On the main thread, the siginfo pointer will never be nullptr.
Add a CHECK to make sure this is true.
Test: Unit tests pass both 32 bit and 64 bit.
Test: Ran with debug.debuggerd.translate_proto_to_text set to 0
Test: to exercise old path.
Change-Id: I9d5ed0de5d652de8a4f9cd85eb57cbb1ec676404
This code was added, but a svelte config still tries to use scudo
related code that doesn't exist.
Bug: 201007100
Test: Ran unit tests on normal config.
Test: Ran unit tests on svelte config.
Change-Id: Ic84bae37717d213121aef182bac2f82dbee25213
strerror is nice, but usually I don't care about the text, I care about
the uppercase enum
Bug: N/A
Test: N/A
Change-Id: I8ea86220cb04cbded701379c47b8aba8ea8864b8
I was here because we have a case where timeout(1) kills logcat, but
debuggerd alleges that the process that was killed had started less than
a second ago. I'm not sure this is the problem there, but I did notice
that far too many tombstones were claiming improbably short process
uptimes. It turns out that the code was measuring the *thread* uptime,
not the *process* uptime.
Also simplify the code a bit by switching to sysinfo(2) rather than
reading a file.
Test: manual, plus the existing unit test
Change-Id: Ie2810b1d5777ad9182be92bfb3f60795dc978b24
The libunwindstack code will attempt to dlopen the libdexfile.so
when a dex pc is found. Unfortunately, this failed since that
library was not properly listed as a runtime library. To make
sure this doesn't happen again, add an end to end test that
will create a dex pc frame, and will verify the correct
dex function name is in that frame.
Bug: 199043576
Test: Unit test passes on arm/aarch64/x86/x86_64.
Test: Removed the runtime_libs of libdexfile from libunwindstack
Test: and verified the new test fails.
Change-Id: I3a11f9ee44e06e37a547d193b04f7fbb90ccfe0a
The output.text.fd value is only ever -1 when there is a failure.
There is no need to check both < 0 or -1, so only check for -1.
Test: Unit tests pass.
Test: Verified the message is seen on intercept and not on
Test: regular crashes.
Change-Id: I1eddcd5d2342b268ceb261b246c98b10cee85bb4
Revert "Allow visibility on libdexfile for all libdexfile_suppor..."
Revert "Add libdexfile runtime dependency of libdexfile_support."
Revert "Add libdexfile runtime dependency of libdexfile_support."
Revert submission 1810760-libdexfile-runtime-2
Reason for revert: DroidMonitor: Potential culprit for Bug 198352910 - verifying through Forrest before revert submission. This is part of the standard investigation process, and does not mean your CL will be reverted.
Reverted Changes:
If4da968e4:Add libdexfile runtime dependency of libdexfile_su...
I80162942a:Allow visibility on libdexfile for all libdexfile_...
Iab18abc8e:Add libdexfile runtime dependency of libdexfile_su...
I473d146d8:Add libdexfile runtime dependency of libdexfile_su...
Change-Id: Iacab8e0a5c74e0c3185a155e35c28903aa9acb4a
When the switch was made to dump the tombstone from the protobuf,
the fault address marker in the maps section went missing. Re-add
that logic and add new unit tests to verify all of the different
behaviors.
Bug: 193935960
Test: All unit tests pass.
Test: All unit tests pass when setprop debug.debuggerd.translate_proto_to_text 0
Test: The above on cuttlefish, 32 bit and 64 bit.
Test: The above on a flame, 32 bit and 64 bit.
Change-Id: I098bb6ab4bacacae2ca0fc5ec9a73549ed0b9489
The "missing output fd" message can seem like an error, so modify
the message to indicate what is really happening. This message
will occur normally when running the debuggerd command, or when
a bugreport is generated, or when an ANR occurs. In all of those
cases, this is not an error, but an expected action.
Bug: 196189981
Test: Ran debuggerd -b and debuggerd and verified this message is seen.
Test: Ran unit tests.
Change-Id: I6e3d5a76d92b972c77fca301ea7147745bc67c37
The tombstone will add a newline after the abort message, so remove
any trailing newlines before saving/printing.
Bug: 196414062
Test: Unit tests pass.
Test: Set system property debug.debuggerd.translate_proto_to_text to 0
test: and unit tests still pass.
Change-Id: I0d3dc215eb5d8be93d99e5b9d4f0a14b1d61396d
A lot of things had moved out of system/core/ without their TEST_MAPPING
entries having gone with them, reducing the amount of presubmit coverage
for those things.
In order to reduce the likelihood of that happening again, I've pushed
all that remained in the system/core/ TEST_MAPPING down into the
individual subdirectories.
Test: treehugger
Change-Id: Ib75d65f9200fa64ae1552471da6fbe5b7023cf94
After compiler update, infinite side effect free loops are replaced with trap
instructions. So use -fno-finite-loop to disable this behavior.
Bug: 196162833
Test: run debuggerd_test.
Change-Id: I057263360a5df64af18c17a025fab48887d0b470
When running debuggerd from the command line, it's possible that
the signal will happen on a side thread. The original intercept
in tombstoned is set to only handle crashes from the main thread
pid, so in this case, the intercept doesn't occur. To fix this,
modify the code so that running debuggerd always sends the signal
to the main pid. In addition, modify the signal handler is entered
due to the BIONIC_SIGNAL_DEBUGGER signal, then the crashing tid is
set to the main thread pid instead of the current thread.
Add unit test to cover this case.
Bug: 194346289
Test: All unit tests pass.
Test: Verify the new unit test is getting the signal on the non-main
Test: thread and still properly handling the intercept.
Test: Modify the debuggerd code to send the signal to the non main pid
Test: and verify the dump still occurs correctly.
Change-Id: I2dd1bd11fc8ef4a6fe87f05ecc67ae349a101c82
For the new kernel 5.13 heders, there is a new TRAP_PERF value that
needs to be handled.
Test: Builds.
Change-Id: I2c6658ca94423c210db9ad6692ec69f6be69b3f5
Dumping stack in ANR can fail, but error message is only printed
to logcat. To allow easier debugging of such cases we add the
error messages in the ANR file as well.
Also factor out some duplication, inline single-call functions to
their call sites, and make some of the lambdas clearer by only having
implicit state unrelated to their primary purpose in captures but
passing as arguments things they fundamentally need to do their job
(and actually adding some duplication for time_left() which was subtle
enough to fool me into thinking that we only needed one call of
set_timeout(), which I've renamed to update_timeout()).
Bug: 191172191
Test: Manual
Change-Id: I39a50ca5b72059bfeff48b010d3be44f19eb32fa
writepid command usage to join a cgroup has been deprecated in favor
of a more flexible approach using task_profiles. This way cgroup path
is not hardcoded and cgroup changes can be easily made. Replace
writepid with task_profiles command to migrate between cgroups.
Bug: 191283136
Test: build and boot
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I945c634dfa7621437d8ea3981bce370d680b7371
Using thread cache will cause SIGSEGV for 32bit+kernel4.9 device.
Bug: 190579082
Bug: 189803009
Test: run cts -m CtsSeccompHostTestCases
Change-Id: I47b13d02674aadbacd8dac36d8382eed0885413c
Signed-off-by: yidong zhang <yidong.zhang@amlogic.com>
I'm guessing that the original
F crash_dump64: crash_dump.cpp:460] failed to attach to thread 1671, already traced by 0 ()
was probably a race, where there _was_ a tracer but they disappeared?
Whatever, it doesn't seem helpful to show "already traced by nobody",
and we also don't want to clobber errno in the fallthrough case
(previously just where get_tracer() failed, but now also where
get_tracer() returns "nobody").
Bug: http://b/188668580
Test: treehugger
Change-Id: I3fa3b4f7e32531d48dfbb0ef946ff351ed5d9171
All but three files are Apache-2.0 already.
Bug: http://b/191499510
Test: /google/src/files/head/depot/google3/wireless/android/busytown/ayeaye/analyzers/copyright/tools/scan_android_project.sh ~/aosp/system/core/debuggerd/ | grep -v APACHE
Change-Id: I430c3382dd160e398f02470d7053ecea39c98f41
The code in the fallback path calls pthread_key_create when using the
normal thread cache. However, this code is executed out of the linker,
which means that the call doesn't see keys created by the libc version
of pthread_key_create. As of now, simply avoid using the thread cache
to avoid this problem.
Bug: 189803009
Test: debuggerd -b on a media process on a 32 bit Android Go device
Test: and observe no crash.
Test: debuggerd unit tests pass.
Change-Id: I9ca1a55e44d3bb69d49450826d7d64d7a64145c3
(cherry picked from commit 49e5a76544)
This information clearly meets the bar for being dumped to logcat. If we
omit the info, we may confuse the user into thinking that it's not
available at all, especially if it's their first time seeing an MTE
report.
This also adds some functionality to the integration testing library to
pull logcat messages and scan them to make sure the contents are in both
places.
Bug: 187881237
Test: atest debuggerd_test # on QEMU w/ MTE.
Change-Id: Icc17ea45bda7628331cc4812eaad3bc5c949b7a7
This type of error is unlikely and attempting to detect it with MTE
is likely to produce false positive reports. Make sure that this type
of error is not detected by the allocator.
Change-Id: I90676d1a031411d6b725890311317802bc24b459
This does not currently cause any problems but it does block progress
on the referenced bugs.
Bug: 187910671
Bug: 187914588
Test: m droid
Change-Id: I977cd842101187441ddbc873eac25598295aab06
When moving to the proto-ized tombstones, the note about unreadable
elf files in a backtrace got lost. This re-adds it and adds a test
to verify that the note properly shows up.
Bug: 185428454
Test: Ran unit tests.
Change-Id: I1150cc737772e1b79fd73ec5c782caadc4629421
