Now that FDE support has been removed, encrypt_inplace() is only used by
metadata encryption, which passes false for the set_progress_properties
parameter. Therefore, remove the set_progress_properties parameter and
the associated code to update the "vold.encrypt_inplace" and
"vold.encrypt_time_remaining" system properties.
Note that encrypt_inplace() still keeps track of its progress to some
extent, for the purpose of printing log messages; that hasn't changed.
Bug: 208476087
Change-Id: If695db1c4e23f568ff865bccc9fc1b98148815be
fsync() the cryptofd when done writing to it. Without this, any
remaining dirty pages in the crypto_blkdev's page cache (which there
might be a lot of, even as much as all the data that was written) won't
be flushed to disk until the cryptofd is closed, which ignores I/O
errors and is also after we already reported 100% completion.
There wasn't an fsync() in the original version either, so we've been
getting by without it, but it seems it should be there.
Change-Id: Idd1be3ae67ce96ecf3946b9efb9fc57414f5805a
Refactor EncryptInplace.cpp to simplify and improve it a lot. This is
everything that didn't fit into prior commits, including:
- Share a lot more code between ext4, f2fs, and full encryption.
- Improve the log messages. Most importantly, don't spam the log with
huge numbers of messages, and don't log errors in expected cases.
Note: generate_f2fs_info() is still too noisy, but that's part of
"system/extras", not vold, so this change doesn't change that.
- When possible, do 32K reads/writes for f2fs and for full encryption,
not just for ext4. This might improve performance.
- Take advantage of C++ functionality.
- Be more careful about edge cases. E.g. if the calculation of the
number of blocks to encrypt was wrong, don't set vold.encrypt_progress
to > 99 until we're actually done.
The net change is over 200 lines removed.
Before-after comparison of log when enabling metadata encryption:
ext4 before:
I vold : Beginning inplace encryption, nr_sec: 16777216
D vold : cryptfs_enable_inplace(/dev/block/dm-8, /dev/block/by-name/userdata, 16777216, 0)
D vold : Opening/dev/block/by-name/userdata
D vold : Opening/dev/block/dm-8
I vold : Encrypting ext4 filesystem in place...
[omitted 6387 log messages]
I vold : Encrypted to sector 822084608
D vold : cryptfs_enable_inplace_ext4 success
I vold : Inplace encryption complete
ext4 after:
D vold : encrypt_inplace(/dev/block/dm-8, /dev/block/by-name/userdata, 16777216, false)
D vold : ext4 filesystem has 64 block groups
I vold : Encrypting ext4 filesystem on /dev/block/by-name/userdata in-place via /dev/block/dm-8
I vold : 50327 blocks (206 MB) of 2097152 blocks are in-use
D vold : Encrypted 10000 of 50327 blocks
D vold : Encrypted 20000 of 50327 blocks
D vold : Encrypted 30000 of 50327 blocks
D vold : Encrypted 40000 of 50327 blocks
D vold : Encrypted 50000 of 50327 blocks
D vold : Encrypted 50327 of 50327 blocks
I vold : Successfully encrypted ext4 filesystem on /dev/block/by-name/userdata
f2fs before:
I vold : Beginning inplace encryption, nr_sec: 16777216
D vold : cryptfs_enable_inplace(/dev/block/dm-8, /dev/block/by-name/userdata, 16777216, 0)
D vold : Opening/dev/block/by-name/userdata
D vold : Opening/dev/block/dm-8
E vold : Reading ext4 extent caused an exception
D vold : cryptfs_enable_inplace_ext4()=-1
[omitted logspam from f2fs_sparseblock]
I vold : Encrypting from block 0
I vold : Encrypted to block 15872
I vold : Encrypting from block 16384
I vold : Encrypted to block 16385
I vold : Encrypting from block 17408
I vold : Encrypted to block 17412
D vold : cryptfs_enable_inplace_f2fs success
I vold : Inplace encryption complete
f2fs after:
D vold : encrypt_inplace(/dev/block/dm-8, /dev/block/by-name/userdata, 16777216, false)
[omitted logspam from f2fs_sparseblock]
I vold : Encrypting f2fs filesystem on /dev/block/by-name/userdata in-place via /dev/block/dm-8
I vold : 15880 blocks (65 MB) of 2097152 blocks are in-use
D vold : Encrypted 10000 of 15880 blocks
D vold : Encrypted 15880 of 15880 blocks
I vold : Successfully encrypted f2fs filesystem on /dev/block/by-name/userdata
Test: Booted Cuttlefish with metadata encryption enabled and with the
userdata filesystem using (1) ext4, (2) f2fs, and (3) f2fs but
with EncryptInplace.cpp patched to not recognize the filesystem
and fall back to the "full" encryption case. Checked that the log
messages were as expected and that /data was mounted.
I've had no luck testing FDE yet; it doesn't work even without
these changes. Suggestions appreciated...
Change-Id: I08fc8465f7962abd698904b5466f3ed080d53953
The calculated number of blocks to encrypt is too high on ext4
filesystems that have the uninit_bg feature. This is because the
calculation assumes that all blocks not counted in bg_free_blocks_count
need to encrypted. But actually, uninitialized block groups have inode
blocks which vold doesn't encrypt since they are uninitialized, but they
are "allocated" and thus reduce bg_free_blocks_count.
Therefore, add a helper function num_base_meta_blocks_in_group() which
returns the number of blocks to encrypt in an uninitialized block group.
Use it both for the encryption and for calculating 'tot_used_blocks'.
Also compute 'tot_used_blocks' additively rather than subtractively, as
this is easier to understand.
Test: see I08fc8465f7962abd698904b5466f3ed080d53953
Change-Id: I4d2cb40291da67dd1bafd61289ccb9e6343bfda3
'struct f2fs_info' from system/extras/f2fs_utils is supposed to be
freed using free_f2fs_info(), not just free().
Test: see I08fc8465f7962abd698904b5466f3ed080d53953
Change-Id: If6e75e5c604b40be24538b156a37cc76f4f0d4f7
This logic is no longer necessary, since the code that creates the
crypto_blkdev (create_crypto_blk_dev() in MetadataCrypt.cpp or in
cryptfs.cpp) now waits for the block device to appear before continuing.
It's also worth noting that the retry loop was only present for ext4,
not for f2fs, yet most Android devices are using f2fs these days.
Test: see I08fc8465f7962abd698904b5466f3ed080d53953
Change-Id: I173ca6cc187a810e008990dfa22aede58632db25
Commit 87999173dd ("Don't corrupt ssd when encrypting and power
fails") added a lot of code to handle pausing in-place conversion from
unencrypted => FDE when the battery was low, and resuming it later.
It was eventually decided that this wasn't needed, and commit
7e17e2d226 ("Don't worry about battery levels when encrypting")
removed the checks for low battery.
This made the partial encryption code unused. So remove it.
Note that this was cluttering up the metadata encryption code too, since
EncryptInplace.cpp is now shared by both FDE and metadata encryption.
Bug: 16868177
Test: see I08fc8465f7962abd698904b5466f3ed080d53953
Change-Id: Ibd2eb08a2aa15938097abcb8a67b5a813c4d76c7
Nothing defines CONFIG_HW_DISK_ENCRYPTION, so remove the unused code
that's conditional on it being defined.
Change-Id: Ie435e138686eb4eac47d9aa762ae06f1645a117f
Block groups with EXT4_BG_BLOCK_UNINIT still have backup superblocks
(and backup block group descriptors). Fix EncryptInPlace to encrypt
these backup superblocks rather than leave them unencrypted.
Previously leaving the backup superblocks unencrypted didn't cause any
problems, but due to system/core commit 72abd7b246f7 ("Try to recover
corrupted ext4 /data with backup superblock") it is causing problems.
Bug: 162479411
Bug: 161871210
Change-Id: Ic090bf4e88193b289b04c5254ddf661ef40b037e
time_started in encryptGroupsData is set from and compared to
clock_gettime(CLOCK_MONOTONIC, ...) nearly everywhere: "Clock that
cannot be set and represents monotonic time since some unspecified
starting point". However in cryptfs_enable_inplace_f2fs() it is set
from a different clock, time(NULL), with the result that the setprop
calls that indicate progress are wrong and can be called much too
often. The fix is to make this function consistent with
cryptfs_enable_inplace_ext4.
Bug: 146877356
Change-Id: I2707180e5c5bf723a5a880f6a3aac47f2bb34ccd
When both ext4 user data checkpoints and metadata encryption are
enabled, we are creating two stacked dm devices. This had not been
properly thought through or debugged.
Test: Enable metadata encryption on taimen (add
keydirectory=/metadata/vold/metadata_encryption to flags for userdata in
fstab.hardware)
Unfortunately metadata is not wiped by fastboot -w, so it is
necessary to rm metadata/vold -rf whenever you wipe data.
fastboot flashall -w works
fastboot reboot -w works
A normal boot works
Disable checkpoint commits with
setprop persist.vold.dont_commit_checkpoint 1
vdc checkpoint startCheckpoint 10
adb reboot
wait for device to fully boot then
adb reboot
Wait for device to fully boot then
adb logcat -d | grep Checkpoint shows the rollback in the logs
This tests encryption on top of checkpoints with commit, encryption
without checkpoints, and rollback, which seems to be the key cases.
Bug: 135905679
Change-Id: I8365a40298b752af4bb10d00d9ff58ce04beab1f
We rename our 'buf' in the inner scope to avoid confusion with
the 'buf' in the outer scope which is used immediately after
exiting the inner scope.
Test: TreeHugger
Change-Id: I1c50546e86c680e963eedcbda26138f8b43e55e9
This will allow adding lots of verbose logs which can be enabled
only during local testing/debugging. Update the existing verbose
level logs to debug level since we want those to be logged by
default.
Test: manual
Change-Id: Ib05e2b6efa71308458d49affb6ed81d3975b28ab
Don't use the FDE flow to support metadata encryption; just provide a
vold service which directly mounts the volume and use that.
Bug: 63927601
Test: Boot Taimen to SUW with and without metadata encryption.
Change-Id: Ifc6a012c02c0ea66893020ed1d0da4cba6914aed
