By default FUSE filesystems have a max_ratio of 1%, meaning only 1% of
dirty pages on the system can belong to a FUSE filesystem before we
start writing back pages (and throttling, if writeback can't keep up).
This limit is useful for untrusted filesystems, but in our case, we
trust the FUSE filesystem. Since FUSE writes result in writes to the
lower filesystem, FUSE should take at most 50%. Let's start with
changing max_ratio to 40%, to avoid needless throttling.
Bug: 159254170
Bug: 159770752
Test: inspect /sys/class/bdi manually after boot
Change-Id: I467e3770fc4afba0a08fa480c0b86aa054c8b875
For fuse read ahead can be configured by writing a value to the
/sys/class/bdi/{MAJOR}:{MINOR}/read_ahead_kb file.
There are several different ways of getting {MAJOR}:{MINOR} values of
the filesystem:
* Look at st_dev of stat("/mnt/user/0/emulated").
* Parse /proc/self/mountinfo.
Stat'ing approach is used since it's easier to implement.
Bug: 157982297
Test: atest vold_tests
Test: adb shell cat /proc/self/mountinfo to get MAJOR:MINOR
Test: adb shell cat /sys/class/bdi/{MAJOR}:{MINOR}/read_ahead_kb
Test: created public volume, checked it's read_ahead_kb is also 256
Change-Id: Id0c149c4af1ceabf3afc33b4100563a512b38316
This can be done through binder as well as vdc, using 'vdc volume
abort_fuse'.
Bug: 153411204
Test: adb shell vdc volume abort_fuse
Change-Id: I93e46dc1cd361729cc1162c63520cf73152ea409
This allows devices that have sdcardfs enabled in the kernel to not use
it. When external_storage.sdcardfs.enabled=0, sdcardfs will not be
mounted. This is treated as default true to not affect upgrading
devices. It does not use the old ro.sys.sdcardfs as that has been
repurposed over time and no longer can be relied on to turn off
sdcardfs. This is included within emulated_storage.mk
Bug: 155222498
Test: mount|grep "type sdcardfs" should find nothing after boot complete
if external_storage.sdcardfs.enabled=0
Change-Id: I23d75fb1225aeabbcb1a035ad62fd042b6b3c7b5
The Android Emulator isn't the only virtual device the virtio-block
detection code is useful for, and those platforms might not set any
discriminating properties to indicate that they are virtual.
Rework the virtio-block major detection to use /proc/devices instead
of hardcoding the assumption that any virtual platform can have
virtio-block at any experimental major; the new code permits only the
exact experimental major assigned to virtio-block.
The new code runs everywhere, but it will only run once and could be
expanded later to detect dynamic or experimental majors.
Bug: 156286088
Change-Id: Ieae805d08fddd0124a397636f04d99194a9ef7e5
- Remove bind mounting Android/ code as we want to bind mount obb dir
for each process instead.
- Set property "vold.vold.fuse_running_users" as an array of user id
for which fuse is ready to use.
- After fuse is ready for a user, fork a background process in vold
to bind mount all direct boot apps for that user so its direct boot
apps obb dir will be mounted to lower fs for imporoved performance.
Bug: 148049767
Bug: 137890172
Test: After flag is enabled, AdoptableHostTest still pass.
Change-Id: I90079fbeed1c91f9780ca71e37b0012884680b7c
This can be used to fixup application directories in case they have been
created by some other entity besides vold; the main use case for this
API right now is OBB directories, which can be created by installers
outside of vold; on devices without sdcardfs, such directories and the
files contained therein are not setup correctly. This API will make sure
everything is setup the way it needs to be setup.
Bug: 146419093
Test: inspect OBB dir after install
Change-Id: I2e35b7ac2992dbb21cc950e53651ffc07cfca907
This was hard to read and understand. Instead, fall back to explicit
string operations with more comments on what we're doing and what we're
allowing.
This also fixes an issue where apps were asking us to create dirs on
their behalf that our more than 2 levels deep, eg
com.foo/files/downloads ; I thought such paths weren't allowed, but
apparently they are (and there's no good reason for us to not set them
up correctly).
Bug: 149407572
Test: launch opera
Change-Id: I7c64831032b66e90960b96e41ee42c7d616a759c
A regex allows us to be more specific in what kind of directories we
accept here, which in turn makes it easier to correctly create them.
Bug: 146419093
Test: atest FuseDaemonHostTest
Change-Id: Icb8911f6516eab81b9bbd567c7287be9f605e8b0
This allows setting the "inherit project ID" flags on directories; in
our case, we want to set this on the root of the lower filesystem, eg
"/data/media/0".
Bug: 146419093
Test: manual invocation works
Change-Id: Ic74588fd972d464e7021bef953da0e5aaafc4286
Use PrepareAppDirsFromRoot() to setup the quota project ID on
application-specific directories correctly. App directories use
AID_EXT_GID_START + their application ID offset, whereas cache
directories use AID_CACHE_GID_START. This is consistent with the GIDs
sdcardfs used to label these directories with.
Bug: 146419093
Test: verified project IDs with lsattr -p
Change-Id: Idca8a30d185012efb0d19ceb9b346b9a4de34f18
Normally sdcardfs takes care of setting up these directories on-demand,
for example when an app requests its private data directory to be
created. On devices without sdcardfs however, we ourselves need to make
sure to setup the UID/GID of these directories correctly.
Introduce a new PrepareAndroidDirs() function which sets the dirs up
correctly. On devices without sdcardfs, that means:
Path UID GID mode
/Android media_rw media_rw 771
/Android/data media_rw ext_data_rw 771
/Android/obb media_rw ext_obb_rw 771
Bug: 146419093
Test: wipe Android/, reboot, with and without sdcardfs, verify
contents
Change-Id: I3a879089422c7fc449b6a3e6f1c4b386b86687a4
vold historically offerred functionality to create directories on behalf
of others. This functionality was purely used to create app-specific
data/obb/media dirs. Make this more explicit by renaming the method to
indicate this.
Additionally, in the past, we never needed to care about the UID set on
these directories, because sdcardfs would take care of that for us
automatically. But with sdcardfs going away, we need to make sure the
UID of the app-specific directories is set correctly. Allow the caller
to pass this in as an argument.
Bug: 146419093
Test: atest FuseDaemonHostTest
Change-Id: Ibeb5fdc91b40d53583bc0960ee11c4d640549c34
With the newly added flag for Settings developer options, which is now
used to change the state of FUSE, PROP_FUSE now acts as the snapshot
feature flag for the current boot.
Bug: 145391093
Test: atest AdoptableHostTest
Change-Id: I22363b088e88c764294cbd61c6d94160c907fae3
The pass-through mount is used by MediaProvider to access external
storage. Previously, it was the raw filesystem (eg ext4/f2fs); the
problem with that is that the permissions on that filesystem don't allow
MediaProvider to access all the files it needs to - in particular
directories under Android/
To solve this problem, we can have the pass-through mount sit on top of
sdcardfs instead of the raw filesystem. This means we need to mount
sdcardfs even in case we're using FUSE, but we already needed to do this
anyway for other performance reasons.
Bug: 135341433
Test: atest AdoptableHostTest
Change-Id: I893d5e5076c5096d2d55212f643c9a857242e964
Up until now, the FUSE mount logic has made two assumptions:
1. The primary external volume is an emulated volume on /data/media
2. Only the primary user is running, as user zero
These assumptions are fixed by the following changes
creating an EmulatedVolume per Android user and changing the
VolumeBase id format to append the user to the id, so
s/emulated/emulated-0/. This allows us mount separate volumes per user
Some additional refactorings to re-use/clean up code.
Test: adb shell sm set-virtual-disk and partition disk operations work
even after setting up a work profile
Bug: 135341433
Change-Id: Ifabaa12368e5a591fbcdce4ee71c83ff35fdac6b
This will allow us to receive values from server flags and store them in
persist.sys.fuse without risking flag consistency during a boot.
Test: manual - flip persist.sys.fuse both ways and make sure FuseDaemon
works as expected.
Bug: 140803239
Change-Id: I839a1973c98b4eda982226d20be48d1c08e7464a
Also allow the state just before doMount() as a valid state for setting
fuse fd.
Test: manual
BUG:140173712
Change-Id: I012f8a83fef00e68f33010954fbc2ebc53cf8f1d
Since system_server cannot mount devices by itself,
add a binder interface to vold that system_server
can call to initiate this mount when required.
BUG: 135341433
Test: manual
Test: atest --test-mapping packages/providers/MediaProvider
Test: ExternalStorageHostTest DownloadProviderTests
Change-Id: If4fd02a1f1a8d921a3f96783d8c73e085c5b7ca1
We need this to stay mounted at /storage.
Bug: 124466384
Test: manual
Test: atest cts/hostsidetests/appsecurity/src/android/appsecurity/cts/ExternalStorageHostTest.java
Test: atest cts/tests/tests/provider/src/android/provider/cts/MediaStore*
Change-Id: I0cc835471ced2822d83d7056bec53d62ddc682f0
Update vold to only create package sandboxes and not do any bind mounts.
After zygote forks, all the necessary bind mounts will be setup for
the process.
Bug: 124009234
Test: manual
Test: atest cts/hostsidetests/appsecurity/src/android/appsecurity/cts/ExternalStorageHostTest.java
Test: atest DownloadProviderTests
Test: atest cts/tests/app/src/android/app/cts/DownloadManagerTest.java
Test: atest MediaProviderTests
Test: atest cts/tests/tests/provider/src/android/provider/cts/MediaStore*
Change-Id: Ia42209cb74cbc423bb09c1c51cb7a164f7c568da
Add a utility method to unmount all mountpoints
that start with a prefix.
Bug: 122905493
Test: manual
Change-Id: I11739e40e7849c1b4ca9e0b90c5c3f243691257a
Do our own fork/exec rather than using a library. This leads to
many improvements:
- unite the output recording path with the other path
- never concatenate arguments with spaces
- never use the shell
- move setexeccon after fork, so we don't need to take the lock
- general code refactor while we're there
My tests:
- Ensure Marlin device boots and vold_prepare_subdirs is called
successfully
- Try adb shell sm set-virtual-disk true, see that eg sgdisk output is
logged.
weilongping@huawei.com's tests:
- unlock a user's de and ce directory;
- connect to a OTG storage device or a sdcard and ensure the mount logic be successful
Bug: 26735063
Bug: 113796163
Test: details in commit
Change-Id: I0976413529d7cbeebf5b8649660a385f9b036f04
It can sometimes take a moment for the dm-device to appear after
creation, causing operations on it such as formatting to fail.
Ensure the device exists before create_crypto_blk_dev returns.
Test: adb sm set-virtual-disk true and format as adoptable.
Bug: 117586466
Change-Id: Id8f571b551f50fc759e78d917e4ac3080e926722
Merged-In: Id8f571b551f50fc759e78d917e4ac3080e926722
It can sometimes take a moment for the dm-device to appear after
creation, causing operations on it such as formatting to fail.
Ensure the device exists before create_crypto_blk_dev returns.
Test: adb sm set-virtual-disk true and format as adoptable.
Bug: 117586466
Change-Id: Id8f571b551f50fc759e78d917e4ac3080e926722
- Also update vold to create sandboxes for secondary storage devices.
- Since bind mounts are created in the process specific namespaces, we
don't need /mnt/storage anymore which we were using it to prevent
some bind mounts from propagating onto /mnt/runtime/write.
- Create bind mounts for {media,obb} dirs similar to data dir in
per process namespace.
- Also fix a bug where we are not passing correct packages to vold when
a new user starts.
Bug: 111890351
Test: manual
Change-Id: I7849efc4fbf3c654606fa30de7ab2de0236d766f
Helpers to get a block device size in bytes or 512 byte sectors,
using BLKGETSIZE64 and returning value of uint64_t type.
This also removes get_blkdev_size().
Test: build, manual, mount exFAT volume
Bug: 80202067
Change-Id: Ib07e8ac6ef7ff49de0ed570d1fa202e8b558b80c
shipping API version:
For devices shipped before Android P nothing changes, data
is stored under /data/system/users/<user-id>/fpdata/...
Devices shipped from now on will instead store
fingerprint data under /data/vendor_de/<user-id>/fpdata.
Support for /data/vendor_de and /data/vendor_ce has been added to vold.
Bug: 36997597
Change-Id: I615e90d1c9ab08e768a8713968fa043598a0a526
Test: manually
I want to use Utils in another executable, so breaking this link.
Bug: 25861755
Test: compiles (and boots, though that doesn't exercise changed code)
Change-Id: I6bb447453bb370fefb7f2f3aceb459428bdee6a7
Moves away from crufty char* operations to std::string utility
methods, including android::base methods for splitting/parsing.
Rewrite of how Process handles scanning procfs for filesystem
references; now uses fts(3) for more sane traversal.
Replace sscanf() with new FindValue() method, also has unit tests.
Remove some unused methods. Switch almost everyone over to using
modern logging library.
Test: cts-tradefed run commandAndExit cts-dev -m CtsOsTestCases -t android.os.storage.cts.StorageManagerTest
Test: cts-tradefed run commandAndExit cts-dev --abi armeabi-v7a -m CtsAppSecurityHostTestCases -t android.appsecurity.cts.AdoptableHostTest
Bug: 67041047
Change-Id: I70dc512f21459d1e25b187f24289002b2c7bc7af
Create IVoldListener and move most unsolicited vold events over to
this new interface. The remaining events will be routed through
method-specific listeners instead of a global one.
Move to upstream DISALLOW_COPY_AND_ASSIGN macro.
Test: cts-tradefed run commandAndExit cts-dev -m CtsAppSecurityHostTestCases -t android.appsecurity.cts.DirectBootHostTest
Test: cts-tradefed run commandAndExit cts-dev -m CtsAppSecurityHostTestCases -t android.appsecurity.cts.AdoptableHostTest
Test: cts-tradefed run commandAndExit cts-dev -m CtsOsTestCases -t android.os.storage.cts.StorageManagerTest
Bug: 13758960
Change-Id: Ib9293487db2d525a76b9b9c2e9ac18d98601c6cf
std::vector with custom zeroing allocator is used instead of
std::string for data that can contain encryption keys.
Bug: 64201177
Test: manually created a managed profile, changed it's credentials
Test: manually upgraded a phone with profile from O to MR1.
Change-Id: Ic31877049f69eba9f8ea64fd99acaaca5a01d3dd
Offer to adopt storage devices on FBE devices, but keep it guarded
behind a system property for now, since we still need to work out key
storage details.
When migrating shared storage, leave user-specific /data/media
directories in place, since they already have the needed crypto
policies defined.
Enable journaling, quotas, and encrypt options when formatting
newly adopted devices. installd already gracefully handles older
partitions without quota enabled.
Test: cts-tradefed run commandAndExit cts-dev --abi armeabi-v7a -m CtsAppSecurityHostTestCases -t android.appsecurity.cts.AdoptableHostTest
Bug: 62290006, 36757864, 29117062, 37395736
Bug: 29923055, 25861755, 30230655, 37436961
Change-Id: Ibbeb6ec9db2394a279bbac221a2b20711d65494e
Also remove some unnecessary SELinux logic when creating image files
for loop devices.
Test: builds, boots, common operations work
Bug: 34903607
Change-Id: I68dfa022ecc39f56c175e786694e0de35b954ca0
The original default /fstab.{ro.hardware} might be moved to /vendor/etc/.
or /odm/etc/. Use the new API to get the default fstab instead of using
the hard-coded /fstab.{ro.hardware}.
Bug: 35811655
Test: boot marlin with /vendor/etc/fstab.marlin
Change-Id: I92d6aefe6ff3433b7d1a671358d990bb7b1f2150
We simplified the way we track whether or not a dex file is used by
other apps. DexManger in the framework keeps track of the data and we
no longer need file markers on disk.
Test: device boots, foreign dex markers are not created anymore
Bug: 32871170
Change-Id: Id0360205b019be92049f36eab4339f4736e974f4
