The use case for this are go apexes which are only installed in T and
above, even though the base AOSP apexes might be installable on < T
devices.
If provided, the overridden min_sdk_version will be
1. Used as the `min_sdk_version` in the manifest file of the
top-level override apex binary
2. Used to build the transitive closure of its dependency with that
min_sdk_version, i.e. with a different apex variant.
(2) requires some special handling. At ToT, the outgoing transition
value is the base apex name (e.g. com.android.foo). Since
min_sdk_version of the overridding apex can be different than the
overridden apex, the base apex name is no longer sufficient. Instead,
transition to the name of the overriding apex com.mycompany.android.foo.
If deduping is possible, transitive deps will get deduped to
`apex_<min_sdk_version>` later.
Test: added a unit test
Test: in internal, modified min_sdk_version of com.google.android.go.art
locally, built BA and Go apexes, and used `aapt2 dump badging` to verify
that BA has minSdkVersion of 31 and Go has minSdkVersion of 33
Bug: 295311875
Change-Id: Ifbe123d1517fccbc0c058042b8a6eeb3609b6787
This replaces the global override of min_sdk_version (via
`APEX_GLOBAL_MIN_SDK_VERSION_OVERRIDE`) with an min_sdk_version override
that can be set by each individual soong override_app.
The use case for this are go apps which are only installed in T and
above, even though the base AOSP apexes might be installable on < T
devices.
Test: added a unit test
Bug: 295311875
Change-Id: Ie2e738a6786bb24417c675617f7c78358017c96c
* changes:
Refactor how jni_libs dependencies are added
Add make java.dependencyTag installable or not
APK-in-APEX should set use_embedded_native_libs: true
Install jni symlinks in Soong
Also use a different name for the output.
Bug: 341117082
Bug: 328495189
Bug: 339707888
Test: manual, TH
Change-Id: Ib98d487f57cf8b55dff61a7969139a6e199fee90
This reverts commit 0135499554.
Reason for revert: Droidmonitor triggered revert due to b/341148479 and b/341138217. Will be verifying through ABTD before submission.
Change-Id: I22e069178dfda0b1791bd77c908afff8cb87bf26
Whenever any two Rust static libraries are included
as static libraries anywhere in a CC dependency tree, we sometimes
get duplicate symbol errors. To avoid this, we no longer
directly link multiple rust static libs to CC modules.
Instead, we build rust_ffi_rlib modules and produce the actual
static library that gets linked against the CC module based on
that CC module's full list of Rust rlib dependencies.
This introduces a new static_rlibs property for cc modules to
define the rust_ffi_rlib dependencies, which are then used to
generate the module above.
This CL is intended to deprecate rust_ffi_static. It leaves
rust_ffi_static and rust_ffi static variants in place until
the remaining rust_ffi_static declarations and uses can be
removed. In the meantime, rust_ffi_static produces
rust_ffi_rlib variants as well to make the transition easier.
Bug: 254469782
Test: m # with no changes
Test: m libapexsupport # with static_rlibs
Test: m libunwindstack # with static_rlibs
Test: m netsimd # with static_rlibs, no duplicate symbols
Test: m blueprint_tests # New Soong tests
Change-Id: I47e27ac967ef0cad46d398ebf59d8275929ae28a
Refactor transformSrctoCrate and the functions it calls to not rely
on rust.ModuleContext, preparing it to be callable from soong-cc
context to build a Rust staticlib.
This also refactors out common default flags used when building
libraries, again to prepare for building a Rust staticlib from
a soong-cc context.
Bug: 254469782
Test: m blueprint_tests && m
Change-Id: I678f6fee989c61bb15c340b9887e4d1934991907
This CL brings three changes in how jni_libs are depended on.
1. SDK variants of the jni_libs are depended on only when they can be
embedded. This is because SDK variants are not installable.
Previously, app could depend on SDK variants without embedding them, but
this didn't cause a problem because the installation of the jni libs was
done in Make. However, as it's done in Soong, we need to depend on a
correct variant.
2. Non-SDK variants of the jni_libs are now tagged with jniInstallTag.
This automatically installs the libraries along with the app. The
installation of the jni libs is no longer done in app.
3. checking of the sdk version of the jni libs is done only when they
are embedded. Doing the check even when the libs are not embedded
triggers a lot of false alarms. Note that with #1, many platform apps
have started depending on non-SDK variants.
Bug: 330276359
Test: m
Change-Id: I1bc9ceb8f79b102caeb23476c3fb03989e184a91
java.dependencyTag now has a new field installable which contols whether
the dependency should be added as the install dep of the app or not.
This allows us to model all the dependency tags for Java using the same
struct.
Bug: N/A
Test: m
Change-Id: I9b1c7809a0bde3f15579aefd9bb34d828764b84b
So far, we automatically have embedded JNI libs for APKs in APEX, even
if use_embedded_native_libs was not set or set to false.
With this change, such APKs should explicitly set the property.
This is in preparation for an upcoming change for using different
dependency tags to JNI deps depending on whether they are embedded (thus
no install is needed), or not (thus installation to the partition is
needed).
shouldEmbedJni function now doesn't make use of the ApexInfoProvider
which is not available during deps mutator.
Bug: N/A
Test: m
Change-Id: I836171aacba19dbfa0e09f16a773ae498c56d60b
The installation of the symlink
(<partition>/app/MyApp/lib/<arch>/libfoo.so) and its target
(/system/lib64/libfoo.so) are now done int Soong.
I gave up the idea of always embedding jni libs to apps, due to a
hard-to-fix regression in storage usage. Specifically, consider this
case.
app --(jni_lib)--> libfoo
--(jni_lib)--> libbar
libfoo --(shared_lib)--> libbar
Ideally, with the embedding idea, both libfoo and libbar should be
embedded into the app and there should be no libfoo or libbar outside of
the apk, unless there's no dependency to any of them from outside of the
apk.
However, the previous implementation installed libbar to /system/lib64,
leading two copies of the lib; one in /system/lib64, the other in the
apk.
This was happening because libbar was also considered as a transitive
dep of libfoo, and therefore a dependency to its installation path is
added to the apk. The problem here is that the app doesn't know that
libfoo depends on libbar. We in theory can write a very delicate
dependency traverse routine which filters libbar out of the transitive
deps, but that looked too complicated.
Bug: 339923078
Bug: 330276359
Test: Build and watch any bloatbuster warning
Test: m aosp_cf_system_x86_64
The following three files are found
* system/lib64/libnfc_nci_jni.so
* system/etc/libnfc-nci.conf
* system/priv-app/NfcNci/lib/arm64/libnfc_nci_jni.so
Change-Id: I0930cb1ebb8ca8a6efd64b1ce2cdfd1c47fe19ef
With this change, the deps property in filesystem modules gather the
first target of the filesystem module only.
To gather dependencies across both targets, use multilib.both.deps
instead.
Bug: N/A
Test: go test ./...
Change-Id: Ie2ff0c48f08c61c8b219fc2c1540476ff8e4b1fc
In Android 11 or higher, you can use OverlayConfig
to configure the mutability, default state, and priority
of overlays.
To configure an overlay, you need to create a config.xml
in partition/overlay/config/. Since there is no module type
in soong to install prebuilt artifacts on that location
(like prebuilt_etc for example) we need to manually create
and move that file using Make duing the build process.
This commit adds support to instead create that file
using soong. Then we can instead do something along the
lines of:
prebuilt_overlay {
name: "test-overlay",
src: ":generate-test-overlay",
sub_dir: "config",
filename: "config.xml",
product_specific: true,
}
which would create a config.xml file at the overlay/
directory of the partion in which the overlay is configured,
product/ in this example.
Test: cd build/soong/etc ; go test -run \
TestPrebuiltOverlayInstallDirPath
Bug: 340833016
Change-Id: Iaecae7784683fb9c4306a6834b3ee705c9c20806
During trunk stable development, it is possible that a new boot jar is
added to the source apex, but not available in prebuilt apex yet.
Thefore we need to conditionally check the `contents` of the respective
bootclasspath_fragment modules. https://r.android.com/2822393 did this
using isActiveModule. This function relies on soong config namespaces to
"hide" the source bootclasspath_fragment module when
<module>.source_build is false.
Soong config namespaces for mainline source vs prebuilt selection is no
longer in use, so this CL replaces `isActiveModule`. The CL cleaves the
implementation
1. For source builds, the check will run in the context of the
bootclasspath_fragment module. `disableSourceApexVariant` will be
used to skip the check if prebuilts are selected.
2. For prebuilt builds, the prebuilt bootclasspath_fragment module sets
a provider, and the top-level apex will do the check.
(2) is necessary to handle the edge case of multiple versioned mainline
prebuilts and possible skew in apex boot jars across them. In case of
prebuilt builds, the unselected mainline prebuilts will have
HideFromMake called on them, so the check will only run on the apex that
is actually used during the build.
Bug: 328578801
Test: go test ./apex
Change-Id: I6eec603397eea926f3a481b79ca938245064d809
Merged-In: I6eec603397eea926f3a481b79ca938245064d809
After aosp/3089654, Android.mk files will be able to read
EXTRA_INSTALL_ZIPS, which we don't want. Use the new
$(KATI_visibility_prefix) to restrict its usage.
Test: m nothing passes, adding $(warning $(EXTRA_INSTALL_ZIPS)) in build/make/core/main.mk produces an error
Change-Id: Ib3c0079efd534e580a176fc69f746852b66297af
Replace the performOverrideMutator with a TransitionMutator.
This relands I358f260f1bcd894d7803036ce77ba666c0429355, which was
reverted due to a subtle behavior change when converting AliasVariation
into an IncomingTransition. AliasVariation is temporary, losing its
effect after the next call to CreateVariations that doesn't also call
AliasVariation. dexpreopt_bootjar.go was checking if a variant existed
after the apex mutator had run and obsoleted the alias created by the
perform_override mutator. When the alias was replaced by
IncomingTransition it wasn't obsoleted and dexpreopt_bootjar.go found
extra dependencies. The extra dependencies were picked up by the
core licensing code walking dependencies, and caused a significant
increase to the size of system/etc/NOTICE.xml.gz.
ag/27324277 removed flags that triggered the extra dependencies,
which prevents the system/etc/NOTICE.xml.gz increase for now.
b/340911730 tracks avoiding the unnecessary dependencies if the
flags are re-enabled.
Bug: 319288033
Flag: NONE
Test: all soong tests pass
Test: no change to build.ninja
Change-Id: I46171ba69f24482414a20d63a131941a162f025c
Currently, you can't have two prebuilt_etcs in one apex with the same
file name, because apexes emit make modules for all the files in the
apex, and the module name for the prebuilt_etc's make representation
is based on the base filename of the installed file. We can change it to
be qualified based on the full relative path of the outputfile so that
you don't hit the conflicts as much.
Fixes: 340207931
Test: Presubmits
Change-Id: I7836fd4661fcaafd91901eba7e0b89506946c3e2
This reverts commit d94cccc523.
Reason for revert: Patchset 2 was wrong, doesn't actually fix the bug
Change-Id: Ie2d931ad3e2277ce1923284b13f50f62ac2f8917
If a map was included twice, we had side effects when skipping the extra
inclusion.
Bug: 340659219
Test: manual, TH
Change-Id: I90c55a800ecad932f8f67cf6f9f60dba571f7c48
Trying to clean up cruft from envsetup.sh
Shell functions require re-sourcing envsetup.sh, and should be avoided
if possible.
Bug: 340648588
Test: try the scripts
Change-Id: I15ec39b0382d9dd60e290dae633e8730a8d18131
Currently, you can't have two prebuilt_etcs in one apex with the same
file name, because apexes emit make modules for all the files in the
apex, and the module name for the prebuilt_etc's make representation
is based on the base filename of the installed file. We can change it to
be qualified based on the full relative path of the outputfile so that
you don't hit the conflicts as much.
Bug: 340207931
Test: Presubmits
Change-Id: I6708d89c755c31c17cce112fb08a810e51926c76
* changes:
Revert "Revert^2 "Always embed jni libs and store uncompressed""
Revert "Revert "Revert "Collect transitve deps of jni libs only for bund...""
Revert "Add SkipToTransitiveDepsTag interface for dependency tags"
Revert "Install transitive deps of jni libs, but not the jni libs themselves"
Only add a repository to the trace when it actually specifies
aconfig_value_sets.
Also default to only generating the release config .mk file for the
current TARGET_RELEASE (rather than all), to reduce kati reruns.
Bug: 340126861
Test: manual, TH
Change-Id: I671d4b5f57c9bdd252d98e048f16aa9c7b3b2ffa
