Providing non-dds exemption for HAL 1.2 network scan due to some devices
only perform network scan on preferred data sim. Since logical modem
id(0/1) and physical sim slot id(0/1) are intuitively aligned. Set
first sim as dds sim, and skip the network scan on the second one
(non-dds).
Test: Vts
Bug: 135243177
Change-Id: I58b89473714dc6d3ce6567ba1809baad6cd6d799
Network scan tests with parameters are disabled because of vendors
failed to fully implement startNetworkScan in HAL 1.4, and GSM rat scan
with parameters will get REQUEST_NOT_SUPPORTED error from modem.
Test: VTS
Bug: 137298570
Change-Id: I99df8495c5f654cb1420b7da36d7f5128ce14dbc
Change stopNetworkScan from 1_1 to 1_2 when testing VtsHalRadioV1_2Target.
Symptom:
When vts process slot2 "startnetworkscan", it will call "stopnetworkscan()" when startnetworkscan
success. But from current design it will set stopnetworkscan to slot1(wrong slot, expect is slot2)
as bwlow log.
CTS fail log:
hardware/interfaces/radio/1.2/vts/functional/radio_hidl_hal_test.cpp:111
//Device request NwScan on 2nd Sim
06-28 11:30:22.770 radio 873 1213 F RILQ : RIL[1][Log.cpp: 48] [DispatcherModul(873,1213)]
d: [DispatcherModule]: Handling msg = RIL_REQUEST_START_NETWORK_SCAN
//But Device want to abort on Primary Sim
06-28 11:30:22.776 radio 923 1205 F RILQ : RIL[0][Log.cpp: 48] [DispatcherModul(923,1205)]
d: [NasModule]: Handling msg = RIL_REQUEST_STOP_NETWORK_SCAN[Context: IRadio(1681692777)]
Bug: 135982495
Test: Build pass. Local test VTS pass.
Change-Id: Ic53c24ab2a670e806b4ac7f192e6eb81252ade84
(cherry picked from commit 5cef297cb2)
The whole test case run emergencyDial.RadioHidlTest_v1_4 first and then
come after startNetworkScan.RadioHidlTest_v1_4 test case immediately
(within ~3 secs) the NWscan failure is device in emergency call in
progress/connected while doing emergencyDial.RadioHidlTest_v1_4 test
Although emergencyDial.RadioHidlTest_v1_4 only care about command/response
is successful or not and don't care call is established or not, modem do
care about call condition is in idle/progress/connected state before it
can do NWscan
When there's dedicated channel established, modem can not perform AP
request NWscan in parallel as we are single HW modem restriction.
Test: run vts
Bug: 135595082
Change-Id: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
Merged-In: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
(cherry picked from commit 07a53471c4)
The whole test case run emergencyDial.RadioHidlTest_v1_4 first and then
come after startNetworkScan.RadioHidlTest_v1_4 test case immediately
(within ~3 secs) the NWscan failure is device in emergency call in
progress/connected while doing emergencyDial.RadioHidlTest_v1_4 test
Although emergencyDial.RadioHidlTest_v1_4 only care about command/response
is successful or not and don't care call is established or not, modem do
care about call condition is in idle/progress/connected state before it
can do NWscan
When there's dedicated channel established, modem can not perform AP
request NWscan in parallel as we are single HW modem restriction.
Test: run vts
Bug: 135595082
Change-Id: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
Merged-In: Iecba54b93b96d33b57bc59e00f082ff133d2e57b
For some vendors do not supports independent radios, if
there is one manual search ongoing, another manual search
on other SIM is not supported. So sending stop network scan
request once trigger network scan completed to exclude this
modem limitation.
Bug: 135005200
Test: atest RadioHidlTest_v1_2#startNetworkScan
Change-Id: Iacfd59ac2ad4d44e763ee03697c1f8f57162ce38
This vts enforce IRadioConfig is existed when IRadio service is supported.
We didn't add IRadioConfigV1.2, so in this test IRadioConfigV1.1 will be
checked.
Bug: 132379735
Test: atest VtsHalRadioV1_4TargetTest
Change-Id: I2062ed6b191193d9a8af4f25059fed6cc8dc09d8
Currently tests that check for incremental scan interval
range-checking have incremental scans disabled.
This CL turns on incremental scans for tests where the
invalid interval range checks are being validated.
Bug: 112486807
Test: atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity1;
atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity2;
Merged-In: I94874f538d2df70a72913b489d9298f8d1cf9b56
Change-Id: I94874f538d2df70a72913b489d9298f8d1cf9b56
(cherry picked from commit f56b9a41dd)
When incremental results are disabled for network scans,
update the API documentation to allow implementations to
ignore range checking for the incremental scan interval.
Bug: 112486807
Test: compilation - docstring-only change
Merged-In: I901335550b4b8c2cf75f91b39fd031f03ffae982
Change-Id: I901335550b4b8c2cf75f91b39fd031f03ffae982
(cherry picked from commit 944efca78d)
Currently tests that check for incremental scan interval
range-checking have incremental scans disabled.
This CL turns on incremental scans for tests where the
invalid interval range checks are being validated.
Bug: 112486807
Test: atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity1;
atest RadioHidlTest_v1_2#startNetworkScan_InvalidPeriodicity2;
Change-Id: I94874f538d2df70a72913b489d9298f8d1cf9b56
When incremental results are disabled for network scans,
update the API documentation to allow implementations to
ignore range checking for the incremental scan interval.
Bug: 112486807
Test: compilation - docstring-only change
Change-Id: I901335550b4b8c2cf75f91b39fd031f03ffae982
Change the network scan tests to use the P900 and 850
GSM bands, which are commonly (nearly universally) supported
bands.
Bug: 132076611
Test: atest RadioHidlTest_v1_2
Merged-In: Ia682f022d35c481876c49c9c8802d7c39722be0e
Change-Id: Ia682f022d35c481876c49c9c8802d7c39722be0e
(cherry picked from commit 2ea2a64bc7)
Change the network scan tests to use the P900 and 850
GSM bands, which are commonly (nearly universally) supported
bands.
Bug: 132076611
Test: atest RadioHidlTest_v1_2
Change-Id: Ia682f022d35c481876c49c9c8802d7c39722be0e
Change the network scan tests to use the P900 and 850
GSM bands, which are commonly (nearly universally) supported
bands.
Bug: 132076611
Test: atest RadioHidlTest_v1_2
Change-Id: Icb4dc47360a5753b9697f74aec19045155ee27fc
Since the system API for the hal is not implemented in Q, we disable the
vts test. Adding corresponding comments on the test.
Bug: 130254624
Test: Build
Change-Id: I777961aeaf8fb2baa28cee47cf3df4015a6ee0f0
hidl-generated makefiles are now generated such that bpfmt(file) == file.
Bug: 67417008
Test: enable bpfmt hook
Change-Id: I1f69d292bc23a7cc293a66110cb02d597e1019ad
Added cuttlefish support for setDataProfile and
setInitialAttachApn v1.4 support
Test: vts-tradefed run vts -m VtsHalRadioV1_4Target
Bug: 121345833
Change-Id: Ie6acc8756f93ae16963cf9e05e0cf94d9039cb10
Introduction of VTS test cases for setAllowedCarriers_1_4 and
getAllowedCarriers_1_4.
Bug: 124015822
Test: compilation, VTS execution on cuttlefish
Change-Id: Ie1e737d413e6d3559d7a52170bff197eb709c7ca
Modify the document for 'hasKnownUserIntentEmergency'.
In the scenarios that the 'address' in the 'dialInfo' field has other
functions besides the emergency number function, if the
'hasKnownUserIntentEmergency' field is true, the user's intent for this
dial request is emergency call, and the modem must treat this as an
actual emergency dial; if the 'hasKnownUserIntentEmergency' field is
false, Android does not know user's intent for this call.
Test: compile
Bug: 121345950
Change-Id: I3457e7519be564ac5043e06380e9450a1b12425f
(cherry picked from commit 7208840ec0148ad5a01bdf419170282cd1b32437)
Add the NR Cell Identity field to the NrCellIdentity
struct.
Bug: 124126359
Test: compilation on goog/master; VTS currently infeasible
pending other changes.
Change-Id: Ie7082a7dc1737cb613ab178e86016fa0d09c24d3
When fields are inapplicable, they should not
be set to a clearly out-of-range value to signal
to the framework that those fields are not used.
In some cases, there is an in-range invalid value
that has been defined by the standards. The docs
are inconsistent in calling out INT_MAX as the
value to be used when something is inapplicable
vs the case when a measurement is simply not
reported. In all cases, INT_MAX can be used to
denote an invalid value, and in cases where the
field/structure is inapplicable, it is the correct
value. This CL updates all the docstrings for
SignalStrength-related fields to clarify that
INT_MAX is the correct "invalid" value for cases
when fields are inapplicable.
Bug: 123088652
Test: compilation (docstring-only change); CTS
naturally enforces this change on devices with
newer HALs; backwards compatibility is preserved
for existing HAL versions.
Change-Id: I5cfa917f504d15691ab3f2c298189bdd47794a42
New tests would be added in cpp files under functional folder. Add a new
folder since it doesn't exist for 1.4 yet.
Test: Compilation
Change-Id: Ieac30bbbc865b76a08d4bdd655f0d489bb7f77bd
Bug: 73784494
The new parameter is to indicate if the request is initiated
by the user through an emergency dialer or shortcut, meaning
that the request is explicitly an emergency dial request.
This is to indicate to the modem that no disambiguation (regarding
whether this is really an emergency request) should
be done for this request.
Test: builds fine
Bug: 123101600
Merged-in: Ic830762d8a8319f494f22d875ca6adad91ffce3b
Change-Id: Ic830762d8a8319f494f22d875ca6adad91ffce3b
(cherry picked from commit 143d32860f)
If 'isTesting' is true, this request is for testing purpose,
and must not be sent to a real emergency service; otherwise it's
a real emergency call request.
Bug: 122840137
Test: Treehugger (VTS later)
Merged-in: I9607967b2a362f72e9d2bcda4ef25afaf0cc7f1d
Change-Id: I9607967b2a362f72e9d2bcda4ef25afaf0cc7f1d
(cherry picked from commit 527d650656)
The new parameter is to indicate if the request is initiated
by the user through an emergency dialer or shortcut, meaning
that the request is explicitly an emergency dial request.
This is to indicate to the modem that no disambiguation (regarding
whether this is really an emergency request) should
be done for this request.
Test: builds fine
Bug: 123101600
Change-Id: Ic830762d8a8319f494f22d875ca6adad91ffce3b
Clean up some unneeded/confusing error codes in the 1.4 Radio HAL.
Quoting description from aosp/616923:
-Remove SYSTEM_ERROR. This is an ultra-generic error
that also provides no meaningful distinction from
INTERNAL_ERROR but is even less specified in scope.
-Remove NO_MEMORY. This is very implementation
specific, and should be essentially impossible to
hit in the generic sense. Today we don't have a
generic EBUSY error code, which this would map to.
Since it should be essentially impossible to hit,
the preference is to assert that it shouldn't be.
If an implementation really has memory pressure
then it can return INTERNAL_ERROR, of which this
is a class. INTERNAL_ERROR will be treated as a
temporary failure anyway, making NO_MEMORY a
distinction without a difference.
-Remove CANCELLED. We have no way to cancel an API
call. If a persistent/ongoing request is cancelled
by the caller using a separate API request, then
that's a success case rather than an error case.
Bug: 73174777
Change-Id: I5bf268f86ed52e7294f7127f24beba04c9159fea
Test: Compilation
Many of error causes reason are using very esoteric
abbreviations and acronyms. Refine description for making more
clear to the developer.
Bug: 113505704
Test: Build pass and data call can setup normally.
Change-Id: Ifb9c256eef8354add46c76c322cd6a3bd126bd44
Add support for dual SIM to carrier restrictions.
Add support to exclude specific carriers in the list of carrier
restrictions.
Bug: 120313541
Test: Created test application to verify correct functionality.
Change-Id: Ib05267fda5f2fd0b8821a5812fcf47d460e60a2b
Merged-In: Ib05267fda5f2fd0b8821a5812fcf47d460e60a2b
setModemsConfig and getModemsConfig APIs will allow the framework
to set the number of live modems to switch to single/multi sim state
Bug: 122073700
Test: vts
Change-Id: Ib200ffa5f2aebe21caf2b761407c79828730e6f1
Merged-In: Ib200ffa5f2aebe21caf2b761407c79828730e6f1
setModemsConfig and getModemsConfig APIs will allow the framework
to set the number of live modems to switch to single/multi sim state
Bug: 122073700
Test: vts
Change-Id: Ib200ffa5f2aebe21caf2b761407c79828730e6f1
