platform_bootable_recovery/tests/unit/applypatch_modes_test.cpp

199 lines
6.4 KiB
C++
Raw Normal View History

/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agree to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string>
#include <vector>
#include <android-base/file.h>
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
#include <android-base/logging.h>
#include <android-base/strings.h>
#include <bsdiff/bsdiff.h>
#include <gtest/gtest.h>
#include <openssl/sha.h>
#include "applypatch/applypatch_modes.h"
#include "common/test_constants.h"
#include "otautil/paths.h"
#include "otautil/print_sha1.h"
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
#include "otautil/sysutil.h"
using namespace std::string_literals;
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
// Loads a given partition and returns a string of form "EMMC:name:size:hash".
static std::string GetEmmcTargetString(const std::string& filename,
const std::string& display_name = "") {
std::string data;
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
if (!android::base::ReadFileToString(filename, &data)) {
PLOG(ERROR) << "Failed to read " << filename;
return {};
}
uint8_t digest[SHA_DIGEST_LENGTH];
SHA1(reinterpret_cast<const uint8_t*>(data.c_str()), data.size(), digest);
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
return "EMMC:"s + (display_name.empty() ? filename : display_name) + ":" +
std::to_string(data.size()) + ":" + print_sha1(digest);
}
class ApplyPatchModesTest : public ::testing::Test {
protected:
void SetUp() override {
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
source = GetEmmcTargetString(from_testdata_base("boot.img"));
ASSERT_FALSE(source.empty());
std::string recovery_file = from_testdata_base("recovery.img");
recovery = GetEmmcTargetString(recovery_file);
ASSERT_FALSE(recovery.empty());
ASSERT_TRUE(android::base::WriteStringToFile("", patched_file_.path));
target = GetEmmcTargetString(recovery_file, patched_file_.path);
ASSERT_FALSE(target.empty());
Paths::Get().set_cache_temp_source(cache_source_.path);
}
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
std::string source;
std::string target;
std::string recovery;
private:
TemporaryFile cache_source_;
TemporaryFile patched_file_;
};
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
static int InvokeApplyPatchModes(const std::vector<std::string>& args) {
auto args_to_call = StringVectorToNullTerminatedArray(args);
return applypatch_modes(args_to_call.size() - 1, args_to_call.data());
}
static void VerifyPatchedTarget(const std::string& target) {
std::vector<std::string> pieces = android::base::Split(target, ":");
ASSERT_EQ(4, pieces.size());
ASSERT_EQ("EMMC", pieces[0]);
std::string patched_emmc = GetEmmcTargetString(pieces[1]);
ASSERT_FALSE(patched_emmc.empty());
ASSERT_EQ(target, patched_emmc);
}
TEST_F(ApplyPatchModesTest, InvalidArgs) {
// At least two args (including the filename).
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_EQ(2, InvokeApplyPatchModes({ "applypatch" }));
// Unrecognized args.
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_EQ(2, InvokeApplyPatchModes({ "applypatch", "-x" }));
}
TEST_F(ApplyPatchModesTest, PatchModeEmmcTarget) {
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
std::vector<std::string> args{
"applypatch",
"--bonus",
from_testdata_base("bonus.file"),
"--patch",
from_testdata_base("recovery-from-boot.p"),
"--target",
target,
"--source",
source,
};
ASSERT_EQ(0, InvokeApplyPatchModes(args));
VerifyPatchedTarget(target);
}
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
// Tests patching an eMMC target without a separate bonus file (i.e. recovery-from-boot patch has
// everything).
TEST_F(ApplyPatchModesTest, PatchModeEmmcTargetWithoutBonusFile) {
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
std::vector<std::string> args{
"applypatch", "--patch", from_testdata_base("recovery-from-boot-with-bonus.p"),
"--target", target, "--source",
source,
};
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_EQ(0, InvokeApplyPatchModes(args));
VerifyPatchedTarget(target);
}
// Ensures that applypatch works with a bsdiff based recovery-from-boot.p.
TEST_F(ApplyPatchModesTest, PatchModeEmmcTargetWithBsdiffPatch) {
// Generate the bsdiff patch of recovery-from-boot.p.
std::string src_content;
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_TRUE(android::base::ReadFileToString(from_testdata_base("boot.img"), &src_content));
std::string tgt_content;
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_TRUE(android::base::ReadFileToString(from_testdata_base("recovery.img"), &tgt_content));
TemporaryFile patch_file;
ASSERT_EQ(0,
bsdiff::bsdiff(reinterpret_cast<const uint8_t*>(src_content.data()), src_content.size(),
reinterpret_cast<const uint8_t*>(tgt_content.data()), tgt_content.size(),
patch_file.path, nullptr));
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
std::vector<std::string> args{
"applypatch", "--patch", patch_file.path, "--target", target, "--source", source,
};
ASSERT_EQ(0, InvokeApplyPatchModes(args));
VerifyPatchedTarget(target);
}
TEST_F(ApplyPatchModesTest, PatchModeInvalidArgs) {
// Invalid bonus file.
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
std::vector<std::string> args{
"applypatch", "--bonus", "/doesntexist", "--patch", from_testdata_base("recovery-from-boot.p"),
"--target", target, "--source", source,
};
ASSERT_NE(0, InvokeApplyPatchModes(args));
// With bonus file, but missing args.
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_NE(0,
InvokeApplyPatchModes({ "applypatch", "--bonus", from_testdata_base("bonus.file") }));
}
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
TEST_F(ApplyPatchModesTest, FlashMode) {
std::vector<std::string> args{
"applypatch", "--flash", from_testdata_base("recovery.img"), "--target", target,
};
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_EQ(0, InvokeApplyPatchModes(args));
VerifyPatchedTarget(target);
}
TEST_F(ApplyPatchModesTest, FlashModeInvalidArgs) {
std::vector<std::string> args{
"applypatch", "--bonus", from_testdata_base("bonus.file"), "--flash", source,
"--target", target,
};
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_NE(0, InvokeApplyPatchModes(args));
}
TEST_F(ApplyPatchModesTest, CheckMode) {
ASSERT_EQ(0, InvokeApplyPatchModes({ "applypatch", "--check", recovery }));
ASSERT_EQ(0, InvokeApplyPatchModes({ "applypatch", "--check", source }));
}
TEST_F(ApplyPatchModesTest, CheckModeInvalidArgs) {
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_EQ(2, InvokeApplyPatchModes({ "applypatch", "--check" }));
}
TEST_F(ApplyPatchModesTest, CheckModeNonEmmcTarget) {
ASSERT_NE(0, InvokeApplyPatchModes({ "applypatch", "--check", from_testdata_base("boot.img") }));
}
TEST_F(ApplyPatchModesTest, ShowLicenses) {
applypatch: Change applypatch command-line arguments. This applies to the standalone applypatch executable (/system/bin/applypatch on device). This executable is only used when installing (via patching or flashing) a recovery image on non-A/B device. This CL removes the support for patching non-eMMC targets from applypatch that has been deprecated as part of file-based OTA. For patching eMMC targets, it also drops the support for accepting multiple patches (not useful, since the source file must be fixed). This CL needs the matching change in the same topic, which writes the script of "/system/bin/install-recovery.sh". Note that this CL doesn't chanage the applypatch API signatures, in order to minimize the CL size. *BEFORE* usage: /system/bin/applypatch [-b <bonus-file>] <src-file> <tgt-file> <tgt-sha1> <tgt-size> [<src-sha1>:<patch> ...] or /system/bin/applypatch -c <file> [<sha1> ...] or /system/bin/applypatch -l Filenames may be of the form EMMC:<partition>:<len_1>:<sha1_1>:<len_2>:<sha1_2>:... to specify reading from or writing to an EMMC partition. *AFTER* Usage: check mode applypatch --check EMMC:<target-file>:<target-size>:<target-sha1> flash mode applypatch --flash <source-file> --target EMMC:<target-file>:<target-size>:<target-sha1> patch mode applypatch [--bonus <bonus-file>] --patch <patch-file> --target EMMC:<target-file>:<target-size>:<target-sha1> --source EMMC:<source-file>:<source-size>:<source-sha1> show license applypatch --license Bug: 110106408 Test: Run recovery_component_test and recovery_unit_test on marlin. Test: Build a non-A/B target that has /system/bin/install-recovery.sh. Verify that it installs recovery image successfully. Test: Build a non-A/B target that has /system/bin/install-recovery.sh in flashing mode. Verify that it installs recovery image successfully. Change-Id: I71f9a71fb457e6f663e0b5511946949e65b4b78c
2018-07-13 22:11:09 +02:00
ASSERT_EQ(0, InvokeApplyPatchModes({ "applypatch", "--license" }));
}