Versioned library names, versioned include paths, and others.
Test: make VtsHalGraphicsComposerV2_1TargetTest
Change-Id: Ic266763c9ef25e09bc2c97026f2e1324609f48c6
Move libVtsHalGraphicsComposerTestUtils from vts/functional to
utils/vts.
Test: make VtsHalGraphicsComposerV2_1TargetTest
Change-Id: Ic3042aa7f2578d099fbe79039b60892bd0e87f25
Better include path (#include <mapper-vts/2.0/MapperVts.h>), better
library naming, and move GraphicsMapperHidlEnvironment to where
tests are defined.
Test: VTS
Change-Id: I9fbf6515993ac11852b11ca6b8194a58afe5579a
Add new methods to support HDR, video readback mechanism and
additional power mode.
Test: adb shell /data/nativetest/VtsHalGraphicsComposerV2_2TargetTest/VtsHalGraphicsComposerV2_2TargetTest
Bug: 71513501
Change-Id: I45596df6c5a2a726e12f524e82681aef4bcbe180
In preparation of new hwcomposer interface, updating
existing includes to include specific version.
Note: IComposerCommandBuffer.h was moved, renamed and clang
formated, but otherwise had no code changes.
Bug: 71513561
Test: compile
Change-Id: If34cb6f63012592a245708109590653ace7009f5
ComposerClient destroys its internal model of the display while handling
the onHotPlug event from the Hwc. Subsequently SurfaceFlinger destroys
its model of the display, and destroys all Hwc layers associated with
the display.
This fixes the code for destroying layers to not dereference an invalid
iterator if the display does not exist, allowing destruction to
continue.
It also fixes a similar issue which could occur if a HWC layer is being
created for a display at around the same time as the disconnect event.
Test: hotplug disconnect no longer crashes
Bug: 38464421
Change-Id: I0f2d28fe89fccf997b4bbb9fa6b5c0e6a6e49b93
There is no cap defined for PRESENT_OR_VALIDATE_DISPLAY in HIDL so
it must always work. Make sure it does not call HWC2 presentDisplay
when the underlying HWC2 does not support
HWC2_CAPABILITY_SKIP_VALIDATE.
Bug: 70407085
Test: boots
Change-Id: I54a4400e09e669c5064f05739f595ed978dcc713
FB (framebuffer) HAL has been replaced by HWC HAL for 5+ years, but
we still support the legacy path in SurfaceFlinger. Devices using
the legacy path cannot be Treblized.
This change allows such devices to use HIDL IComposer, by adding
support for FB HAL in the default implementation.
Test: boots hikey960
Change-Id: Ie9050bbcaac0fd5b134786f4f9f0f5075f4ebd0c
After initialization or onRefresh, we want to make sure
validateDisplay is called before presentDisplay.
Bug: 67505273
Test: manual
Change-Id: Id876d9251586aaaf552ca82c52f8f902af364251
The hardware composer service has a rule that only one client can be
connected at a time. The surface flinger process, when transitioning
composer ownership from surface flinger to vr flinger, will destroy the
current client on one thread and create a new client on another
thread. Although surface flinger ensures that these events happen in the
expected sequence (delete then create), the requests sometimes land in
the hardware composer service in inverted order, causing the creation
request to fail with an error.
Instead of failing with an error, block for a brief period (1 second)
until the existing client is removed, then proceed to initialize the new
client. This gives us enough time to ensure an inverted
creation/destruction order doesn't cause client creation to fail, while
avoiding a deadlock if the existing client is never destroyed.
Bug: 62925812
Test: - Transitioned to/from vr flinger hundreds of times, and confirmed
I no longer see sporadic composer client creation failure due to an
already existing client.
- Ran the vts graphics composer tests and confirmed they all pass.
Change-Id: I40be1fb0cb3d42ddb5a9fc159188886e9f5b6267
After initialization or onRefresh, we want to make sure
validateDisplay is called before presentDisplay.
Bug: 67505273
Test: manual
Change-Id: Id876d9251586aaaf552ca82c52f8f902af364251
To prevent property name collisions between properties of system and
vendor, 'vendor.' prefix must be added to a vendor HAL service name.
You can see the details in http://go/treble-sysprop-compatibility.
Test: succeeded building and tested on a walleye device
Bug: 36796459
Change-Id: I4e8fbee791ec917a8f627a1366f4d44ec7e6febc
Our use of message queues is synchronous. If there are already data
in the queue when writeQueue is called, we know they are stale and
can be discarded.
Bug: 65449888
Test: manual
Change-Id: Ie29b8a7386c9733c183a6c3569e3572efa62cbc2
* For registerTestService/getServiceName, no need to pass
any hard coded string of HAL service FQName.
* Affect test: VtsHalCameraProviderV2_4TargetTest,
VtsHalGraphicsComposerV2_1TargetTest,
VtsHalNeuralnetworksV1_0TargetTest
Bug: 62946472
Bug: 64203181
Test: make vts
vts-tradefed run vts -m VtsHalCameraProviderV2_4Target
Merged-In: If365ab2ed9a91eb4013d71769804b9d4bf089d66
Change-Id: Id0bddbc2949337147557f45cc60dbfaa114ce25e
(cherry picked from commit d71b654d6d)
* For registerTestService/getServiceName, no need to pass
any hard coded string of HAL service FQName.
* Affect test: VtsHalCameraProviderV2_4TargetTest,
VtsHalGraphicsComposerV2_1TargetTest,
VtsHalNeuralnetworksV1_0TargetTest
Bug: 62946472
Bug: 64203181
Test: make vts
vts-tradefed run vts -m VtsHalCameraProviderV2_4Target
Change-Id: Id0bddbc2949337147557f45cc60dbfaa114ce25e
* Update to run against different service names.
Bug:38348289
Bug:64203181
Test: make vts
vts-tradefed run vts -m VtsHalGraphicsComposerV2_1TargetTest
Change-Id: I7c4643935cf5f0ea63b0a97d3079559d9c4f5ec2
These tests now statically links to HAL def libs which are
not guaranteed to be on the device.
Bug: 64040096
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalGraphicsMapperV2_0Target
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalGraphicsComposerV2_1Target
Change-Id: I83b68dafbd161f88394f67dbda14f9957ddf7232
Update the Android.bp generated with hidl-gen.
Test: build with and without BOARD_VNDK_VERSION=current
Bug: 63866913
Change-Id: I1a9db1df49e0f13c5790da2b118ae9ec63ba34a7
Allow HAL definition libs to be static.
Bug: 32920003
Bug: 64040096
Test: update-all-google-makefiles.sh
Change-Id: I1483d572bea6799717d1614fb7d52fe225e31104
The hardware composer service has a rule that only one client can be
connected at a time. The surface flinger process, when transitioning
composer ownership from surface flinger to vr flinger, will destroy the
current client on one thread and create a new client on another
thread. Although surface flinger ensures that these events happen in the
expected sequence (delete then create), the requests sometimes land in
the hardware composer service in inverted order, causing the creation
request to fail with an error.
Instead of failing with an error, block for a brief period (1 second)
until the existing client is removed, then proceed to initialize the new
client. This gives us enough time to ensure an inverted
creation/destruction order doesn't cause client creation to fail, while
avoiding a deadlock if the existing client is never destroyed.
Bug: 62925812
Test: - Transitioned to/from vr flinger hundreds of times, and confirmed
I no longer see sporadic composer client creation failure due to an
already existing client.
- Ran the vts graphics composer tests and confirmed they all pass.
Change-Id: I40be1fb0cb3d42ddb5a9fc159188886e9f5b6267
We should call native_handle_clone instead of IMapper::importBuffer
on sideband stream handles.
Bug: 63707399
Test: manual
Change-Id: Ie07e50f6bb771f3c7a69d29e36f60b149dc6af95
Split up utility classes that can be re-used in other IComposer related
tests (such as the IVrComposerClient tests).
Changes:
* Move GraphicsComposerCallback into separate module
* Extract TestCommandReader in separate module
* Extract Composer::execute() from test class
Bug: 38203529
Test: Compiled
Change-Id: I0d1193469e9dd94c477a63058f98111c162dfa99
There are implmentations that can dead lock when calling certain
functions in certain states. It works fine before HIDL because
SurfaceFlinger calls those functions in another thread. We allow
for 4 hwbinder threads in this commit to simulate how SurfaceFlinger
calls hwcomposer.
Bug: 38183197
Test: camera, videos, multi windows, screencap, screenrecord
Change-Id: Ie05b2ca349b8c1ed9a3ac962981434f2efee92d9
android.hidl.base@1.0 and android.hidl.manager@1.0 are built into libhidltransport.
Test: links
Bug: 33276472
Merged-In: I08aaad80f7e2fc262aa3a8b66fe932e8133a928d
Change-Id: I08aaad80f7e2fc262aa3a8b66fe932e8133a928d
When setLayerBuffer() was called on a layer previously destroyed by
destroyLayer() the code would crash. Instead, return an error.
Bug: 37159844
Test: Ran vr flinger in a way that would trigger the crash, and
confirmed that I now get error logs instead of crashing. Unfortunately
the error code is consumed by the Composer wrapper class and not
propagated back to the caller, but that's a separate issue (b/37901601).
Change-Id: I75a5b954d47a1deac44d03851f60f347085eca89
We must use the mapper HAL instead of gralloc0/gralloc1 from the
composer.
Bug: 37540361
Test: boots on marlin, angler, and ryu
Change-Id: I5a3ff6a025bf51a3507a4f33fa77e9506a6f1ec9
By setting vendor_available, the following may become true:
* a prebuilt library from this release may be used at runtime by
in a later releasse (by vendor code compiled against this release).
so this library shouldn't depend on runtime state that may change
in the future.
* this library may be loaded twice into a single process (potentially
an old version and a newer version). The symbols will be isolated
using linker namespaces, but this may break assumptions about 1
library in 1 process (your singletons will run twice).
Background:
This means that these modules may be built and installed twice --
once for the system partition and once for the vendor partition. The
system version will build just like today, and will be used by the
framework components on /system. The vendor version will build
against a reduced set of exports and libraries -- similar to, but
separate from, the NDK. This means that all your dependencies must
also mark vendor_available.
At runtime, /system binaries will load libraries from /system/lib*,
while /vendor binaries will load libraries from /vendor/lib*. There
are some exceptions in both directions -- bionic(libc,etc) and liblog
are always loaded from /system. And SP-HALs (OpenGL, etc) may load
/vendor code into /system processes, but the dependencies of those
libraries will load from /vendor until it reaches a library that's
always on /system. In the SP-HAL case, if both framework and vendor
libraries depend on a library of the same name, both versions will be
loaded, but they will be isolated from each other.
It's possible to compile differently -- reducing your source files,
exporting different include directories, etc. For details see:
https://android-review.googlesource.com/368372
None of this is enabled unless the device opts into the system/vendor
split with BOARD_VNDK_VERSION := current.
Bug: 36426473
Bug: 36079834
Test: m -j libhwcomposer-client
Test: attempt to compile with BOARD_VNDK_VERSION := current
Change-Id: I735b861fcc25bc1048ce0ce3ad48432980248b06
Revise IAllocator and IMapper to reduce IPC and to support gralloc0
devices.
Specifically, IAllocator is trimmed down to have essentially only
allocate(BufferDescriptor descriptor, uint32_t count)
generates (Error error,
uint32_t stride,
vec<handle> buffers);
The ability to allocate buffers with shared backing store is
removed. ProducerUsage and ConsumerUsage are moved to the
graphics.common package and are merged and renamed to BufferUsage.
BufferUsage's bits follow gralloc0.
IMapper gains
typedef vec<uint32_t> BufferDescriptor;
createDescriptor(BufferDescriptorInfo descriptorInfo)
generates (Error error,
BufferDescriptor descriptor);
where BufferDescriptor is an implementation-defined blob. lockFlex
is replaced by lockYCbCr. All getters are removed.
Reference counting with retain/release is replaced by
importBuffer/freeBuffer.
Most if not all gralloc1 features are not used by the runtime yet.
There is also not too much test written for them. As such, they
tend to behave differently between implementations and cannot be
used reliably.
Bug: 36481301
Test: builds and boots on Pixel
Change-Id: I1d31105120517ea2c128c7a19297acf3bfd312bb
This has been copy pasted and isn't actually required.
Test: all hals manually tested to work on internal marlin (which have them binderized).
Note: tv hals not tested (and they never have been). Filed b/36562029
Note: for thermal hal, could only run VTS/check logs for errors.
Test: lshal outputs proper stuff
Fixes: 31928447
Change-Id: Id1be584dc0fa2d70e9189b922335146bf6d1382d
Remove undeclared dependency of libhwcomposer-client on Hwc.h which
created a circular dependency.
Test: Manual
Change-Id: I74d5c4e2db5d247f8b406d1ea42fece41e76659d
We cannot lookup _and_ update buffer cache entry in lookupBuffer.
The old buffer is still in use by hwcomposer2. Add updateBuffer to
do the update after the new buffer has replaced the old buffer in
hwcomposer2.
While at it, s/BufferClone/BufferCacheEntry/g.
Bug: 36064845
Test: manual
Change-Id: I59b61c0198ad528c40020fdebbe27a6cc359226f
Perform a final presentDisplay to clear the screen and get HWC2 out
of any special state (e.g., some implementations put themselves in
special states between validateDisplay and presentDisplay). Our
only portable choice really is to abort(), but that is not an option
because we have other clients such as VTS or VR.
Bug: 35872161
Test: manual
Change-Id: I9028705607d1b86d418a379c6e90e833d638b3f5
Add libVtsHalGraphicsComposerUtils which provides a wrapper to
IComposer. Port tests to be based on
libVtsHalGraphicsComposerUtils.
Test: manual
Change-Id: I400c347b54702c3d45954e6cdc101d3dc1241efd
The getService() and registerAsService() methods of interface objects
now have default parameters of "default" for the service name. HALs
will not have to use any service name unless they want to register
more than one service.
Test: builds
Bug: 33844934
Change-Id: I0c7987ffa7b22bb7386a4a1320242b3248e434e4
The getService() and registerAsService() methods of interface objects
now have default parameters of "default" for the service name. HALs
will not have to use any service name unless they want to register
more than one service.
Test: builds
Bug: 33844934
Change-Id: Ic3859ccf21e7ee5177f47cb06e3e0c93dd572bf6
The getService() and registerAsService() methods of interface objects
now have default parameters of "default" for the service name. HALs
will not have to use any service name unless they want to register
more than one service.
Test: builds
Bug: 33844934
Change-Id: I3d51429681d834f53dc5f6765e97675eafdceda4
We need google shims on the vendor partition because they are providing
an implementation of a vendor defined interface. They were written by
google just as a courtesy/to make the transition easier. They're
basically a set for vendors to assemble their hal implementations
from.
Bug: 34135607
Test: marlin persist.hal.binderization on/off
Change-Id: I2e2af5af39264cf290259755bb9b2eb9827a21f5
Make IComposer default implementation use the same process scheduler
as SurfaceFlinger does.
Bug: 35210697
Test: manual
Change-Id: Ie2ebe1d3fd26505984d9f6c33d63b5db36b0b64a
It is always on now and all buffers be cloned and registered.
Clients (SF) should make use of the buffer caching mechanism and
pass each unique buffer once, to avoid the overhead.
Test: manual
Change-Id: I74ccbf74e110c8b413a66cfc60044b71ba3f44e3
Decouples the ComposerClient code which deals with parsing the command buffer
messages sent by SurfaceFlinger from the Hwc code that handles the
commands.
Bug: 33297270
Test: Compiled and verified on device that hwcomposer-2-1 service can
start correctly. SurfaceFlinger can connect to the service and the
system boots up. Also verified SurfaceFlinger runs correctly without
hwcomposer-2-1.
Change-Id: I43357306caea57d262735f4756c379ba9d0138cd
CommandWriter will be used as a base class in extensions of HWC. Renamed
for consistency.
Bug: 33297385
Test: Compiled
Change-Id: Iabe59f37157062961b916d55108cb9f4fb792619
Rewrite libgralloc1-adapter to be based on Gralloc1On0Adapter.
Previously, the adapter targeted maximum portability and maximum
performance. The rewritten adapter targets ease of use instead.
This also fixes a bug in the adapter's GRALLOC1_FUNCTION_RELEASE. The
function does not imply native_handle_close/native_handle_delete. As a
result, IMapper and IComposer are also fixed to close/delete handles.
Test: builds and boots
Change-Id: I5c071453dc950583087ae07967bca2c22866c538
Threadpool can now be configured/joined if needed with
configureRpcThreadpool() / joinRpcThreadpool().
Bug: 31226656
Test: mma
Change-Id: I0d7d9924cc8c8851cc2b61ebdae906204909890e
Pointers are preferred for output parameters in graphics code. While at
it, initialize local variables that are for outputs.
Test: builds and boots
Change-Id: I959706ea92949bc2f993ee9beff0c8b0c3121347
Plane alpha was being sent as a float but read as unsigned, which, when
converted to a float was causing things that were supposed to be
translucent to be opaque.
Bug: 33739111
Bug: 33737738
Test: Scrim behind modal dialogs is translucent and there is no more
glitch when rotating apps
Change-Id: I6896bdbb9928bd1aa7265b3ef25a7a96d54ee227
Similar to IAllocator, introduce IComposerClient to manage resources.
Rework the interface such that most state changing calls are batched in a
"command buffer" and execute together. The goal is to reduce the number
of IPC calls needed to set up the composer.
Test: builds and boots
Change-Id: I324009243234c4d2482ca0ef2591377b11530fc9
Remove duplicated types from allocator@2.0 and composer@2.1. Those types
are now in common@1.0.
Bug: 32238126
Test: builds and boots
Change-Id: Ibdb907e47969f5a5a98a14a2e2b77a9c5880beff
To allow genrules with more than one tool, rename the tool property to
tools and make it an array, replace $tool with $(location <label>),
and use $() for other variables for consistency.
Bug: 31948427
Test: compare build.ninja
Change-Id: I3d714f70a2af0dc60faeee10e09b6ed166601f1d
Since HALs might run binder services, we need to start thread pool for
both binder and hwbinder.
Bug: 32021609
Test: builds and boots
Change-Id: I9779e86b1e611a180b1984af36c417dafc3329bc
