoll_event ev;
int nr = TEMP_FAILURE_RETRY(epoll_wait(epoll_fd, &ev, 1, epoll_timeout_ms));
if (nr == -1) {
PLOG(ERROR) << "epoll_wait failed";
} else if (nr == 1) {
((void (*)()) ev.data.ptr)();
}
}
return 0;
}
Reference in a new issue View git blame Copy permalink