With -Wsign-compare, compilers warn about a mismatching signedness
in a comparison in fdt_splice_().
Since we just established that oldlen is not negative, we can safely
cast it to an unsigned type.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20200921165303.9115-8-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about a mismatching signedness in
comparisons in fdt_get_string().
In the first two cases, we have just established that the signed values
are not negative, so it's safe to cast the values to an unsigned type.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20200921165303.9115-7-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about a mismatching signedness
in a comparison in fdt_grab_space_().
All the involved values cannot be negative, so let's switch the types of
the local variables to unsigned to make the compiler happy.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20200921165303.9115-4-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about a mismatching signedness
in comparisons in fdt_mem_rsv().
Since all involved values must be positive, change the used types to be
unsigned.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20200921165303.9115-3-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With -Wsign-compare, compilers warn about mismatching signedness in
comparisons in fdt_offset_ptr().
This mostly stems from "offset" being passed in as a signed integer,
even though the function would not really tolerate negative values.
Short of changing the prototype, check that offset is not negative, and
use an unsigned type internally.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Message-Id: <20200921165303.9115-2-andre.przywara@arm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fdt_check_node_offset_() checks for a valid offset but also changes the
offset by calling fdt_next_tag(). Hence, do not skip this function if
ASSUME_VALID_INPUT is set but only omit the initial offset check in that
case.
As this function works very similar to fdt_check_prop_offset_(), do the
offset check there as well depending on ASSUME_VALID_INPUT.
Message-Id: <1913141.TlUzK5foHS@noys4>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fdt_check_header assumes that its argument points to a complete header
and can read data beyond the FDT_V1_SIZE bytes which fdt_check_full
can provide.
fdt_header_size can safely return a header size with FDT_V1_SIZE bytes
available and will return a usable value even for a corrupted header.
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Message-Id: <20200709041451.338548-1-patrick.oppenlander@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Message-Id: <20200616011217.15253-1-patrick.oppenlander@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
Message-Id: <20200618042117.131731-1-patrick.oppenlander@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This condition uses bitwise OR but should be logical OR. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20200615160033.87328-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
libfdt: fix undefined behaviour in fdt_splice_()
Along the lines of commit d0b3ab0a0f ("libfdt: Fix undefined behaviour
in fdt_offset_ptr()"), fdt_splice_() similarly may not use pointer
arithmetic to do overflow checks. (The left side of the checks added by
d4c7c25c9e ["libfdt: check for potential overrun in _fdt_splice()"]
doesn't really lend itself to similar replacement though.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Message-Id: <f2d09e81-7cb8-c5cc-9699-1ac05b0626ff@suse.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This error indicates a logic bug in the code calling libfdt, so VALID_DTB
is not really the right check. Update it to use VALID_INPUT instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200302190255.51426-4-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If libfdt returns -FDT_ERR_INTERNAL that generally indicates a bug in the
library. Add a new assumption for these cases since it should be save to
disable these checks regardless of the input.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200302190255.51426-3-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a little more detail in a few of these comments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200302190255.51426-2-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix 'saftey' and 'additional' typos noticed in the assumption series.
Reword the ASSUME_NO_ROLLBACK slightly to improve clarity.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200302190255.51426-1-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function is used to perform a full check of the device tree. Allow
it to be excluded if all assumptions are enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200220214557.176528-9-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a way to remove this check and the reordering code, which is
unnecessary if the dtb is known to be correctly ordered.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200220214557.176528-8-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow enabling FDT_ASSUME_LATEST to disable version checks.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200220214557.176528-7-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow enabling FDT_ASSUME_NO_ROLLBACK to disable rolling back after a
failed operation.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200220214557.176528-6-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow enabling ASSUME_VALID_INPUT to disable sanity checks on the device
tree and the parameters to libfdt. This assumption covers that cases where
the problem could be with either.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20200220214557.176528-5-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support ASSUME_VALID_DTB to disable some sanity checks
If we assume that the DTB itself is valid then we can skip some checks and
save code space. Add various conditions to handle this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20200220214557.176528-4-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add a new ASSUME_MASK option, which allows for some control over the
checks used in libfdt. With all assumptions enabled, libfdt assumes that
the input data and parameters are all correct and that internal errors
cannot happen.
By default no assumptions are made and all checks are enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20200220214557.176528-3-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There does not seem to be a strong reason to inline this function. Also
we are about to add some extra code to it which will increase its size.
Move it into fdt.c and use a simple declaration in libfdt.h
Signed-off-by: Simon Glass <sjg@chromium.org>
Message-Id: <20200220214557.176528-2-sjg@chromium.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The overlay path ends with trailing zero. When adding this path
as property value, this character should be removed. This is the case
when the overlay adds a node with an alias.
Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Message-Id: <20191111080444.9819-2-stefan@olimex.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function returns an int32_t, however the prototype in
libfdt_internal.h shows it returning an int. We haven't caught this before
because they're the same type on nearly all platforms this gets built on.
Apparently it's not the case on FreeRTOS, so someone hit this mismatch
building for that platform.
Reported-by: dharani kumar <dharanikumarsrvn@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Including libfdt.h in a C++ project fails during compilation with recent
version of GCC or Clang.
This simple example:
extern "C" {
#include <libfdt.h>
}
int main(void) { return 0; }
leads to the following errors with GCC 9.1.0:
/usr/include/libfdt.h: In function ‘void fdt32_st(void*, uint32_t)’:
/usr/include/libfdt.h:139:16: error: invalid conversion from ‘void*’ to ‘uint8_t*’ {aka ‘unsigned char*’} [-fpermissive]
139 | uint8_t *bp = property;
| ^~~~~~~~
| |
| void*
/usr/include/libfdt.h: In function ‘void fdt64_st(void*, uint64_t)’:
/usr/include/libfdt.h:163:16: error: invalid conversion from ‘void*’ to ‘uint8_t*’ {aka ‘unsigned char*’} [-fpermissive]
163 | uint8_t *bp = property;
| ^~~~~~~~
| |
| void*
This commit adds an explicit cast to uint8_t* to fix this issue.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Message-Id: <20190910104824.1321594-1-luc.michel@greensocs.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
c12b2b0c20 "libfdt: fdt_address_cells() and fdt_size_cells()" introduced
a bug as it consolidated code between the helpers for getting
#address-cells and #size-cells. Specifically #size-cells is allowed to
be 0, and is frequently found so in practice for /cpus. IEEE1275 only
requires implementations to handle 1..4 for #address-cells, although one
could make a case for #address-cells == #size-cells == 0 being used to
represent a bridge with a single port.
While we're there, it's not totally obvious that the existing implicit
cast of a u32 to int will give the correct results according to strict C,
although it does work in practice. Straighten that up to cast only after
we've made our range checks.
Reported-by: yonghuhaige via https://github.com/dgibson/dtc/issues/28
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In libfdt we often sanity test fdt_totalsize(fdt) fairly early, then
trust it (but *only* that header field) for the remainder of our work.
However, Coverity gets confused by this - it sees the byteswap in
fdt32_ld() and assumes that means it is coming from an untrusted source
everytime, resulting in many tainted data warnings.
Most of these end up with logic in fdt_get_string() as the unsafe
destination for this tainted data, so let's tweak the logic there to make
it clearer to Coverity that this is ok.
We add a sanity test on fdt_totalsize() to fdt_probe_ro_(). Because the
interface allows bare ints to be used for offsets, we already have the
assumption that totalsize must be 31-bits or less (2GiB would be a
ludicrously large fdt). This makes this more explicit.
We also make fdt_probe_ro() return the size for convenience, and change the
logic in fdt_get_string() to keep it in a local so that Coverity can see
that it has already been bounds-checked.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Symbols from overlays are merged into the target tree, and are required to
have the form:
/fragment@XXX/__overlay__/...
If any symbols don't have this form, the overlay is rejected.
But there's not really anything wrong with an overlay having "local"
labels referring to a fragment node or some other metadata, that's not
expected to end up in a target tree.
So change our overlay application to simply ignore such symbols rather than
fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When applying overlays, we merge symbols from the overlay into the target
tree. At the moment the logic for this assumes all symbols in the overlay
are attached to a node of the form:
/fragment@XXX/__overlay__/relative/path
And will end up applied to the relative/path node under the fragment's
target.
However, this disallows the case of a symbol in the form just:
/fragment@XXX/__overlay__
This does have a pretty obvious sensible meaning: attach the new symbol
directly to the fragment's target, but we don't currently do that.
It's pretty easy to workaround this limitation in one's overlays, but it's
also easy to handle in the overlay applying code, so we might as well
extend it to cover this case.
Reported-by: Christophe Braillon
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A couple of libfdt files are missing licenses. Add (GPL-2.0-or-later OR
BSD-2-Clause) SPDX tag to them.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-6-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Replace instances of dual GPLv2 or BSD license boilerplate with SPDX tags.
Signed-off-by: Rob Herring <robh@kernel.org>
Message-Id: <20190620211944.9378-3-robh@kernel.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The typos have been discovered with the "codespell" utility.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190520081209.20415-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Searching for duplicate names scales O(n^2) with the number of names
added to a fdt, which can cause a noticable slowdown with larger device
trees and very slow CPU cores.
Add FDT_CREATE_FLAG_NO_NAME_DEDUP that allow the caller to trade fdt size
for speed in the creation process.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-4-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is a need to be able to specify some options when building an FDT
with the SW interface. This can be accomplished with minimal changes by
storing intermediate data in the fdt header itself, in fields that are
not otherwise needed during the creation process and can be set by
fdt_finish().
The fdt.magic field is already used exactly this way, as a state to
check with callers that the FDT has been created but not yet finished.
fdt.version and fdt.last_comp_version are used to make room for more
intermediate state. These are adjacent and unused during the building
process. last_comp_version is not yet used for intermediate state, but
it is zeroed and treated as used, so as to allow future growth easily.
A new interface, fdt_create_with_flags() is added, which takes 32-bit
flag value to control creation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-3-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If fdt_add_property or fdt_property_placeholder fail after allocating
a string for the name, they return without freeing that string. This
does not change the structure of the tree, but in very specific cases
it could lead to undesirable space consumption.
Fix this by rolling back the string allocation in this situation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20190509094122.834-2-npiggin@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the libfdt based tools (fdtput, fdtget, etc.) and all the
test binaries using libfdt are linked against the static version of libfdt.
That's made it very easy in the past to forget to properly update the
version.lds file which is needed to make functions publicaly accessible
from the shared library.
To avoid problems like that in future, alter the build so that we link and
run the tests against the shared library version of libfdt.
That immediately points out several important symbols that are still
missing from the version.lds, so fix those as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It's now a trivial wrapper around fdt_find_max_phandle() so we might as
well inline it. We also remove it from the versioning linker script.
Theoretically, that's a breaking ABI change except that we haven't yet
released a version with it exposed in the shared object, so we can get
away with it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new fdt_generate_phandle() function can be used to generate a new,
unused phandle given a specific device tree blob. The implementation is
somewhat naive in that it simply walks the entire device tree to find
the highest phandle value and then returns a phandle value one higher
than that. A more clever implementation might try to find holes in the
current set of phandle values and fill them. But this implementation is
relatively simple and works reliably.
Also add a test that validates that phandles generated by this new API
are indeed unique.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190326153302.17109-3-thierry.reding@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Use the fdt_find_max_phandle() function instead of the deprecated
fdt_get_max_phandle() function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190326153302.17109-2-thierry.reding@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The fdt_get_max_phandle() function has some shortcomings. On one hand
it returns just a uint32_t which means to check for the "negative"
error code a caller has to explicitly check against the error code
(uint32_t)-1. In addition, the -1 is the only error code that can be
returned, so a caller cannot tell the difference between the various
failures.
Fix this by adding a new fdt_find_max_phandle() function that returns an
error code on failure and 0 on success, just like other APIs, and stores
the maximum phandle value in an output argument on success.
This also refactors fdt_get_max_phandle() to use the new function. Add a
note pointing out that the new fdt_find_max_phandle() function should be
preferred over fdt_get_max_phandle().
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190326153302.17109-1-thierry.reding@gmail.com>
[dwg: Reword for some inaccuracies in the commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This function will append an address range property using parent node's
"#address-cells" and "#size-cells" properties.
It will be used in implementing kdump with kexec_file_load system call
at linux kernel for arm64 once it is merged into kernel tree.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Message-Id: <20190327061552.17170-2-takahiro.akashi@linaro.org>
[dwg: Correct a SEGV error in the testcase]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Yet again, we've added several functions to libfdt that were supposed
to be exported, but forgotten to add them to the versio.lds script.
This adds them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The new fdt_generate_phandle() function can be used to generate a new,
unused phandle given a specific device tree blob. The implementation is
somewhat naive in that it simply walks the entire device tree to find
the highest phandle value and then returns a phandle value one higher
than that. A more clever implementation might try to find holes in the
current set of phandle values and fill them. But this implementation is
relatively simple and works reliably.
Also add a test that validates that phandles generated by this new API
are indeed unique.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Message-Id: <20190320151003.28941-1-thierry.reding@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The actual error is FDT_ERR_NOTFOUND, not FDT_ERR_NOT_FOUND.
Fixes: d29126c90a ("libfdt: Add iterator over properties")
Fixes: 902d0f0953 ("libfdt: Add a subnodes iterator macro")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The second parameter of fdt_getprop_by_offset() is called "offset", not
"ffset".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dtc makefiles have support for building into a separate directory from
the sources... except that it's broken and probably always has been.
Remove the pretense.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move it to the libfdt Makefile piece, use neater make syntax, and remove
redundant command (already included in STD_CLEANFILES).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
6dcb8ba4 "libfdt: Add helpers for accessing unaligned words" introduced
the fdt32_ld() and fdt64_ld() helpers for loading values from the FDT blob
which might not be naturally aligned. This matters for ARM, where
attempting a plain unaligned load will often cause an exception.
However, it seems the memcpy() we used here was surprisingly expensive,
making libfdt nearly 6x slower on at least some ARM platforms.
This patch takes an alternative approach, using a bunch of 1-byte loads
and shifts to implement the helpers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
