Get rid of pixel offset variables, and use makefile variables in
BoardConfigs.
Bug: 37779982
Test: Verified vr ui has same behavior.
Change-Id: Ifbf44e27d7101aedbe3c0e6db4b8181d56efadfd
(cherry picked from commit 81a8e4cab2)
Instead of defining device-specific UI class, this CL allows using
Makefile variables to specify margin values directly.
Values explicitly defined via TARGET_RECOVERY_UI_MARGIN_HEIGHT and
TARGET_RECOVERY_UI_MARGIN_WIDTH will be used. Otherwise they will
default to zero.
Bug: 62732748
Test: Specify the height and width and check recovery texts.
Change-Id: Icb6f7466c8d407f877b93da38aebfdf7e6b41be7
(cherry picked from commit a92d8fb456)
We already have outer_width and outer_height in wear UI, and x_offset
and y_offset in VR UI. This CL adds margin_width_ and margin_height_ to
their base class (ScreenRecoveryUI) to shorten the gap. This will be in
general useful for round or round-cornered screens.
Move the density computation to ScreenRecoveryUI ctor so that the value
can be used earlier.
Bug: 62732748
Test: Setting and not setting margin_{width,height}_ on angler. Check the
recovery texts (recovery menu as well as 'View recovery logs').
Change-Id: Ibf6238c9cc8949a42ed8a410e1c09d55b0b5a151
(cherry picked from commit 87f4650874)
A version of screen ui with specific adjustments for vr device
compatibility.
(cherrypick of a44dba7f4e to AOSP)
Bug: 37779982
Test: "adb reboot recovery" to view
Change-Id: If6b0f26c1b587f8d0176060685b5efb6c67593b1
This functions do not change class variables
Would be good to mark them as const, so
class variables are not changed by coincidence
Change-Id: Iea34f6d26dbd1bde813035160e07ff2a681989e6
UI text is broken (doesn't show any text during FDR) due to commit
d530449e54, which reordered the calls to
RecoveryUI::SetLocale() and RecoveryUI::Init().
Because Init() uses the locale info to load the localized texts (from
images), the locale must be set prior to that via SetLocale(). This CL
refactors Init() to take the locale parameter, and removes the odd
SetLocale() API.
Bug: 34029338
Test: 'Run graphics test' under recovery.
Change-Id: I620394a3d4e3705e9af5a1f6299285d143ae1b01
This allows recovery to work on devices without screen.
The stub recovery UI does nothing except print to stdout.
Test: write 'recovery\n--wipe_data\n--reason=wipe_data_from_ota\n'
to misc and boot to recovery on a device without screen.
Bug: 33175036
Change-Id: Icde698aa2e2e29f4b3d0532dfd3c6a939ac2bc63
Clean up the recovery image and switch to libbase logging.
Bug: 28191554
Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35
(cherry picked from commit 747781433f)
Clean up the recovery image and switch to libbase logging.
Bug: 28191554
Change-Id: Icd999c3cc832f0639f204b5c36cea8afe303ad35
Merged-In: Icd999c3cc832f0639f204b5c36cea8afe303ad35
Add support for landscape layouts to the existing portrait support.
Bug: http://b/29418855
Test: tested manually with "Run graphics test" on flounder/fugu/ryu.
Change-Id: Ib4a62bf5f2b8a1cef6028a01f05145104660560a
Add a new command "--security" to boot commands. If this command is
observed as part of BCB, choose a different background text picture
for installing stage in recovery UI. As a result, users will see
"installing security update" instead of "installing system update"
when applying a security update package.
Bug: 27837319
Change-Id: I2e2253a124993ecc24804fa1ee0b918ac96837c5
* Use new animation.
* Use new non-holo progress bars.
* Use recommended spacing for recovery UI.
Bug: http://b/26548285
Change-Id: I8411e89d6a6a9ce638b8645e19e5082d0d968cee
am: 692941be79
* commit '692941be79fd765f8873d810ae627a917dfd791b':
Go back to the old ear-wiggling Android animation.
Change-Id: Ifddb21173e55f9c690dbc0661308575d885f4e76
But keep the new code so we can easily test new animations when we have them.
This change includes tbao's de-interlace script, plus a one-liner that's
necessary to play the animation at the correct speed when there's no
progress bar showing. (This was always a bug, it's just way more noticeable
when your animation only has 7 frames.)
Bug: http://b/28316654
Bug: http://b/26548285
Change-Id: I32c601c352d6be235d1b44f14fca7e125defd77d
Switch to a Wear-like intro/loop system. We don't have an intro yet,
but hopefully this will let Wear delete more code when they move to N.
Unlike them, we don't hard-code the number of frames: we just look to
see what we have available. We do hard-code the fps though.
Also add a graphics test mode so you can see a demo of the UI components
without having to actually apply an OTA.
Also fix a bug where default locale is null rather than en-US: it's
more useful to show _some_ text if we don't have a locale (which should
only be during development anyway).
Bug: http://b/26548285
Change-Id: I63422e3fef3c41109f924d96fb5ded0b3ae7815d
The only difference from SetColor in ScreenRecoveryUI is the that the
LOG messages have slightly different colors. That's not enough to
warrant a duplicate function. So this patch removes SetColor and uses
the parent class version.
This patch also moves the DrawTextLine* functions into ScreenRecoveryUI
since they're mostly the same. It also moves char_width and char_height
into the class instead of keeping them as static variables.
Bug: 27407422
Change-Id: I30428c9433baab8410cf710a01c9b1c44c217bf1
The function that modifies rtl_locale exists only in the base class,
and so the variable should not have a duplicate in the derived class,
otherwise there may be incosistent values when it is read by the derived
class (the thinking being that invoking the function will modify the
base class version of the variable, and not the derived class version).
Remove the updateMutex variable, and instead re-use the one in the base
class.
Also remove LoadBitmap from WearUI since it is identical to the one in
ScreenRecoveryUI.
Bug: 27407422
Change-Id: Idd823fa93dfa16d7b2c9c7160f8d0c2559d28731
This reverts commit 1c7b2230d8.
This change can lead to the derived class indirectly (and incorrectly) calling some functions from the base class, which can lead to unpredictable behavior.
Bug: 27407422
Change-Id: I126a7489b0787dc195e942e2ceea6769de20d70c
This patch performs the following modifications:
- Remove setBackground function, and currentIcon member variable.
- Remove common Progress*, Redraw and EndMenu functions.
Bug: 27407422
Change-Id: Ic3c0e16b67941484c3bc1d04c9b61288e8896808
Signed-off-by: Prashant Malani <pmalani@google.com>
We allow vendor-specific icon installing image but have defined private
animation_fps that can't be overridden. This CL changes the image
generator to optionally embed FPS (otherwise use the default value of
20) into the generated image.
For wear devices, they are using individual images instead of the
interlaced one. Change the animation_fps from private to protected so
that it can be customized.
Bug: 26009230
Change-Id: I9fbf64ec717029d4c54f72316f6cb079e8dbfb5e
When calling ScreenRecoveryUI::ShowFile(), the only thing that gets
inadequately logged is the progress bar. Replace the call to
ScreenRecoveryUI::Print() with ScreenRecoveryUI::PrintOnScreenOnly() for
the progress bar, so we can avoid calling redirect_stdio().
Change-Id: I4d7c5d5b39bebe0d5880a99d7a72cee4f0b8f325
Although stdout and stderr are both redirected to log file with no
buffering, we are seeing some outputs are mixed in random order.
This is because ui_print commands from the updater are passed to the
recovery binary via a pipe, which may interleave with other outputs
that go to stderr directly.
In recovery, adding ui::PrintOnScreenOnly() function to handle
ui_print command, which skips printing to stdout. Meanwhile, updater
prints the contents to stderr in addition to piping them to recovery.
Change-Id: Idda93ea940d2e23a0276bb8ead4aa70a3cb97700
This makes it easier to go back and forth without losing current output.
Also make the display more like regular more(1).
Bug: http://b/20834540
Change-Id: Icc5703e9c8a378cc7072d8ebb79e34451267ee1b
This makes it easier for us to deal with arbitrary information at the
top, and means that headers added by specific commands don't overwrite
the default ones.
Add the fingerprint back, but broken up so it fits even on sprout's
display.
Change-Id: Id71da79ab1aa455a611d72756a3100a97ceb4c1c
Our long-press UI sends KEY_ENTER for long presses, which the long-press
UI treats as equivalent to KEY_POWER in the regular UI. So anywhere we accept
KEY_POWER we should accept KEY_ENTER too.
Change-Id: I99d376c961887043cf02037c26d000c8ba4d66f9
Currently fugu has a custom subclass to handle this. The default code
supports devices with trackballs but not all shipping Nexus devices?
That's just silly.
Change-Id: Id2779c91284899a26b4bb1af41e7033aa889df10
