I thought it was OK to use "using" in a header file so long as it was
inside a "namespace" block, but it just imports symbols from one
namespace into another, so things that shouldn't work do.
Test: Treehugger
Change-Id: I4d43d35339636af7e95761cada7120b4db638c01
* changes:
Don't export storeKey(), and update comments
Always use RenameKeyDir() when moving/renaming key directories
Make RenameKeyDir() use IsSameFile()
storeKey() is no longer used outside KeyStorage.cpp, so make it a static
function. Also fix the documentation for storeKey() (e.g. it's no
longer safe to directly move/rename directories created by storeKey() --
one must use RenameKeyDir() instead).
No functional changes.
[ebiggers@ - cleaned up slightly from satyat@'s original change]
Bug: 190398249
Change-Id: I85918359e77bef414dfddfe5ded30fcde6514013
Make fixate_user_ce_key() use RenameKeyDir() to rename key directories
so that any deferred commits for these directories are also updated
appropriately.
This fixes a potential lost Keymaster key upgrade if a key were to be
re-wrapped while a user data checkpoint is pending. This isn't a huge
issue as the key will just get upgraded again, but this should be fixed.
[ebiggers@ - cleaned up slightly from satyat@'s original change]
Bug: 190398249
Change-Id: Ic6c5b4468d07ab335368e3d373916145d096af01
Comparing paths is error-prone (e.g. "/foo/bar" vs "/foo//bar"), so
entries in key_dirs_to_commit are compared using inode and device
number. However RenameKeyDir() breaks this rule and compares raw paths.
Avoid this quirk by finding the entry in the list to replace before
doing the rename.
This doesn't fix any known problem, as vold is fairly consistent with
its paths in practice; this is just a robustness improvement.
Bug: 190398249
Change-Id: I3ce2c0119cb2012ac9d12849570e56600bc23867
ensure_subdirectory_unmounted() was ignoring the return value from
umount(), so it wasn't possible to tell whether it succeeded or failed.
Make it log an error message on failure.
Also, there might be cases where ensure_subdirectory_unmounted() fails
initially but would succeed later, e.g. due to files in a subdirectory
mount being open and requiring processes to be killed. To make this
more robust, keep calling ensure_subdirectory_unmounted() before each
attempt of umount("/data").
I'm not sure whether this will actually fix bug 189250652, as it hasn't
been root-caused yet, but this might help.
Bug: 189250652
Change-Id: I979b12d3c6a88fe3335ff548b1f8a5db43683c4f
When a user is removed, vold is deleting the subdirectories of
/data/misc/vold/user_keys/ce/${user_id} but not that directory itself.
This is unexpected, as none of the user's directories should be left
around. Delete it too.
Bug: 188702840
Test: pm create-user foo
pm remove-user 10
stat /data/misc/vold/user_keys/ce/10 # no longer exists
Change-Id: Id4033a668fa6de1debb9ba6fdd1351c940bd35fc
storeKeyAtomically() stores keys in a temp directory before renaming
that directory to the real target directory. However when the key is
stored in the temporary directory, the Keymaster storage key might get
upgraded, and it's possible that the temp directory is scheduled for a
deferred commit. storeKeyAtomically() renames that temp directory, but
doesn't update the list of directories marked for deferred commit.
This patch fixes this by removing the temp directory from the list and
adding the real target directory to that list instead.
This bug was found when trying to switch from using the guest keymint to
using the host remote keymint implementation on cuttlefish
(aosp/1701925). The device triggers this bug (and boots to recovery)
when aosp/1701925 is cherry-picked.
Co-Developed-By: Eric Biggers <ebiggers@google.com>
Test: Cuttlefish boots with and without aosp/1701925
Change-Id: I3b6fd6ad32ed415da94423cca6f5a121c16472f2
* changes:
Remove unused constants and cleanup KeyStorage.cpp
Remove unused parameter "salt" from stretchSecret()
Use AServiceManager_waitForService() to connect to keystore2
Now that the salt and hardware auth token related code has been removed,
we can remove the associated (and now unused) constants.
Also cleanup some comments and remove includes related to hardware auth
token support.
Bug: 181910578
Test: Cuttlefish boots.
Change-Id: I3733d5c6bbf6989adc165c554ee53faa2484f4b6
stretchSecret() no longer uses the "salt" parameter, so remove it and
simplify callers
Bug: 181910578
Test: Cuttlefish boots.
Change-Id: Ic2d0742b22b98a66da37f435e274c9d385b8e188
Vold currently uses AServiceManager_getService() to connect to
keystore2, which has an internal timeout of 5s. Since a lot of vold
keystore2 connection failures are fatal, we instead use
AServiceManager_waitForService(), which will wait efficiently for
keystore2 to start, instead of timing out after 5s.
Bug: 185934601
Test: Cuttlefish boots.
Change-Id: Ib4e977a997e020082382e0686f448d1aa72834ec
In wait_and_unmount(), kill the processes with open files after umount()
has been failing for 2 seconds rather than 17 seconds. This avoids a
long boot delay on devices that use FDE.
Detailed explanation:
On FDE devices, vold needs to unmount the tmpfs /data in order to mount
the real, decrypted /data. On first boot, it also needs to unmount the
unencrypted /data in order to encrypt it in-place.
/data can't be unmounted if files are open inside it. In theory, init
is responsible for killing all processes with open files in /data, via
the property trigger "vold.decrypt=trigger_shutdown_framework".
However, years ago, commit 6e8440fd50 ("cryptfs: kill processes with
open files on tmpfs /data") added a fallback where vold kills the
processes itself. Since then, in practice people have increasingly been
relying on this fallback, as services keep being added that use /data
but don't get stopped by trigger_shutdown_framework.
This is slowing down boot, as vold sleeps for 17 seconds before it
actually kills the processes.
The problematic services include services that are now started
explicitly in the post-fs-data trigger rather than implicitly as part of
a class (e.g., tombstoned), as well as services that now need to be
started as part of one of the early-boot classes like core or early_hal
but can still open files in /data later (e.g. keystore2 and credstore).
Another complication is that on default-encrypted devices (devices with
no PIN/pattern/password), trigger_shutdown_framework isn't run at all,
but rather it's expected that the relevant services simply weren't
started yet. This means that we can't fix the problem just by fixing
trigger_shutdown_framework to kill all the needed processes.
Therefore, given that the vold fallback is being relied on in practice,
and FDE won't be supported much longer anyway (so simple fixes are very
much preferable here), let's just change wait_and_unmount() in vold to
use more appropriate timeouts. Instead of waiting for 17 seconds before
killing processes, just wait for 2 seconds. Keep the total timeout of
20 seconds, but spend most of it retrying killing the processes, and
only if the unmount is still failing.
This avoids the long boot delays in practice.
Bug: 187231646
Bug: 186165644
Test: Tested FDE on Cuttlefish, and checked logcat to verify that the
boot delay is gone.
Change-Id: Id06a9615a87988c8336396c49ee914b35f8d585b
Otherwise only the pids are shown, and it's hard to tell which
processes actually got killed.
Bug: 187231646
Change-Id: Icccf60d0ad4439d702f36ace31abe092df1c69c2
Otherwise, when system removes user's volume, it will hang
as there are mounts (obb and data mounts) still remain mounted in system.
Bug: 187122943
Test: atest UserLifecycleTests#managedProfileUnlock_stopped, it's not blocked anymore
Change-Id: Ic37985f98e6cbfe4fa38b981d3332c4dfc40c5b8
Otherwise, the only sign of what went wrong may be system_server
logging a "ServiceSpecificException".
Bug: 187079978
Change-Id: I59b2ba2b0e679dfd1ec1fd8fff6790256fbfdf29
Originally it kills all the apps with obb and data mounted.
Due to recent changes, all apps will have obb and data dirs mounted
in default root namespace. Hence all apps will be killed by
by KillProcessesWithMounts().
To fix this, we also check if the dir is mounted as tmpfs,
as the default namespace one is bind mounted to lowerfs,
which app data isolation is mounted as tmpfs, so we only
kill the process that have obb dir mounted as tmpfs.
Bug: 148049767
Test: Able to boot without warnings
Change-Id: I5f862ad6f64f5df739b68ea7c9815352bae3be5c
Merged-In: I45d9a63ed47cbc27aebb63357a43f51ad62275db
Fix KeymasterOperation::updateCompletely() to not treat an empty output
as an error, since for RSA signing (used by cryptfs / FDE) it is
expected that the output from update() be empty. The output is instead
produced at the end by finish().
This is one of a set of changes that is needed to get FDE working again
so that devices that launched with FDE can be upgraded to Android 12.
Bug: 186165644
Change-Id: Icf120f8b9526d051d0ebe16bc8ad1edf712241e1
This CL updates vold to use the updated storage key API that provides an
optional upgraded key blob. In this patch the upgraded key blob is not
yet stored by vold.
Bug: 185811713
Test: N/A
Change-Id: I39eeb20df0eb2b023479f3adebab264d29d00048
It's very useful to see the mkfs log in console to debug any issues.
Bug: 172378121
Signed-off-by: Jaegeuk Kim <jaegeuk@google.com>
Change-Id: Icdac3609860cf0bba3fa758cead885bd4960f2c0
This is needed so that system_server can remind itself about which users
have their storage unlocked, if system_server is restarted due to a
userspace reboot (soft restart).
Bug: 146206679
Test: see I482ed8017f7bbc8f7d4fd5a2c0f58629317ce4ed
Change-Id: I02f0494d827094bd41bcfe5f63c24e204b728595
(cherry picked from commit 1799debfd6)
* changes:
Remove Keymaster::isSecure() and simplify callers
Make vold use keystore2 instead of keymaster
Remove HardwareAuthToken support from vold::Keymaster
Now that isSecure() always returns true, we can remove it and simplify
all the callers (i.e. cryptfs). Refer to the commit description for
Iaebfef082eca0da8a305043fafb6d85e5de14cf8 for why this function always
return true.
Bug: 181910578
Test: Cuttlefish and bramble boot
Change-Id: I185dd8180bd7842b05295263f0b1aa7205329a88
Make vold use keystore2 for all its operations instead of directly using
keymaster. This way, we won't have any clients that bypass keystore2,
and we'll no longer need to reserve a keymaster operation for vold.
Note that we now hardcode "SecurityLevel::TRUSTED_ENVIRONMENT" (TEE)
when talking to Keystore2 since Keystore2 only allows TEE and STRONGBOX.
Keystore2 presents any SOFTWARE implementation as a TEE to callers when
no "real" TEE is present. As far as storage encryption is concerned,
there's no advantage to using a STRONGBOX when a "real" TEE is present,
and a STRONGBOX can't be present if a "real" TEE isn't, so asking
Keystore2 for a TEE is the best we can do in any situation.
The difference in behaviour only really affects the full disk encryption
code in cryptfs.cpp, which used to explicitly check that the keymaster
device is a "real" TEE (as opposed to a SOFTWARE implementation) before
using it (it can no longer do so since Keystore2 doesn't provide a way
to do this).
A little code history digging (7c49ab0a0b in particular) shows that
cryptfs.cpp cared about two things when using a keymaster.
- 1) that the keys generated by the keymaster were "standalone" keys -
i.e. that the keymaster could operate on those keys without
requiring /data or any other service to be available.
- 2) that the keymaster was a non-SOFTWARE implementation so that things
would still work in case a "real" TEE keymaster was ever somehow
added to the device after first boot.
Today, all "real" TEE keymasters always generate "standalone" keys, and
a TEE has been required in Android devices since at least Android N. The
only two exceptions are Goldfish and ARC++, which have SOFTWARE
keymasters, but both those keymasters also generate "standalone" keys.
We're also no longer worried about possibly adding a "real" TEE KM to
either of those devices after first boot. So there's no longer a reason
cryptfs.cpp can't use the SOFTWARE keymaster on those devices.
There's also already an upgrade path in place (see
test_mount_encrypted_fs() in cryptfs.cpp) to upgrade the kdf that's
being used once a TEE keymaster is added to the device. So it's safe for
cryptfs.cpp to ask for a TEE keymaster from Keystore2 and use it
blindly, without checking whether or not it's a "real" TEE, which is why
Keymaster::isSecure() just returns true now. A future patch will remove
that function and simplify its callers.
Bug: 181910578
Test: cuttlefish and bramble boot. Adding, switching between, stopping
and removing users work.
Change-Id: Iaebfef082eca0da8a305043fafb6d85e5de14cf8
HardwareAuthTokens are no longer used by vold since Android P. So remove
the auth token parameter from vold. This patch doesn't remove the token
from IVold.aidl, and the methods in VoldNativeService.cpp return an
error if a non-empty auth token is passed to them.
Bug: 181910578
Test: cuttlefish and bramble boot with patch
Change-Id: I1a9f54e10f9efdda9973906afd0a5de5a699ada5
