This is a stress test that instantiates multiple testcases that
interrupt a BBOTA update at every transfer command. Each testcase
asserts the last_command_file after the interruption, verifies the
update resumability, then resumes the update and asserts the updated
image.
The transfer list in the testcase covers most of the transfer commands
(stash/free/move/bsdiff/zero/new), as well as some special pattern like
having duplicate stash ids.
This CL also addresses one issue in the updater code, by resetting the
stash_map before each run. The stash map should be valid only per
block_image_verify/block_image_update run. Having leftover may cause
issue in subsequent runs, in particular when calling block_image_verify
after a previous run of block_image_{update,verify}.
Test: Run recovery_component_test on marlin.
Change-Id: I6f9a0368d194a754ce41a9c9819c6d5be2657248
Some users of minui don't need to draw texts; and we should let them
still be able to use the library without providing a font file. Also add
check for null pointers in gr_measure() and gr_font_size().
Bug: 80535212
Test: boot into recovery without a font file, and the buttons still work
Change-Id: I848e4410f2ce09ea0ab433573e6827b7e9b2c575
Currently sample app relies on onPayloadApplicationComplete
callback. It might not get invoked when app is unbound and
update is complete.
On the other hand, onStatusUpdate gets invoked always
(except when update_engine fails to init).
It's good to rely on onStatusUpdate callback to
reapply the update if it's IDLE but sample app state
is RUNNING.
- Add methods to ensure correct updater state.
- Update README.md.
BUG: 80205922
Test: on the device
Change-Id: Ic2f390e85af43556e227362321ab69f0ff146188
Signed-off-by: Zhomart Mukhamejanov <zhomart@google.com>
None of the callers actually uses the value.
(Even in the earlier versions, e.g. the one in M, the value wasn't used
either.)
Test: Run recovery_component_test on marlin.
Change-Id: I53e61a1afa211f71a200889ed3aa4046763b46ea
Allow "adb remount" on deduplicated filesystems to reboot into recovery
and run e2fsck to undo deduplication. The e2fsck binary is copied from
the system partition into tmpfs, and the system partition is unmounted
so e2fsck can run safely.
Bug: 64109868
Test: recovery with --fsck_unshare_blocks; adb remount
Change-Id: I7558749b018b58f3c4339e51a95831dbd5be1ae3
This class allows easily passing update data to
apply payload, re-applying the updata data,
and in the future persisting.
Test: on the device
Change-Id: Ie01c5f3384c421bf1180122f27811c644179e3f5
Signed-off-by: Zhomart Mukhamejanov <zhomart@google.com>
Move the commands map parsing out of PerformBlockImageUpdate(), as this
can be done more easily by the caller.
The goal (not done in this CL) is to decouple command parsing logic from
the performers. This allows (a) focusing on the command logic in the
performer; and (b) extending BBOTA commands syntax separately.
Test: Run recovery_unit_test and recovery_component_test.
Change-Id: Ife202398a7660b152d84a3ba17b90f93d19c55f2
- Add util.UpdaterStates - the state of SystemUpdaterSample.
It's different from status of UpdateEngine;
when UpdateEngine#cancel is used to suspend the update,
UpdateEngine sets status to IDLE, which cannot be used
to track the suspended state.
- UI: Change 'Update status' to 'Engine status'.
- UI: Change 'Update completion' to 'Engine error code'.
- UI: Add 'Updater state'.
Test: manually on the device
Test: using JUnit4
Change-Id: I9c58b5ed0eae3be7ab8b217fc01a621e8fb2f4bf
Signed-off-by: Zhomart Mukhamejanov <zhomart@google.com>
Otherwise tests may interfere with each other by using the same / default
location.
Test: Run recovery_component_test on marlin.
Change-Id: I6b0455489f2fdce819009964dd92bfd9bfeb06ef
The imgpatch will fail on empty deflates because the bspatch won't call
the sink function if the target length is zero.
Instead of compressing an empty string, it's cleaner to not generate such
empty deflate chunks in the patch. Therefore, we can just convert the
chunk type to raw if the target length is smaller than the patch data.
Also adjust some unit tests and add the testdata gzipped_source &
gzipped_target. These two files are ~1K each and are generated by
gzipping two slightly different regular files.
Bug: 79265132
Test: unit tests pass, imgpatch applys successfully on the given src/tgt
Change-Id: I6bfff3251918137f6762a6f9e9551642371a1124
Move the common codes into RunBlockImageUpdate(). Also clean up the
partition updated marker after running each test.
Test: Run recovery_component_test on marlin.
Change-Id: Id4302e4da4c664231b737a1e83d2e164ef58ed97
Libraries that are direct or indirect dependencies of modules installed
to recovery partition (e.g. adbd) are marked as recovery_available:
true. This allows a recovery variant of the lib is created when it is
depended by other recovery or recovery_available modules.
Bug: 79146551
Test: m -j
Change-Id: I9ca07ef53fbd89e7c86c0ba269fa52bb48d6deb4
- Add UpdateManager - responsible for the update logic.
Now ui.MainActivity is responsible for only UI.
- Create sample test for UpdateManager
- Remove MainActivityTest - now MainActivity is really simple.
- Add separate callback for progress update.
- MainActivity: UpdateEngine#bind/unbind on pause/resume.
Test: manually on the device
Test: using JUnit4
Change-Id: I1dba7c4ec74b1afb520be762413cfc261ccfbc08
Signed-off-by: Zhomart Mukhamejanov <zhomart@google.com>
Test: Build and boot into recovery on walleye. Check the long press
detection; `Run graphics test`.
Change-Id: Ic3e9b0652fc3ff6fb3ad118df5ebb9bb4abda2cd
Add the ability to change the contents of
the title lines, displayed at the top of
the screen. Once set, the same lines are
displayed for all menus until changed again.
Test: Recovery works
Bug: 78793464
Change-Id: I7ef5594b0d76dbbd2e01ad7508863af1270b2a2a
This avoids the signedness issue, and makes the code more readable.
Test: mmma bootable/recovery
Test: Run recovery_component_test.
Change-Id: I01c3a0357887cfd7c9d4aba4239ef650cfa18388
It no longer needs to be conditional, as we've removed the support for
BBOTA v1/v2.
Test: mmma bootable/recovery
Change-Id: I881de8afa38cc5b41b48e6d48d85170699ea5eb4
PayloadSpecs has complicated methods, which makes hard
to test other dependent classes.
Making it non-static allows mocking it, which makes
testing other classes easier.
Test: manually
Test: using JUnit4
Change-Id: I818dc59c6bb0e7d131439d0d41f88d5cd9a451b4
Signed-off-by: Zhomart Mukhamejanov <zhomart@google.com>
The getopt library exposes optind which is the
next index to be processed. When scanning is
restarted, optind has to be reset to 1.
Test: Recovery works
Bug: 78793464
Change-Id: I1efca3fb985ffbdfe91e43767469733cda6e7d5b
